SCREWS - PKG - STRUCTURE -COAT

Home > FASTENERS > NUTS, BOLTS, SCREWS > CONSTRUCTION SCREWS - PACKAGED > SCREWS - PKG - STRUCTURE -COAT

Sort By:

1 2 3 ... 5

Simpson Strong-Tie Outdoor Accents SD10112DBBR50 Connector Screw, #10 Thread, 1-1/2 in L, Serrated Thread, Hex Head

Simpson Strong-Tie Strong-Drive SDS SDS25112-R25 Connector Screw, 1-1/2 in L, Serrated Thread, Hex Head, Hex Drive

Camo 0360170 Structural Screw, 1/4 in Thread, 3 in L, Flat Head, Star Drive, Sharp Point, PROTECH Ultra 4 Coated, 10

Suggested Retail: $9.99

Suggested Retail: $9.99

Suggested Retail: $10.99

The Outdoor Accents? connector screw reduces installation time by driving easily without pre-drilling. Designed for installation with the Outdoor Accents? connectors, such as the APA21 90 deg angle, APLH light joist hangers and APGT gazebo ties, the screw's black finish accents any outdoor living project. The sharp-point of the screw enables fast starts. The Simpson Strong-Tie? Strong-Drive? SDS heavy-duty connector screw is a 0.25 in Dia high-strength structural wood screw ideal for various connector installations as well as wood-to-wood and engineered-wood applications. It installs with no pre-drilling and has been extensively tested in various applications. The SDS is improved with an easy-driving Type-17 point and a corrosion-resistant double-barrier coating. The SDS Strong-Drive? 1/4 in wood screw line has expanded to include stainless steel SDS screws in 1-1/2 to 3-1/2 in lengths, suitable for fastening Simpson Strong-Tie? stainless steel products. Offering the same easy-driving, split-reducing installation of the standard SDS screw, these screws are made from Type 316 stainless steel. The stainless steel SDS screws are appropriate for higher-exposure environments where maximum corrosion resistance is required. Camo exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong, and is backed by a Camo warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and more.

Camo 0366180 Structural Screw, 5/16 in Thread, 2-7/8 in L, Flat Head, Star Drive, Sharp Point, 10/PK

Camo 0360200 Structural Screw, 1/4 in Thread, 4 in L, Flat Head, Star Drive, Sharp Point, PROTECH Ultra 4-Coated, 10 PK

Grabber Construction GTIE4RP Structural Framing Screw, #14 Thread, 4 in L, Coarse Thread, Flat Head, Torx Drive, 10 PK

Suggested Retail: $12.99

Suggested Retail: $13.99

Suggested Retail: $14.99

Camo exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong, and is backed by a Camo warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and more. Camo? exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong and is backed by a Camo? warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and more. Grabber Tie-Master??? Multi-purpose wood fastener for general wood construction such as ledger boards, laminated beams, under-deck connections, trusses and dimensional lumber, decks, docks and boardwalks. Featuring flat #40 Star head countersinking design for flush finish and DrawTite??? shank pulling members tight together. Type 17 cutter point eliminates pre-drilling in. Mechanical galvanized exterior coating for corrosion resistance.

Camo 0366190 Structural Screw, 5/16 in Thread, 3-1/2 in L, Flat Head, Star Drive, Sharp Point, 10/PK

Simpson Strong-Tie Strong-Drive SDWS SDWS22300DB-R12 Timber Screw, 3 in L, Washer Head, 6-Lobe Drive, Steel

Simpson Strong-Tie Outdoor Accents SDWS SDWS22312DBBRC12 Structural Screw, 3-1/2 in L, Low-Profile Head, 6-Lobe Drive

Suggested Retail: $14.99

Camo exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong, and is backed by a Camo warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and more. The Strong-Drive? SDWS timber screw is designed to provide an easy to install, high-strength alternative to through-bolting and traditional lag screws. This screw is ideal for the contractor and do-it-yourselfer alike. It is code listed in IAPMO UES ER-192 and meets 2018 and 2021 IRC? and IBC? code requirements for most common wood framing applications. The Outdoor Accents? structural wood screw reduces installation time by driving easily without pre-drilling. When combined with the patented, load-rated Outdoor Accents? hex head washer, the solution delivers the decorative appearance of a bolt connection but with a much easier installation. The structural wood screw is now available in three sizes 2 in, 3-1/2 in and 5-1/2 in and can be used with either the Mission Collection? or Avant Collection?, as well as separately to add flair to any outdoor project. The 3-1/2 in and 5-1/2 in screws are ideal for structural applications. They feature a bold thread design that enables excellent holding to attach ledgers and other secure connections. The 2 in screw is ideal for use with 2X lumber and for adding style to any DIY project.

