|
|
|
|
|
DeWALT 08293-PWR Mixing Nozzle, Plastic, For: AC100+ Gold 10 oz and 12 oz Cartridge System
|
|
DeWALT Mixing Nozzle, Plastic, Dimensions: 8 in L, Suitable for: AC100+ Gold 10 oz and 12 oz Cartridge System
|
|
|
|
|
|
|
|
Adhesives Technology T3438CK Mixing Nozzle Kit, For: 22 oz Ultra Bond Epoxy Systems
|
|
Nozzle kit for Ultrabond epoxy 22 oz system. Hi-Flow nozzles reduce waste while increasing flow. 15 in length snaps off to 10 in if required. 3/8 in Dia at tip. Built-in mixing nut allows for fast and easy attachment to cartridge.
|
|
|
|
|
|
|
|
Protective Coating PC-Concrete 72561 Epoxy Adhesive, White, Paste, 250 mL, Cartridge
|
|
PC-CONCRETE? anchoring and crack filling epoxy is the epoxy chosen to repair cracks in warehouse and factory floors. Dispense and apply using a standard size caulking gun. Cures hard enough to drive over within 3 hrs at standard temperature. Nothing stronger for your anchoring applications. PC-CONCRETE? is a two-component (1:1 ratio), 100% solids, high modulus and structural epoxy paste. PC-CONCRETE? is a solvent-free, no-odor, high strength, moisture insensitive epoxy system. The resin and hardener are uniformly dispensed from a 9 oz cartridge system and mixed through a mixing nozzle using a standard size caulking gun.
|
|
|
|
|
|
|
|
Red Head A7+ Series 07111 Anchoring Adhesive, Beige/Gray, 10 oz
|
|
Red Head A7+ is a high-strength, fast-cure adhesive that is designed to securely anchor threaded rod and rebar to cured concrete and masonry. A7+ is one of the most versatile anchoring solutions on the market, suitable for use in an extremely wide range of applications and environmental conditions.
|
|
|
|
|
|
|
|
Sika AnchorFix-1 Series 112729 Anchoring Adhesive, 10.1 oz, Cartridge
|
|
Sika? AnchorFix-1 adhesive anchoring system has been specially formulated as a high-performance, two-component adhesive anchor system for threaded and reinforcing bars in uncracked concrete.
|
|
|
|
|
|
|
|
Sika AnchorFix-2 Series 112718 Anchoring Adhesive, 10.1 oz, Cartridge
|
|
Sika? AnchorFix-2 adhesive anchoring system has been specially formulated as a high-performance, two-component adhesive anchor system for threaded and reinforcing bars in uncracked concrete.
|
|
|
|
|
|
|
|
DeWALT AC100+ GOLD 8478SDF-PWR Adhesive Epoxy, Paste, 9.5 fl-oz Cartridge, Quick-Shot Cartridge
|
|
The AC100+ Gold is a two-component vinylester adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The adhesive is designed for bonding threaded rod and reinforcing bar elements into drilled holes in concrete and masonry base materials. It can be considered for use in solid base materials as well as hollow base materials with screen tubes.
|
|
|
|
|
|
|
|
Quikrete FastSet 8620-30 Anchoring Epoxy, White, 8.6 oz Cartridge
|
|
Quikrete? FastSet? anchoring epoxy is a gray solvent-free, low-odor, high strength, moisture insensitive, non-sag epoxy. Quikrete? FastSet? anchoring epoxy is ideal for vertical or horizontal applications, including anchoring bolts, threaded rods and rebar dowels into concrete and masonry substrates. Ideal for fastening in grout filled block and unreinforced masonry and seismic anchoring and bracing.
|
|
|
|
|
|
|
|
Quikrete 8620-31 Anchoring Epoxy, White, 8.6 oz Cartridge
|
|
Quikrete? high strength anchoring epoxy is a two-component, high modulus, structural epoxy with an extended working time of approximately 20 mins at 77 deg F, Quikrete? high strength anchoring epoxy is ideal for vertical or horizontal applications, including anchoring bolts, threaded rods and rebar dowels into concrete and masonry substrates. Ideal for fastening in grout filled block and un-reinforced masonry and seismic anchoring and bracing.
|
|
|