|
Prime-Line N 6672 Door Pivot and Guide, Nylon/Plastic, Top
|
|
Prime-Line N 6756 Pull Knob, Hardwood
|
|
Prime-Line N 6606 Adjustable Bi-Fold Door Top Pivot Bracket, Steel
|
|
|
|
|
|
|
|
|
N 6672 is a nylon top-mount bi-fold door pivot. Used by several manufacturers, the spring-loaded 3/8 in nylon pin inserts into the top pivot bracket above creating a pivot point for the bi-fold door.
|
N 6756 is a hardwood bi-fold door pull knob. It has a 1-3/4 in Dia knob and a 11/16 in Dia base. Used on solid wood bi-fold door panels, the large diameter knob is comfortable to use. It can be stained or painted to match. Fits up to a 1-3/8 in THK door.
|
Fits Acme 2900 Series bi-fold doors. Steel bracket mounts into top track. 1-15/16 in L x 3/4 in W overall.
|
|
|
|
Prime-Line N 6706 Door Pivot, Plastic
|
|
Prime-Line N 6673 Door Pivot, Nylon/Steel
|
|
Prime-Line N 6705 Bi-Fold Door Guide, Plastic, Top
|
|
|
|
|
|
|
|
|
N 6706 is a bottom mount pivot used by many bi-fold door manufacturers. The 3/8 in Dia nylon base houses a 1/4 in pivot with a hex head nut for adjustment.
|
N 6673 is a bottom mount pivot used by many bi-fold doors manufacturers. The 3/8 in Dia nylon base houses a grooved pivot tip that screws in or out for adjustment.
|
N 6705 is a spring loaded, 3/4 in square glide or guide in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in THK. Used by Alliance Doors and many bi-fold door manufacturers.
|
|
|
|
Johnson Hardware 1808PPK1 Universal Bi-Fold Panel Aligner Set, For: Bi-Fold Doors
|
|
Prime-Line N 6538 Universal Bi-Fold Door Surface Aligner, Steel, Zinc
|
|
Prime-Line N 6696 Door Pivot, Nylon/Steel
|
|
|
|
|
|
|
|
|
1-1/4 x 2 in, universal bi-fold door aligner, yellow zinc plated finish.
|
universal design, zinc-plated steel. Mounts to back of lead doors to maintain tight closure in openings not entered from both sides. Includes set of 1-1/8 in H aligners and four #8 x 3/4 in Phillips pan head sheet metal screws.
|
N 6696 is a bottom mount pivot used by many bi-fold doors manufacturers. The 7/16 in Dia nylon base houses a grooved pivot tip that screws in or out for adjustment.
|
|
|
|
Johnson Hardware 1817PPK3 Pivot Kit
|
|
Prime-Line N 6729 Guide Rod, Steel, Top
|
|
Prime-Line N 6700 Door Pivot, Plastic
|
|
|
|
|
|
|
|
|
Replaces bottom pivot/jamb bracket pivot used on tap in type hardware.
|
N 6729 is a guide rod used in Benchmark bi-fold door systems. The 5/16 in Dia, 5-1/4 in L steel rod and is threaded on the bottom half with a hex nut and washer. There is a 3/8 in nylon cap on the end.
|
N 6700 is a spring loaded, 1/4 in Dia steel pivot in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in THK.
|
|
|
|
Prime-Line N 6703 Roller Guide, Nylon/Plastic, Top
|
|
National Hardware V391A Series N344-895 Folding Door Aligner, Steel, Zinc
|
|
Prime-Line N 6583 Door Pivot, 30 lb, Nylon/Steel
|
|
|
|
|
|
|
|
|
N 6703 is a spring loaded, 7/8 in Dia nylon roller guide in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in THK. Commonly used by Kenna Frame as well as countless other bi-fold door manufacturers.
|
National Hardware V391A Folding Door Aligner, Steel, Zinc
|
6583 is a top mount bi-fold door pivot. Used on Cox doors, the spring-loaded 1/4 in steel pin inserts into the top pivot bracket above creating a pivot point for the bi-fold door.
|
|
|
|
Prime-Line N 6702 Door Pivot and Guide, Nylon/Steel, Top
|
|
Prime-Line N 6992 Adjustable Pivot Bracket and Pin Kit, Plastic/Steel, Floor
|
|
Prime-Line N 6823 Adjustable Bi-Fold Door Top Pivot Bracket, Steel, Silver, For: 5/8 in Wide Track
|
|
|
|
|
|
|
|
|
N 6702 is a top-mount bi-fold door pivot. Used by several door manufacturers, the 19/32 in spring-loaded pivot pin inserts into the pivot bracket above creating a top pivot point for the bi-fold door.
|
Used by many door manufacturers. Adjustable stamped steel bracket. 2-15/16 in L x 1 in D x 1-1/4 in H overall. Bottom pivot with 7/16 in OD stem, nylon base and steel pin that has a 1/2 in OD tip with 3/8 in W groove. Includes bracket, bottom pivot and 3 installation screws.