Simpson Strong-Tie Strong-Drive SDS SDS25212-R25 Connector Screw, 2-1/2 in L, Serrated Thread, Hex Head, Hex Drive

Grabber Construction GTIE412RP Structural Framing Screw, #14 Thread, 4-1/2 in L, Coarse Thread, Torx Drive, 10/PK

Simpson Strong-Tie Strong-Drive SD SD8X1.25-R Screw, #8 Thread, 1-1/4 in L, Serrated Thread, Wafer Head, Steel

Suggested Retail: $14.99

Suggested Retail: $15.99

The Simpson Strong-Tie? Strong-Drive? SDS heavy-duty connector screw is a 0.25 in Dia high-strength structural wood screw ideal for various connector installations as well as wood-to-wood and engineered-wood applications. It installs with no pre-drilling and has been extensively tested in various applications. The SDS is improved with an easy-driving Type-17 point and a corrosion-resistant double-barrier coating. The SDS Strong-Drive? 1/4 in wood screw line has expanded to include stainless steel SDS screws in 1-1/2 to 3-1/2 in lengths, suitable for fastening Simpson Strong-Tie? stainless steel products. Offering the same easy-driving, split-reducing installation of the standard SDS screw, these screws are made from Type 316 stainless steel. The stainless steel SDS screws are appropriate for higher-exposure environments where maximum corrosion resistance is required. Grabber Tie-Master? Multi-purpose wood fastener for general wood construction such as ledger boards, laminated beams, under-deck connections, trusses and dimensional lumber, decks, docks and boardwalks. Featuring flat #40 Star head countersinking design for flush finish and DrawTite? shank pulling members tight together. Type 17 cutter point eliminates pre-drilling in. Mechanical galvanized exterior coating for corrosion resistance. Interior wood screws provide fastening solutions that ensure a safer, stronger indoor living environment. The versatile wafer head screw is designed for general wood-to-wood fastening where its pull-through resistance is an advantage. This versatile screw features a sharp-point for easy installation and is ideal for everything from cabinetry to framing.

Simpson Strong-Tie Strong-Drive SDS SDS25412-R10 Connector Screw, 4-1/2 in L, Serrated Thread, Hex Head, Hex Drive

Camo 0366200 Structural Screw, 5/16 in Thread, 4 in L, Flat Head, Star Drive, Sharp Point, PROTECH Ultra 4 Coated, 10

Simpson Strong-Tie Strong-Drive SDWS SDWS16212Q-R50 SDWS Framing Screw, 2-1/2 in L, Serrated Thread, Low-Profile Head

Suggested Retail: $15.99

Suggested Retail: $16.99

The Simpson Strong-Tie? Strong-Drive? SDS heavy-duty connector screw is a 0.25 in Dia high-strength structural wood screw ideal for various connector installations as well as wood-to-wood and engineered-wood applications. It installs with no pre-drilling and has been extensively tested in various applications. The SDS is improved with an easy-driving Type-17 point and a corrosion-resistant double-barrier coating. The SDS Strong-Drive? 1/4 in wood screw line has expanded to include stainless steel SDS screws in 1-1/2 to 3-1/2 in lengths, suitable for fastening Simpson Strong-Tie? stainless steel products. Offering the same easy-driving, split-reducing installation of the standard SDS screw, these screws are made from Type 316 stainless steel. The stainless steel SDS screws are appropriate for higher-exposure environments where maximum corrosion resistance is required. Camo exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong, and is backed by a Camo warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and more. The SDWS Framing screw is designed and load-rated for replacing 16d, 10d and 8d nails in framing applications. The SDWS framing screw is excellent to nails in holding power and pull-out resistance. It is code listed in IAPMO UES ER-192 and meets 2018 and 2021 IRC? and IBC? code requirements for most common wood framing applications. The screw has a SawTooth? point that makes for fast installations with reduced torque without pre-drilling and its specially designed head countersinks easily to provide a clean, flush finish. The T25 bit holds the six-lobe recess tightly for more secure drive control.

