|
Dremel 402 Rotary Tool Mandrel, Steel
|
|
Dremel 432 Series Sanding Band, 1/2 in Dia Drum, 1/8 in Dia Shank, 120 Grit, Coarse, Aluminum Oxide Abrasive
|
|
Dremel 408 Sanding Band, 1/2 in Dia Drum, 1/8 in Dia Shank, 60 Grit, Coarse, Aluminum Oxide Abrasive
|
|
|
|
|
|
|
|
|
Mandrels are used to mount different accessories to use with your Dremel? rotary tool. The 402 Dremel? Mandrel features slotted screw head and a 1/8 in (3.2 mm) shank. The 402 mandrel is typically used to hold accessories like cutting wheels and sanding discs. The flathead end of the wrench included in most rotary tool kits can be used to loosen or tighten the screw on the mandrel when doing accessory changes.
|
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).
|
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).
|
|
|
|
WHEEL POLISH FELT DREMEL 1/2IN
|
|
Dremel 560 Cutting Bit, 1/8 in Dia, 1-1/2 in L, 1/8 in Dia Shank, HSS
|
|
Dremel 8193 Grinding Stone, 5/8 in Dia, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive
|
|
|
|
|
|
|
|
|
Disc used to polish most metal and plastic surfaces. Using No.421 polishing compound with wheels produces a high luster. Use with No.401 mandrel. Do not run in excess of 30,000 RPM.
|
Get a drywall bit that makes fast, clean cuts. Our high-speed drywall cutting bit features a 1/8 in steel shank and a piloted tip for easy cutting around outlet and switch boxes. Ideal for cutting drywall for electrical boxes, air vents and other wall features.
|
Turn your Dremel? rotary tool into a simple-to-use rotary grinder. Our 8193 aluminum oxide grinding stone features a high-quality industrial abrasive that's ideal for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
|
|
|
|
Dremel 932 Grinding Stone, 3/8 in Dia, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive
|
|
Dremel 952 Grinding Stone, 3/8 in Dia, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive
|
|
Dremel 83322 Grinding Stone, 1/8 in Dia, 1/8 in Arbor/Shank, Silicon Carbide Abrasive
|
|
|
|
|
|
|
|
|
A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
|
Turn your Dremel? rotary tool into a simple-to-use rotary grinder. Our 952 aluminum oxide grinding stone features a high-quality industrial abrasive that's ideal for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
|
Silicone carbide grinding stone are designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals.
|
|
|
|
Dremel 85422 Grinding Stone, 25/32 in Dia, 1/8 in Arbor/Shank, Silicone Carbide Abrasive
|
|
Dremel 90930 Motor Brush, Carbon/Metal, Dim Gray
|
|
Dremel 401 Mandrel, HSS, For: Model 414, 422 and 429 Dremel Accessories
|
|
|
|
|
|
|
|
|
Use your Dremel? rotary tool as a powerful rotary grinder. Our silicon carbide grinding stone is designed to help you grind and etch stone, glass, ceramics, porcelain and non-ferrous metals.
|
One-pair of motor brushes. For use with Dremel? rotary tool model(s) 100, 200, 275, 285, 300, 395 and 595 (type 3, 4, 5 and 6). And Dremel? contour sander 6000 (type 1 and 2).
|
Dremel Mandrel, HSS, Dimensions: 3 in L, Suitable for: Model 414, 422 and 429 Dremel Accessories
|
|
|
|
Dremel 561 Cutting Bit, 1/8 in Dia, 1-1/2 in L, 1/8 in Dia Shank, HSS
|
|
Dremel EZ Lock Series 511E Abrasive Buff, 1 in Dia, Aluminum Oxide, Silicon Carbide
|
|
Dremel 431 Sanding Band, 1/4 in Dia Drum, 1/8 in Dia Shank, 60 Grit, Coarse, Aluminum Oxide Abrasive
|
|
|
|
|
|
|
|
|
Turn your Dremel? rotary tool into a simple-to-use rotary saw. Our 561 high-speed multi-purpose cutter gives you the power to easily cut wood, plastic, fiberglass, drywall, laminate and aluminum and vinyl siding. 1/8 in steel shank.
|
The 511E EZ lock finishing abrasive buffs include two versatile sanding buffs in one convenient package. Great for detail cleaning, light sanding, furniture refinishing or paint removal on delicate materials. The buffs can be used on metal, glass, hard or softwood, steel, aluminum or plastics. The set includes a very fine 15/16 in (23.8 mm) 180 grit buff and an extra fine 15/16 in (23.8 mm) 280 grit buff. The accessories are compatible with the patented EZ lock system making accessory changes quick and easy. For use with the EZ402 EZ lock mandrel or standard 402 mandrel.
|
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).
