|
Prime-Line B 629 Door Roller, 1/4 in ID x 3/4 in OD Dia Roller, 1/4 in W Roller, Nylon, White, 2-Roller
|
|
Prime-Line A 111 Door Pull Set, Black, 1-7/8 in W, 4 in H
|
|
Prime-Line A 127 Door Latch Strike, Zinc
|
|
|
|
|
|
|
|
|
Used on Croft and Keller sliding screen doors. 1/4 in W x 3/8 in Dia flat nylon ball bearing wheel with 3/8 in threaded hex hub. Includes 2 rollers and 2 fasteners.
|
Non-handed, surface mount, economy pulls, plastic assembly. Contains one black inside pull, one black outside pull, #4 8 x 3/8 in Phillips flat head sheet metal screws. 1-7/8 in W x 4 in H.
|
This die-cast keeper or strike is used by many screen door manufacturers. It is 7/32 in W with a 1/4 in deep projection. It has an downward hook and adjustment slots that allows it to be adjusted up or down to the correct position to engage the latch.
|
|
|
|
Prime-Line B 551 Door Roller, 1 in Dia Roller, 7/32 in W Roller, Nylon, White, 2-Roller, Bottom
|
|
Prime-Line B 521 Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Plastic/Steel, 2-Roller
|
|
Prime-Line B 512 Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Steel, Gray, 2-Roller
|
|
|
|
|
|
|
|
|
Plastic roller with narrow center groove 7/32 in W nylon wheel, concave edge. Includes a 8-32 x 3/8 in machine screw with binder post nut. Fits on air control doors.
|
1/4 in W center groove nylon wheel, high-tension 2-1/2 in L heat treated steel spring and #8 x 3/8 in Phillips pan head sheet metal screw.
|
Consists of 1/4 in W center groove wheel. Heat-treated, high-tension adjustable steel M-spring. Used by several patio door manufacturers.
|
|
|
|
Prime-Line B 609 Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Nylon/Steel, White, 2-Roller
|
|
Prime-Line B 638 Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Steel, 2-Roller
|
|
Prime-Line A 142 Door Latch and Pull, 2 in Pull W, Plastic/Steel
|
|
|
|
|
|
|
|
|
Bent spring design used by Academy Mfg. And others. Center grooved 5/16 in W wheel, 2-1/4 in L x 5/16 in W flat high-tension heat treated steel spring and #8 x 3/8 in Phillips sheet metal screw.
|
Used by metal industries. Center grooved, 1/4 in W, roller. 1-3/4 in L, high-tension, heat treated steel spring. Includes #8 x 3/8 in Phillips sheet metal screw.
|
Non-handed; mortise installation, used by several door manufacturers. Includes one plastic in side and outside pull, one steel latch assembly, one plastic activator, one pop rivet and installation screws.
|
|
|
|
Prime-Line B 649 Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Plastic/Steel, Gray, 2-Roller
|
|
Prime-Line B 515 Roller Assembly, 1-1/4 in Dia Roller, 1/4 in W Roller, Steel, Gray, 2-Roller
|
|
Prime-Line B 518 Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Plastic/Steel, Silver
|
|
|
|
|
|
|
|
|
Plastic center grooved wheel with steel housing, high-tension steel spring. Fits on Columbia Uni-fit doors. Contents: 2 roller assemblies.
|
Used as top and bottom roller by several patio door manufacturers. Consists of 1/4 in W center groove nylon wheel, 2 in L x 3/8 in W steel housing, high-tension heat-treated steel spring.
|
Used as top and bottom roller. Plastic wheel with center groove. 1-7/8 in L housing. Heat-treated, high-tension steel spring and #8-32 x 1-1/4 in Phillips pan head screw.
|
|
|
|
Prime-Line A 151 Door Latch and Pull, 2-1/8 in W, Plastic/Steel
|
|
Prime-Line B 513 Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Steel, Gray
|
|
Prime-Line B 639 Roller Assembly, 1-3/4 in L Dimensions, 1 in Dia Roller, 1/4 in W Roller, Steel, Gray, 2-Roller
|
|
|
|
|
|
|
|
|
Used by several door manufacturers for non-handed mortise installations. Sliding activator button designed for Jim Walters sliding roll-formed screen door. Includes black plastic inside pull and latch activator, black plastic outside pull, steel latch assembly, pop rivet and installation screws. 2-1/8 in W x 4-1/4 in H handles, 3-5/8 in CTC.
|
Consists of 1/4 in W center groove wheel. Heat-treated, high-tension adjustable steel M-spring. Used by several patio door manufacturers.
|
Used by metal industries. Center grooved, 1/4 in W, roller. 1-3/4 in L, high-tension, heat treated steel spring. Includes #8 x 3/8 in Phillips sheet metal screw.
|
|
|
|
Prime-Line B 645 Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Nylon, White, 2-Roller
|
|
Prime-Line B 570 Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Steel
|
|
Prime-Line D 1502 Door Roller, 1/4 in ID x 1-1/4 in OD Dia Roller, 5/16 in W Roller, Steel, Tan, 2-Roller
|
|
|
|
|
|
|
|
|
Used on Peachtree sliding screen doors. All nylon roller assembly consists of center-grooved wheel and 1-5/32 in L x 13/16 in H x 7/16 in D housing. Includes #8 x 3/8 in Phillips pan head screws.