Grabber Construction GTIE5RP Structural Framing Screw, #14 Thread, 5 in L, Coarse Thread, Flat Head, Torx Drive, 10/PK

Grabber Construction GTIE6RP Structural Framing Screw, #14 Thread, 6 in L, Coarse Thread, Flat Head, Torx Drive, 10 PK

Simpson Strong-Tie Strong-Drive SDWS SDWS16312QR50 Framing Screw, 3-1/2 in L, Serrated Thread, Low-Profile Head, 50

Suggested Retail: $17.99

Grabber Tie-Master? Multi-purpose wood fastener for general wood construction such as ledger boards, laminated beams, under-deck connections, trusses and dimensional lumber, decks, docks and boardwalks. Featuring flat #40 Star head countersinking design for flush finish and DrawTite? shank pulling members tight together. Type 17 cutter point eliminates pre-drilling in. Mechanical galvanized exterior coating for corrosion resistance. Grabber Tie-Master??? Multi-purpose wood fastener for general wood construction such as ledger boards, laminated beams, under-deck connections, trusses and dimensional lumber, decks, docks and boardwalks. Featuring flat #40 Star head countersinking design for flush finish and DrawTite??? shank pulling members tight together. Type 17 cutter point eliminates pre-drilling in. Mechanical galvanized exterior coating for corrosion resistance. The SDWS Framing screw is designed and load-rated for replacing 16d, 10d and 8d nails in framing applications. The SDWS Framing screw is great to nails in holding power and pull-out resistance. It is code listed in IAPMO UES ER-192 and meets 2018 and 2021 IRC? and IBC? code requirements for most common wood framing applications. The screw has a SawTooth? point that makes for fast installations with reduced torque without predrilling and its specially designed head countersinks easily to provide a clean, flush finish. The T25 bit holds the 6-lobe recess tightly for more secure drive control.

Simpson Strong-Tie Strong-Drive SD SD9112R100 Connector Screw, #9 Thread, 1-1/2 in L, Hex Head, Serrated Thread

Simpson Strong-Tie Strong-Drive SDS SDS25300-R25 Connector Screw, 3 in L, Serrated Thread, Hex Head, Hex Drive

Simpson Strong-Tie Strong-Drive SDWH SDWH19400DB-R12 Timber Screw, 4 in L, Large Hex Washer Head, 5/16 in Drive

Suggested Retail: $17.99

Suggested Retail: $18.99

The Strong-Drive? SD connector screw is specifically designed to replace nails in certain Simpson Strong-Tie? connectors and is the only screw approved for that application. The load-rated SD screw has been tested and approved for use in many popular Simpson Strong-Tie? products. In certain applications screws are easier and more convenient to install than nails and the single-fastener load values achieved by the SD screw exceed those of typical 10d common or 16d common nails. In addition, the galvanized coating makes the SD screw ideal for interior and most exterior conditions. The Simpson Strong-Tie? Strong-Drive? SDS heavy-duty connector screw is a 0.25 in Dia high-strength structural wood screw ideal for various connector installations as well as wood-to-wood and engineered-wood applications. It installs with no pre-drilling and has been extensively tested in various applications. The SDS is improved with an easy-driving Type-17 point and a corrosion-resistant double-barrier coating. The SDS Strong-Drive? 1/4 in wood screw line has expanded to include stainless steel SDS screws in 1-1/2 to 3-1/2 in lengths, suitable for fastening Simpson Strong-Tie? stainless steel products. Offering the same easy-driving, split-reducing installation of the standard SDS screw, these screws are made from Type 316 stainless steel. The stainless steel SDS screws are appropriate for higher-exposure environments where maximum corrosion resistance is required. Strong-Drive? SDWH Timber-Hex screws are designed for structural and general-purpose fastening applications where a hex head drive is preferred. These screws are ideal for the contractor and do-it-yourselfer alike. The SDWH Timber-Hex is code listed in IAPMO UES ER-192 and meets 2018 and 2021 IRC? and IBC? code requirements for most common wood framing applications.

