Home > PAINT & SUNDRIES > SUNDRIES > ROOF & DRIVEWAY > ROOF COATINGS
Sort By:
1 2 3 4
COATING ROOF/FOUNDTION FBRD 1G
COATING ROOF/FOUNDTION FBRD 1G
Our Price: $11.99

COATING NON FIBR/FOUND 3.6QT
COATING NON FIBR/FOUND 3.6QT
Our Price: $13.99

A thin liquid applied coating designed to seal and penetrate exterior concrete and masonry surfaces while providing a moisture barrier. It can also be used as an anti-corrosive coating for below grade steel or metal piping. Seals and protects wood footings from decay and termites. Covers approximately 70 sq. ft. per gallon.
ROOF COATING FIBRED 3.6QT
ROOF COATING FIBRED 3.6QT
Our Price: $13.99

Protective coating that provides a waterproof barrier over the existing roof surface. May be used over composition and built-up roofs. Fiber-reinforced, liquid brush grade. Covers approximately 50 sq ft per gallon.
Quikdry 104Q Asphalt Spray Primer
Quikdry 104Q Asphalt Spray Primer, 17 oz Aerosol Can, Liquefied Gas, Black, Petroleum Distillates, 550 g/L VOC
Our Price: $22.99

Used on edging and flashings, weathered composition roofing, concrete, and masonry surfaces prior to the use of solvent based asphalt coatings or adhesives. Covers 33 sq. ft. per can depending on porosity of surface.
COATING ROOF/FOUNDTION FBRD 5G
COATING ROOF/FOUNDTION FBRD 5G
Our Price: $42.99

COATING ROOF/FNDTN NON-FBRD 5G
COATING ROOF/FNDTN NON-FBRD 5G
Our Price: $44.99

Henry SS003 Fibered Roof Coating
Henry SS003 Fibered Roof Coating, 4.75 gal, Liquid, Black, Petroleum, 0.93 SG, 105 deg F Flash Point
Our Price: $45.99

A heavy bodied cutback asphalt coating, reinforced with synthetic fibers. The coating cures to a tough, weather resistant film. It has good adhesion to brick, concrete and steel, and because of its ability to retain its pliability, this coating resists damage which may result from expansion and contraction caused by weather, temperature variations, and normal building vibrations. Excellent material for surfacing most asphalt based or metal roofs. It is recommended for resurfacing weathered asphalt roof surfaces. Aged asphalt roof surfaces are rejuvenated as the coating penetrates the worn asphalt substrates helping to restore its original properties. NOT recommended for use with coal tar roofs. Approximately 50 sq. ft. per gallon. Coverage rate varies depending on texture and porosity of surface.
Henry Roofers Choice Fibered Roof Coating
Henry Roofers Choice Fibered Roof Coating, 4.75 gal, Liquid, Black, Petroleum, 0.93 SG, 105 deg F Flash Point
Our Price: $47.99

For gutters and flashings. Designed to penetrate and saturate flat built-up and composition roofs. Provides a tough, durable, weather-resistant film. Contains non-mineral fibers. Can be used at lower temperatures. Not formulated for use on any surface other than horizontal FLAT. In hot weather, this product may flow from sloped surfaces. Not recommended for use on wood or asphalt shingles. Covers 100 sq. ft per 1.5 gallons. Depending on texture and porosity of surface. Not for sale in California. Black.
Henry Roofers Choice Fibered Cold Process Roof Coating
Henry Roofers Choice Fibered Cold Process Roof Coating, 4.75 gal, Liquid, Black, Petroleum, 1.01 SG, 250 g/L VOC
Our Price: $47.99

Brush or squeegee grade, waterproof adhesive made from asphalt, solvents, and organic fibers. Designed for bonding layers of asphalt coated base sheets. Eliminates burn and fire hazards of hot asphalt. U.L. Class A in a variety of roof systems. Use in applications with 25# or heavier asphalt-coated fiberglass base sheets, conventional mineral surface cap sheet, polyester fabric and bonding gravel or granule surfacing. Coverage varies with smoothness and porosity of surface coated.
Henry Premier Fibered Asphalt Roof Coating
Coating Rf Fbr Asphalt Blk .9g - Case of 4
Our Price: $47.99

Use for resurfacing and rejuvenating old, worn roofs. Resaturates and extends roof life. Use on asphalt roofs, metal roofs and composition roofs. Heavy-bodied asphalt coating, reinforced with non-asbestos fibers. Cures to a tough, flexible, weather resistant film. Resists damage from minor expansion and contraction by weather, temperature, and normal building vibration. Covers 60-100 per sq. ft. per gallon depending on surface type. Not for sale in California.
   
 
1 2 3 4