|
|
|
|
|
|
TRUSS MENDING PLATE 2X4IN 22GA - Case of 120
|
|
|
Prong plates with straight prongs. Joins flat surfaces of 2 or more wood members. Not for structural use OR use in truss assembly, no load ratings assigned. G90 galvanizing finish. 22 ga.
|
|
|
|
|
|
|
|
|
|
TRUSS MENDING PLATE 5X2IN 20GA - Case of 100
|
|
|
The NP nail plates are an ideal economical solution for attaching wooden members together in a non-structural connection. Also may be used as a prescriptive top plate splice per the 2015 International Residential Code (IRC R602.3.2). They are pre-punched for 8d common nails.
|
|
|
|
|
|
|
|
|
|
TRUSS MENDING PLATE 5X3IN 20GA - Case of 100
|
|
|
The NP nail plates are an ideal economical solution for attaching wooden members together in a non-structural connection. Also may be used as a prescriptive top plate splice per the 2015 International Residential Code (IRC R602.3.2). They are pre-punched for 8d common nails.
|
|
|
|
|
|
|
|
|
|
TRUSS MENDING PLATE 3X6IN 22GA - Case of 80
|
|
|
Prong plates with straight prongs. Joins flat surfaces of 2 or more wood members. Not for structural use OR use in truss assembly, no load ratings assigned. G90 galvanizing finish. 22 ga.
|
|
|
|
|
|
|
|
|
|
POST MENDER 4X4IN 13GA STEEL - Case of 4
|
|
|
Take the work out of fence post installation and repair with the Speedpost, SFP30 and Speedmender, SMP. The speedpost is used to install 4 x 4 fence posts without digging post holes or pouring concrete. The speed mender plates act as reinforcement brackets for rotted or damaged 4 x 4 fence posts.
|
|
|
|
|
|
|
|
|
|
TRUSS MENDING PLATE 7X3IN 20GA - Case of 100
|
|
|
"Joins flat surfaces of 2 or more wood members. Not for structural use or use in truss assembly. G90 galvanizing finish. Use nails appropriate for intended use. Holes sized for 8d common or 8d x 1-1/2"" nails. 20 Gauge."
|
|
|
|
|
|
|
|
|
|
TRUSS MENDING PLATE 3X9IN 20GA - Case of 100
|
|
|
The NP nail plates are an ideal economical solution for attaching wooden members together in a non-structural connection. Also may be used as a prescriptive top plate splice per the 2015 International Residential Code (IRC R602.3.2). They are pre-punched for 8d common nails.
|
|
|
|
|
|
|
|
|
|
JOINER PLATE 1-1/2X4IN GLV STL - Case of 100
|
|
|
Prong plates with angled, hammer-in prongs. Joins flat surfaces of 2 or more wood members. G90 galvanizing finish. Not intended for structural use OR in truss assembly. No load ratings assigned. 18 ga.
|
|
|
|
|
|
|
|
|
|
Joiner Plate 3-3/16x8in Gv Stl - Case of 100
|
|
|
Prong plates with angled, hammer-in prongs. Joins flat surfaces of 2 or more wood members. G90 galvanizing finish. Not intended for structural use OR in truss assembly. No load ratings assigned. 18 ga.
|
|
|
|