Simpson Strong-Tie Strong-Drive SDWS SDWS16400QR50 Framing Screw, 4 in L, Serrated Thread, Low-Profile Head, 50

Simpson Strong-Tie Strong-Drive SDWS SDWS22400DB-R12 Timber Screw, 4 in L, Washer Head, 6-Lobe Drive, Steel

GRK Fasteners RSS 12133 Structural Screw, #10 Thread, 2-1/2 in L, W-Cut Thread, Washer Head, Star Drive, Zip-Tip Point

Suggested Retail: $18.99

Suggested Retail: $19.99

The SDWS Framing screw is designed and load-rated for replacing 16d, 10d and 8d nails in framing applications. The SDWS Framing screw is great to nails in holding power and pull-out resistance. It is code listed in IAPMO UES ER-192 and meets 2018 and 2021 IRC? and IBC? code requirements for most common wood framing applications. The screw has a SawTooth? point that makes for fast installations with reduced torque without predrilling and its specially designed head countersinks easily to provide a clean, flush finish. The T25 bit holds the 6-lobe recess tightly for more secure drive control. The Strong-Drive? SDWS timber screw is designed to provide an easy to install, high-strength alternative to through-bolting and traditional lag screws. This screw is ideal for the contractor and do-it-yourselfer alike. It is code listed in IAPMO UES ER-192 and meets 2018 and 2021 IRC? and IBC? code requirements for most common wood framing applications. GRK's RSS? rugged structural screw is a structural fastener designed for ease of installation and the strongest of connections. RSS fasteners drive into most woods without the need for pre-drilling. The specially engineered design results in a low-effort installation, especially compared to conventional lag screws.

Camo 0366220 Structural Screw, 5/16 in Thread, 5 in L, Flat Head, Star Drive, Sharp Point, PROTECH Ultra 4 Coated, 10

Camo 0360240 Structural Screw, 1/4 in Thread, 6 in L, Flat Head, Star Drive, Sharp Point, PROTECH Ultra 4-Coated, 10 PK

Simpson Strong-Tie Strong-Drive SD SD10112R100 Connector Screw, #10 Thread, 1-1/2 in L, Serrated Thread, Hex Head

Suggested Retail: $19.99

Camo exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong, and is backed by a Camo warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and more. Camo? exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong and is backed by a Camo? warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and more. The Strong-Drive? SD connector screw is specifically designed to replace nails in certain Simpson Strong-Tie? connectors and is the only screw approved for that application. The load-rated SD screw has been tested and approved for use in many popular Simpson Strong-Tie? products. In certain applications screws are easier and more convenient to install than nails and the single-fastener load values achieved by the SD screw exceed those of typical 10d common or 16d common nails. In addition, the galvanized coating makes the SD screw ideal for interior and most exterior conditions.

Simpson Strong-Tie Strong-Drive SDS SDS25600-R10 Connector Screw, 6 in L, Serrated Thread, Hex Head, Hex Drive

Camo 0355150 Framing Screw, 0.16 in Thread, 2-1/2 in L, Flat Head, Star Drive, Slash Point, PROTECH Ultra 4 Coated, 50

Simpson Strong-Tie Strong-Drive SDWS SDWS22500DB-R12 Timber Screw, 5 in L, Washer Head, 6-Lobe Drive, Steel

Suggested Retail: $19.99

Suggested Retail: $21.99

The Simpson Strong-Tie? Strong-Drive? SDS heavy-duty connector screw is a 0.25 in Dia high-strength structural wood screw ideal for various connector installations as well as wood-to-wood and engineered-wood applications. It installs with no pre-drilling and has been extensively tested in various applications. The SDS is improved with an easy-driving Type-17 point and a corrosion-resistant double-barrier coating. The SDS Strong-Drive? 1/4 in wood screw line has expanded to include stainless steel SDS screws in 1-1/2 to 3-1/2 in lengths, suitable for fastening Simpson Strong-Tie? stainless steel products. Offering the same easy-driving, split-reducing installation of the standard SDS screw, these screws are made from Type 316 stainless steel. The stainless steel SDS screws are appropriate for higher-exposure environments where maximum corrosion resistance is required. Camo exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong, and is backed by a Camo warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and more. The Strong-Drive? SDWS timber screw is designed to provide an easy to install, high-strength alternative to through-bolting and traditional lag screws. This screw is ideal for the contractor and do-it-yourselfer alike. It is code listed in IAPMO UES ER-192 and meets 2018 and 2021 IRC? and IBC? code requirements for most common wood framing applications.


	1 2 3 ... 5