|
N 6823 is a stamped steel top pivot bracket. It fits into the Acme 5/8 in W track. The bracket is inserted into the track and as the screw is tightened, it forces the bracket against the lip running the length of both sides of the track. It is adjustable by moving it back or forth to the best position. It is used with the Acme top pivot N 6672.
|
|
|
|
Prime-Line N 6539 Door Snugger, Nylon/Plastic, Top
|
|
Prime-Line N 6582 Door Roller, 7/8 in Dia Roller, 1/4 in W Roller, Nylon, White, 1-Roller, 30 lb, Top
|
|
Prime-Line N 6953 Bi-Fold Door Spring-Loaded Top Roller Guide, Plastic/Steel
|
|
|
|
|
|
|
|
|
N 6539 is a 4 in L bi-fold door snugger that snaps into the center of the bi-fold door track. The guide pin (N 6545) is inserted between the two springs in the nylon snugger housing. As the door is closed, the snugger slides in the track and makes contact with the opposite set of doors. This applies pressure evenly between guide pins. This causes them to remain in the closed position until one of the sets is grabbed by the knob and pulled outward. Used on Acme bi-fold doors.
|
Nylon base; fits Cox doors. 1/4 in W nylon wheel with 7/16 in OD x 1-1/2 in H nylon base self-adjusts from 1-7/8 to 2-1/2 in in track for smooth guiding of lead door. For 1 to 1-3/8 in THK bi-fold doors up to 30 lb each.
|
1/4 in W nylon wheel on spring-loaded steel shaft with plastic housing that tapers to 3/8 in OD to allow for hammering into drilled hole. Self-adjusts from 1-1/2 to 2 in H.
|
|
|
|
Prime-Line N 6543 Adjustable Bi-Fold Door Bottom Pivot Bracket, Steel, Zinc
|
|
Prime-Line N 6587 Adjustable Pivot Bracket, Steel
|
|
Prime-Line N 6656 Door Hinge, 1 in W Frame Leaf, 3 in H Frame Leaf, Steel, Brass
|
|
|
|
|
|
|
|
|
Fits on Acme doors. Adjustable stamped steel bracket and self-lubricating nylon bushing. 2-15/16 in L x 15/16 in D x 1-3/16 in H overall. For 1 to 1-3/8 in THK folding doors up to 50 lb. Each. Includes two #8 x 3/4 in Phillips pan head screws and one #8 x 1-1/4 in Phillips flat head screw.
|
Fits on Cox doors for horizontal adjustments. Adjustable stamped steel bracket and nylon bushing. 2-7/8 in L x 7/8 in D x 1-5/16 in H overall. For 1 to 1-3/8 in THK folding doors up to 50 lb. Each. Includes two #8 x 3/4 in Phillips pan head screws and one #8 x 1-1/4 in Phillips flat head screw.
|
N 6656 is a set of brass-plated bi-fold door hinges. They are the non-mortise style used by very many bi-fold door manufacturers. Made of stamped steel, the hinges have a cutout that allows for the non-mortise installed.
|
|
|
|
Prime-Line N 6545 Door Pivot, 50 lb, Plastic
|
|
Prime-Line N 6701 Door Pivot and Guide, Plastic, Top
|
|
Prime-Line N 6711 Pivot Bracket, 3-1/16 in L x 1 in W x 1/4 in ID Dimensions, Nylon/Steel
|
|
|
|
|
|
|
|
|
N 6545 is a top-mount bi-fold door pivot. Used on Acme and Cox doors, the spring-loaded 3/8 in pin inserts into the pivot bracket above creating a top pivot point for the bi-fold door.
|
N 6701 is a top-mount bi-fold door pivot and guide. Used by Johnson Hardware and other door manufacturers, the spring-loaded pivot pin inserts into the pivot bracket above creating a top pivot point for the bi-fold door or it serves as a guide for the end door as it slides back and forth in the track. See N 6844 for the pivot bracket.
|
Fits on Johnson Hardware doors. Steel bracket with nylon bushing insert to accept pivot pin. 3-1/16 in L x 1 in W overall. Includes two #8 x 1-1/4 in Phillips pan head screws.
|
|
|
|
National Hardware N344-911 Roller Guide, Steel
|
|
Renin BF8081P Aligners, For: Bifold Door
|
|
Prime-Line N 6704 Roller Guide, Nylon/Plastic, Top
|
|
|
|
|
|
|
|
|
National Hardware Roller Guide, Bearing Type: Ball, Steel, Zinc
|
Renin Aligners, Suitable for: Bifold Door
|
N 6704 is a spring loaded, 3/4 in Dia nylon roller guide in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in THK. Used by many bi-fold door manufacturers.
|
|
|