|
|
|
|
Dremel EZ Lock Series 512E Abrasive Buff, 1 in Dia, 7/64 in Thick, Steel
|
|
Dremel 113 Engraving Cutter, 1/16 in Dia, 1-1/2 in L, 1/8 in Dia Shank, HSS
|
|
Dremel 422 Polishing Cone, 10 mm Dia, 1 in L, 3.2 mm Dia Shank, Felt Fabric
|
|
|
|
|
|
|
|
|
Great for cleaning and light sanding, the 512E 320 grit abrasive buff is ideal for use on metal, glass, wood, aluminum and plastics and can easily remove tarnish from brass. The set includes two extra fine (320 grit) finishing abrasive buffs. The accessories are compatible with the patented EZ Lock system making accessory changes 6X faster than using a standard mandrel. The abrasive buffs are designed for use with either the EZ402 EZ Lock mandrel or standard 402 mandrel.
|
Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 rpm.
|
The 3/8 in felt polishing point is made to take a semi-rough finish and polish it to a smooth finish. Ideal for general polishing of most ferrous metals, stones, glass and ceramics. Can be used with 421 polishing compound.
|
|
|
|
Dremel EZ Lock Series 423E Polishing Wheel, 1 in Dia, 7/64 in Thick
|
|
Dremel 429 Polishing Wheel, 1 in Dia
|
|
Forney 60218 Series Sanding Drum Kit, Specifications: Fine Grit Grade, 30,000 rpm Speed Rating, Red
|
|
|
|
|
|
|
|
|
Turn your Dremel? rotary tool into a powerful polisher with the 423E EZ Lock? cloth polishing wheel. Great for car detailing, metal and hardware restoration or simply polishing silverware to a high luster. The polishing accessory is made to take a semi-rough finish and polish it to a smooth finish. Can be used with the standard 402 mandrel or to make accessory changes quicker and easier the 423E can also be used with the EZ402 mandrel. Try the cloth polishing wheel with the 421 polishing compound for a deeper clean of the material and produces a high luster.
|
Turn your Dremel? rotary tool into a powerful polisher with the 429 felt polishing wheel. Good for polishing metals, plastics, stones, ceramics and glass. The polishing accessory is made to take a semi-rough finish and polish it to a smooth finish. The cone works excellent with the 421 polishing compound which allows for a deeper clean of the material and produces a high luster.
|
Can be used to replace or add sanding sleeves to Forney? Industries item# 60217, four piece 1/2 x 1/2 in red grit sanding drum kit with 1/8 in shaft.
|
|
|
|
Forney 60219 Series Sanding Drum Kit, Specifications: Medium Grit Grade, 30,000 rpm Speed Rating, Red
|
|
Forney 60220 Series Sanding Drum Kit, Specifications: Coarse Grit Grade, 30,000 rpm Speed Rating, Red
|
|
Bosch 407-03 Sanding Band, 1/8 in Dia Shank, 60 Grit, Coarse, Aluminum Oxide Abrasive
|
|
|
|
|
|
|
|
|
Can be used to replace or add sanding sleeves to Forney? Industries item# 60217, four piece 1/2 x 1/2 in red grit sanding drum kit with 1/8 in shaft.
|
Can be used to replace or add sanding sleeves to Forney? Industries item# 60217, four piece 1/2 x 1/2 in red grit sanding drum kit with 1/8 in shaft.
|
Sanding band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 rpm.
|
|
|
|
Dremel 453 Grinding Stone, 5/32 in Dia, 1/8 in Arbor/Shank, 120 Grit, Steel Abrasive
|
|
Dremel 454 Grinding Stone, 3/16 in Dia, 1/8 in Arbor/Shank, 80 Grit, Aluminum Oxide Abrasive
|
|
Dremel 455 Grinding Stone, 7/32 in Dia, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive
|
|
|
|
|
|
|
|
|
Dremel? accessories are designed to be just what you need to complete projects. This grinding stone is for used to sharpen chain saw blades. For use with the Dremel? chain saw sharpening attachment.
|
Dremel? chain saw sharpening stone is for use with Dremel? chain saw sharpener attachment. This replacement stone provides an excellent cutting edge on the chain saw's cutting tooth. Having a sharp chain saw blade improves chain saw performance and safety.
|
Dremel Grinding Stone, Aluminum Oxide Abrasive, Arbor/Shank Size: 1/8 in, 35,000 rpm, Green, 7/32 in Dia, Suitable for: 3/8 in Pitch Chain Saw
|
|
|
|
Dremel 540 Cut-Off Wheel, 1-1/4 in Dia, 1/16 in Thick
|
|
Dremel 447 Brush Set, Carbon Steel Bristle
|
|
Dremel 953 Grinding Stone, 1/4 in Dia, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive
|
|
|
|
|
|
|
|
|
This wheel for cutting metal with limited use on wood and plastic. Cut-off wheels make it easy-to-cut or slot bolts, screws, sheet metal, thin wood and plastic. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.
|
Dremel Brush Set, Carbon Steel Bristle, 15,000 rpm, 1-3/4 in L, Applicable Materials: Brass, Copper and Soft Ferrous, Includes: (1) 428 3/4 in Brush, (1) 442 1/2 in Bit Diameter and 1/8 in Shank Diameter Brush
|
Dremel? 953 aluminum oxide grinding stone. A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
|
|
|
