CHAIN / ACCESSORIES

Home > FASTENERS > CHAIN, CABLE, ROPE > CHAIN / ACCESSORIES

Choose a sub category:

CHAIN - PROOF COIL	CHAIN - HIGH TEST
CHAIN - TRANSPORT / BINDER	CHAIN - BINDER ASSEMBLED
CHAIN - STRAIGHT LINK	CHAIN - TWIST LINK
CHAIN - JACK	CHAIN - TWIN LOOP
CHAIN - SASH	CHAIN - DECORATIVE
CHAIN - PLASTIC	CHAIN - SPECIALTY
GRAB HOOKS	SLIP HOOKS
CHAIN - COLD SHUTS	CHAIN - LAP LINKS
CHAIN - QUICK LINKS	CHAIN - SNAP LINKS
CHAIN - SWIVELS	CHAIN - CLEVIS LINKS
SPECIALTY FARM	HITCH PINS
ANCHOR SHACKLES	CLEVISES & PINS
SNAPS	WELDED RINGS
CHAIN HOISTS	LOAD BINDERS
POWER HOISTS	ROLLER CHAINS & PARTS

Sort By:

1 2 3 ... 29

Koch 4020413 Lynch Pin, 1/4 in, 1-1/4 in L, Zinc-Plated

Koch 4020713 Lynch Pin, 7/16 in, 1-1/4 in L, Zinc-Plated

Campbell T7665032 Welded Ring, 200 lb Working Load, 1-1/4 in ID Dia Ring, #7 Chain, Steel, Nickel-Plated

Suggested Retail: $0.99

Suggested Retail: $1.19

Suggested Retail: $1.49

Lynch pins from Koch industries are yellow zinc-plated. They feature a solid pin with an attached self-locking ring that snaps firmly down. Lynch pins from Koch industries are yellow zinc-plated. They feature a solid pin with an attached self-locking ring that snaps firmly down. Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1-1/4 in ID, Chain Size: #7, Steel, Nickel-Plated

National Hardware 3152BC Series N223-065 Lap Link, 1/8 in Trade, 120 lb Working Load, Steel, Zinc

National Hardware 3152BC Series N223-073 Lap Link, 3/16 in Trade, 225 lb Working Load, Steel, Zinc

Koch 4020311 Standard Lynch Pin, 3/16 in Dia Pin, 1 in OAL, Zinc

Suggested Retail: $1.49

National Hardware 3152BC Lap Link, Working Load Limit: 120 lb, Trade Size: 1/8 in, Steel, Zinc National Hardware 3152BC Lap Link, Working Load Limit: 225 lb, Trade Size: 3/16 in, Steel, Zinc Koch Standard Lynch Pin, Pin Diameter: 3/16 in, 1 in OAL, Zinc, Yellow

Baron 2450-3/16 Spring Snap, 80 lb Working Load, Malleable Iron, Zinc

Campbell T7661152 Welded Ring, 200 lb Working Load, 2 in ID Dia Ring, #3 Chain, Steel, Nickel-Plated

Campbell T7665042 Welded Ring, 200 lb Working Load, 1-1/2 in ID Dia Ring, #3 Chain, Steel, Nickel-Plated

Suggested Retail: $1.69

Do not exceed the working load limit. Do not use for overhead lifting, to support human weight, for playground or athletic equipment or as safety device. Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 2 in ID, Chain Size: #3, Steel, Nickel-Plated Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1-1/2 in ID, Chain Size: #3, Steel, Nickel-Plated

Campbell T7660841 Welded Ring, 200 lb Working Load, 1-1/4 in ID Dia Ring, #4 Chain, Steel, Zinc

National Hardware 3153BC Series N240-333 Cold Shut, 3/16 in Trade, 750 lb Working Load, Steel, Zinc

Koch 4022213 Wire Hair Pin Clip, 3/32 in Dia Pin, 1-5/8 in OAL, Zinc

Suggested Retail: $1.69

Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1-1/4 in ID, Chain Size: #4, Steel, Zinc Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel. Koch Wire Hair Pin Clip, Pin Diameter: 3/32 in, 1-5/8 in OAL, Zinc, Yellow

Koch 4021513 PTO Locking Pin, 2-1/4 in L, Zinc-Plated

Campbell T4900424 Cold Shut, 1/4 in Trade, 800 lb Working Load, Mild Steel, Zinc

Fehr 1/4IN Anchor Shackle, 1/4 in Trade, 0.33 ton Working Load, Commercial Grade, Steel, Galvanized

Suggested Retail: $1.79

Suggested Retail: $1.99

PTO locking pins from Koch Industries are yellow zinc-plated. They are available in either round or square wire retainers. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting.