|
Used by several patio door manufacturers. Consists of 1/4 in W center groove wheel, high-tension heat treated steel V-spring (2 in L before and 2 in L after bend).
|
For sliding glass doors. Center grooved, 5/16 in W steel ball bearing roller and steel inner race with 1/4-20 x 3/4 in carriage bolt and 1/4 in - 20 hex nut.
|
|
|
|
Prime-Line D 1603 Roller Assembly, 2-5/16 in L x 11/16 in W x 1-1/8 in H Dimensions, 1-1/4 in Dia Roller, Steel
|
|
Prime-Line D 1611 Roller Assembly, 2-1/4 in L x 7/8 in W x 1-9/16 in H Dimensions, 1-1/4 in Dia Roller, Steel, 1-Roller
|
|
Prime-Line B 705 Bug Seal, 3/4 to 1-3/8 in W, 7 in L, Vinyl
|
|
|
|
|
|
|
|
|
Used by Crossly and other patio door manufacturers. Steel ball bearing roller and adjustable 2-5/16 in L x 1-1/8 in H x 11/16 to 9/16 in D die-cast housing assembly with 15/16 in flare width.
|
Used on Peachtree patio doors. Steel ball bearing roller, adjustable steel housing 2-1/4 in L x 1-9/16 in H x 17/8 in W. Contents: 1 roller assembly.
|
Prime-Line Bug Seal, Vinyl, 7 in L, 3/4 to 1-3/8 in W
|
|
|
|
Prime-Line D 1688 Roller Assembly, 2 in L x 9/16 in W x 1-3/16 in H Dimensions, 1-1/4 in Dia Roller, 5/16 in W Roller
|
|
Prime-Line D 1563 Roller Assembly, 2-5/8 in L x 3/4 in W x 1-3/8 in H Dimensions, 1-1/2 in Dia Roller, 5/16 in W Roller
|
|
Wright Products V1195 Handleset, Aluminum, 0.9 in L
|
|
|
|
|
|
|
|
|
Steel ball bearing roller and adjustable steel housing assembly. Fits on Nu-Air, Bennings, Scotty and many other patio door manufacturers.
|
Used by Air Control, Howmet, Krestmark and many other patio door manufacturers. Steel ball bearing roller and adjustable 2-5/8 in L x 1-3/8 in H x 3/4 in D steel housing assembly with machine threaded holes (10-32 top and 1/4-20 side) for installation.
|
Flush mount fits into door stile. 1/16 in projection inside/outside of patio door. Reversible for right or left hand application. Packed with 4 different latch hooks to fit virtually all applications. For 1 to 1-1/4 in Thk doors. 6-1/2 in distance between attaching screws.
|
|
|
|
Prime-Line B 684 Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Aluminum, White
|
|
Prime-Line D 1822 Roller Assembly, 1-1/2 in Dia Roller, 5/16 in W Roller, Steel, Yellow, 1-Roller, Plain Back Mounting
|
|
Prime-Line C 1034 Patio Door Handle Pull, 10 in W, Wood
|
|
|
|
|
|
|
|
|
Nylon outer housing, aluminum inner housing with center grooved nylon wheel with adjustment cam. Contents: 2 roller assemblies, installation screws.
|
Steel glass door roller. Housing width: 3/4 in. Roller edge type: Concave. Includes 1 roller assembly.
|
This is an add-on handle usually used on flush-mounted patio door handles. It has a wood handle grab that is 9-15/16 in long that fastens onto the door with chrome mounting brackets with hole centers of 6-5/8 in apart. Once the handle is installed, it projects out from the door 2 in. It can be installed as a separate handle by using E 2056 binder posts and screws.
|
|
|
|
Prime-Line E 2000 Cylinder Replacement, Brass, Chrome, For: 1-1/4 in THK Glass Sliding Doors
|
|
Prime-Line PL 15576 Track Repair Cap, Stainless Steel, Stainless Steel
|
|
Wright Products V1147H Door Pull, Aluminum/Oak
|
|
|
|
|
|
|
|
|
Cylinder Lock, 1-1/4 in, 5-pin tumbler lock with 2 keys, hardened break-away tailpiece. Used to keylock most surface mount handle sets. Keyway is compatible with Weiser?, Kwikset and Weslock.
|
PL 15576 is a 96 in stainless steel track cap used to repair damaged patio or wardrobe door tracks. It can be cut to size. After the old track is prepared by grinding any spots that are wider than the original track width and cleaning it, the new track is simply pressed onto the old track after squirting a thin bead of silicone glue in the replacement track. Using a rubber mallet and a block of wood, the replacement track is snapped down over the old track.
|
Wright replacement oak patio door handle can be installed on the interior plate of the V1195 or VK1195 flush-mounted latches to provide a larger pulling surface.
|
|
|
