|
SCREW RSS INDV 5/16X3-1/8IN - Case of 50
|
|
SCREW RSS INDV 3/8X8IN - Case of 25
|
|
SCREW RSS INDV 3/8X12IN - Case of 20
|
|
|
|
|
|
|
|
|
GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates.
|
GRK's RSS? rugged structural screw is a structural fastener designed for ease of installation and the strongest of connections. RSS fasteners drive into most woods without the need for pre-drilling. The specially engineered design results in a low-effort installation, especially compared to conventional lag screws.
|
GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates.
|
|
|
|
SCREW RSS INDV 3/8X10IN - Case of 25
|
|
SCRW WD S-TAP STAR-DR 5/16X4IN - Case of 50
|
|
SCREW RSS INDV 5/16X6IN - Case of 40
|
|
|
|
Suggested Retail: $119.99
|
|
|
|
|
|
|
GRK's RSS? rugged structural screw is a structural fastener designed for ease of installation and the strongest of connections. RSS fasteners drive into most woods without the need for pre-drilling. The specially engineered design results in a low-effort installation, especially compared to conventional lag screws.
|
GRK's RSS??? rugged structural screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws which are 3-1/8 in and longer have a six threaded CEE thread that enlarges the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increasing the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates.
|
GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates.
|
|
|
|
SCREW RSS INDV 5/16X5-1/8IN - Case of 50
|
|
Camo 0360209 Structural Screw, 1/4 in Thread, 4 in L, Flat Head, Star Drive, Sharp Point, PROTECH Ultra 4-Coated, 250 PK
|
|
GRK Fasteners RSS 10225 Structural Screw, 5/16 in Thread, 4 in L, Washer Head, Star Drive, Steel, 400 BX
|
Suggested Retail: $159.99
|
|
|
Suggested Retail: $199.99
|
|
|
Suggested Retail: $219.99
|
|
|
|
|
|
|
GRK's RSS? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS? screw in pre-drilled hardware like hinges and connector plates.
|
Camo? exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong and is backed by a Camo? warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and more.
|
GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates.
|
|
|
|
GRK Fasteners RSS 10217 Structural Screw, 5/16 in Thread, 2-1/2 in L, Washer Head, Star Drive, Steel, 600 BX
|
|
GRK Fasteners RSS 10231 Structural Screw, 5/16 in Thread, 5-1/8 in L, Washer Head, Star Drive, Steel, 300 BX
|
|
GRK Fasteners RSS 10221 Structural Screw, 5/16 in Thread, 3-1/8 in L, Washer Head, Star Drive, Steel
|
Suggested Retail: $269.99
|
|
|
Suggested Retail: $299.99
|
|
|
Suggested Retail: $299.99
|
|
|
|
|
|
|
GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates.
|
GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates.
|
GRK's RSS? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS? screw in pre-drilled hardware like hinges and connector plates.
|
|
|
|
GRK Fasteners RSS 10223 Structural Screw, 5/16 in Thread, 3-1/2 in L, Washer Head, Star Drive, Steel, 500 BX
|
|
Camo 0360249 Structural Screw, 1/4 in Thread, 6 in L, Flat Head, Star Drive, Sharp Point, PROTECH Ultra 4 Coated, 250
|
|
Camo 0360269 Structural Screw, 1/4 in Thread, 8 in L, Flat Head, Star Drive, Sharp Point, PROTECH Ultra 4 Coated, 250
|
Suggested Retail: $299.99
|
|
|
Suggested Retail: $299.99
|
|
|
Suggested Retail: $299.99
|
|
|
|
|
|
|
GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates.
|
Camo exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong, and is backed by a Camo warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and more.
|
Camo exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong, and is backed by a Camo warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and more.
|
|
|
|
GRK Fasteners RSS 10137 Structural Screw, #10 Thread, 3-1/8 in L, Washer Head, Star Drive, Steel, 800 BX
|
|
GRK Fasteners RSS 10235 Structural Screw, 5/16 in Thread, 6 in L, Washer Head, Star Drive, Steel, 300 BX
|
|
GRK Fasteners RSS 10281 Structural Screw, 3/8 in Thread, 6 in L, Washer Head, Star Drive, Steel, 300 BX
|
Suggested Retail: $329.99
|
|
|
Suggested Retail: $379.99
|
|
|
Suggested Retail: $549.99
|
|
|
|
|
|
|
GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates.
|
GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates.
|
GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates.
|
|
|
|
GRK Fasteners RSS 10287 Structural Screw, 3/8 in Thread, 8 in L, Washer Head, Star Drive, Steel, 300 BX
|
|
|
|
|
Suggested Retail: $879.99
|
|
|
|
|
GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates.
|
|
|