Campbell T4900324 Cold Shut, 3/16 in Trade, 400 lb Working Load, Mild Steel

National Hardware 3152BC Series N223-081 Lap Link, 1/4 in Trade, 500 lb Working Load, Steel, Zinc

Baron 422-1-3/4 Bit Snap, 9/32 in Snap Opening, 1-3/4 in L Dimensions, Steel, Zinc

Suggested Retail: $1.99

Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. National Hardware 3152BC Lap Link, Working Load Limit: 500 lb, Trade Size: 1/4 in, Steel, Zinc Baron Bit Snap, Working Load Limit: 115 lb, Snap Opening Size: 9/32 in, Steel, Zinc, Dimensions: 1-3/4 in L

Baron 2-2-1/2 Round Weld Ring, 300 lb Working Load, 2-1/2 in Dia Ring, #2 Chain, Steel, Zinc

Baron 383-1/4 Cold Shut, 1/4 in Trade, 750 lb Working Load, Steel, Zinc

Koch 4021563 Square PTO Locking Pin, 5/16 in Dia Pin, 2-1/4 in OAL, Yellow Zinc

Suggested Retail: $1.99

Baron Round Weld Ring, Working Load Limit: 300 lb, Ring Diameter: 2-1/2 in, Chain Size: #2, Steel, Zinc Baron Cold Shut, Working Load Limit: 750 lb, Trade Size: 1/4 in, Inside Length: 1-3/16 in, Steel, Zinc, Silver PTO locking pins from Koch Industries are yellow zinc-plated. They are available in either round or square wire retainers.

Koch 4020411 Standard Lynch Pin, 1/4 in Dia Pin, 1-1/4 in OAL, Zinc

Baron 2450-1/4 Spring Hook Snap Link, 5/16 in Snap Opening, 2-3/8 in L Dimensions, Steel, Zinc

Baron 383-5/16 Large Cold Shut, 1250 lb Working Load, 5/16 in Dia Wire, Steel, Zinc-Plated

Suggested Retail: $1.99

Suggested Retail: $2.19

Koch Standard Lynch Pin, Pin Diameter: 1/4 in, 1-1/4 in OAL, Zinc, Yellow Do not exceed the working load limit. Do not use for overhead lifting, to support human weight, for playground or athletic equipment or as safety device. Baron Large Cold Shut, Working Load Limit: 1250 lb, Inside Length: 1-3/8 in, Wire Diameter: 5/16 in, Steel, Zinc-Plated, Silver

Koch 4020511 Standard Lynch Pin, 5/16 in Dia Pin, 1-1/4 in OAL, Zinc

Koch 4022313 Wire Hair Pin Clip, 1-15/16 in L, Zinc

Baron 1407 Chain Snap, 60 lb Working Load, Steel, Zinc

Suggested Retail: $2.19

Suggested Retail: $2.39

Koch Standard Lynch Pin, Pin Diameter: 5/16 in, 1-1/4 in OAL, Zinc, Yellow Koch Wire Hair Pin Clip, 1/8 in, 1-15/16 in L, Zinc, Yellow Baron Chain Snap, Working Load Limit: 60 lb, Snap Opening Size: 9/32 in, Steel, Zinc, Dimensions: 3-3/8 in L

Koch 081163/MC645G Anchor Shackle, Screw Pin, 400 lb Working Load, Steel

Campbell T4900524 Cold Shut, 5/16 in Trade, 1300 lb Working Load, Mild Steel, Zinc

Baron 424-2-1/2 Bit Snap, 80 lb Working Load, Steel, Zinc

Suggested Retail: $2.39

Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Baron Bit Snap, Working Load Limit: 80 lb, Snap Opening Size: 5/16 in, Steel, Zinc, Dimensions: 2-1/2 in L


	1 2 3 ... 29