|
|
|
|
|
Harvest Lane Honey WWER-101 Entrance Reducer, For: 10-Frame Langstroth Hives
|
|
Fits the 10 Frame Langstroth hives and seamlessly integrate with all Harvest Lane Honey bottom boards. With a small and medium gap, the reducer can be used to completely close off your hive for transport or as a protection from pesticide spraying. Reducers are also used to reduce the entrance of a hive during new package introduction or to prevent the hive from having to much cold air during winter. Standard usage is one reducer per hive.
|
|
|
|
|
|
|
|
FRAMES/FOUNDATION DEEP
|
|
Built from sturdy, food-grade plastic to make it resistant to wax moths and for easy acceptance in the hive. It features a text a textured cell pattern and 100% beeswax coating. Made in the USA of food grade plastic. Use with 9-1/8" Deep Brood Foundations with Groove Tops and Groove Bottoms and 9-1/2" Deep Brood Boxes.
|
|
|
|
|
|
|
|
Harvest Lane Honey WWFFM-102 Bee Hive Foundation, Plastic/Wood, For: 6-7/8 in Medium Honey Super Boxes
|
|
Harvest Lane Honey Bee Hive Foundation, Plastic/Wood, Suitable for: 6-7/8 in Medium Honey Super Boxes
|
|
|
|
|
|
|
|
Harvest Lane Honey QEP-102 Queen Excluder, Plastic, For: 10-Frame Langstroth Hives
|
|
Use with 10 frame Langstroth hives. Place the queen excluder between honey and brood chambers to prevent the queen from laying eggs in honey. The excluder will also allow you to find the queen easily on hive inspections. Do not add until the brood is established.
|
|
|
|
|
|
|
|
Harvest Lane Honey QEM-102 Queen Excluder, Metal, For: 10-Frame Langstroth Hives
|
|
Use with 10 frame Langstroth hives. Place the queen excluder between honey and brood chambers to prevent the queen from laying eggs in honey. The excluder will also allow you to find the queen easily on hive inspections. Do not add until the brood is established.
|
|
|
|
|
|
|
|
Harvest Lane Honey WWIC-101 Bee Hive Inner Cover, For: 10-Frame Langstroth Hives
|
|
Moisture-resistant and used as a protective cover over the hive to provide extra insulation. Ideal for use with standard 10 Frame Langstroth Beehives. Can also prevent the hive's top from sticking to the boxes to prolong the life of your equipment. When used with a bee escape or cone, it will help the beekeeper remove bees from the hive during honey harvest. Standard usage is one inner cover per hive.
|
|
|
|
|
|
|
|
Harvest Lane Honey WWBUM-102 Bee Hive Box, Medium, Ponderosa Pine, For: Langstroth Hive
|
|
Should be used as your Honey Supers or add to your hive until you are ready to extract honey. Based on the 6-7/8 in 10 Frame Langstroth and made from USA Ponderosa Pine with minimal knots, grade 2 or better, this box works with any Langstroth hive. Handle grips on four sides facilitate easy handling. Frame rest lip included. Recommend assembly shortly after delivery to ensure product quality. Dimension of 16-1/4 x 19-7/8 x 6-7/8 in. Assembly required and assembly instructions enclosed.
|
|
|
|
|
|
|
|
Harvest Lane Honey FRAMP-101 Frame Holder, Metal
|
|
Easily mounts to the side of beehive boxes for holding your frames as you inspect your hive.
|
|
|
|
|
|
|
|
Harvest Lane Honey WWBUL-101 Bee Hive Box, Ponderosa Pine, For: Langstroth Hive
|
|
Ideal for use as Brood chambers in your hive. Standard use is two brood chambers per hive. Based on the Langstroth 10-frame design with standard 9-1/2 in frames made from USA Ponderosa Pine with minimal knots, grade 2 or better, this box works with any Langstroth hive. Handle grips on four sides facilitate easy handling. Frame rest included. Recommend assembly shortly after delivery to ensure product quality. Dimension of 16-1/4 x 19-7/8 x 9-1/2 in. Assembly required and assembly instructions are enclosed.
|
|
|
|
|
|
|
|
Harvest Lane Honey WWSS-101 Bottom Board, For: 10-Frame Langstroth Hives
|
|
Designed to fit 10 Frame Langstroth hives and lasts for up to 20 years. Spacing on the bottom allows for strapping your hive for transport or wind protection. Standard usage is one Bottom Board per hive to be used as a base for your boxes.
|
|
|