|
Prime-Line N 6658 Protective Bumper, 7/8 in Dia Base, Rubber
|
|
Prime-Line N 6563 Closet Door Guide, Nylon/Plastic, White, Floor
|
|
Schlage Ives Series 22B15 Rectangular Pull, 3-1/8 in W, 7/16 in D, 1-5/16 in H, Brass, Satin Nickel
|
|
|
|
|
|
|
|
|
N 6658 is 7/8 in Dia anti-slam bumper that is installed onto the jamb with a screw. The bumper stands out 7/16 in from the surface it has been mounted to. It provides a protective anti-slam stop when closing bi-pass wardrobe doors.
|
N 6563 is a white nylon floor guide for 1-3/8 in THK doors. A universal design. At 1-1/8 in tall, it provides a taller than normal guide for most standard thickness closet doors.
|
Schlage Ives Rectangular Pull, 3-1/8 in W, 7/16 in D, 1-5/16 in H, Flush Mounting, Brass, Satin Nickel
|
|
|
|
Renin BP101P Adjustable Door Guide, Metal
|
|
Prime-Line N 6562 Door Guide, 2-7/8 in L x 3/4 in H Dimensions, Nylon, White, Floor, 2/PK
|
|
Prime-Line N 6893 Door Pull, 5/16 in D, Steel, Nickel
|
|
|
|
|
|
|
|
|
BP101P Bypass door floor guide. Screws into the floor to keep bypass doors straight during operation. Adjustable nylon fits doors from 3/4 to 1-3/8 in.
|
N 6562 is a three-piece adjustable floor guide. Made of white nylon, the guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in THK. Used by many closet door manufacturers. The guides extend 3/4 in from the floor. For taller guides see N 6760 or N 6761.
|
Plated steel, universal design fits a 3/4 in Dia hole.
|
|
|
|
Schlage Ives Series 22B10B Rectangular Pull, 3-1/8 in W, 7/16 in D, 1-5/16 in H, Brass, Oil-Rubbed Bronze
|
|
Schlage Ives Series 22B26D Rectangular Pull, 3-1/8 in W, 7/16 in D, 1-5/16 in H, Brass, Satin Chrome
|
|
Prime-Line N 6846 Door Pull, 3/4 in Dia, 5/16 in D, Steel, Brass
|
|
|
|
|
|
|
|
|
Schlage Ives Rectangular Pull, 3-1/8 in W, 7/16 in D, 1-5/16 in H, Flush Mounting, Brass, Oil-Rubbed Bronze
|
Schlage Ives Rectangular Pull, 3-1/8 in W, 7/16 in D, 1-5/16 in H, Flush Mounting, Brass, Satin Chrome
|
Plated steel, universal design fits a 3/4 in Dia hole.
|
|
|
|
Prime-Line N 6564 Door Guide, 4-1/4 in L x 3/4 in W x 7/8 in D Dimensions, Nylon, White, Floor, 2/PK
|
|
Prime-Line N 6698 Door Pull, 2 in Dia, 5/16 in D, Steel, Brass
|
|
Prime-Line N 6761 Door Guide, 2-1/8 in L x 1-1/4 in H Dimensions, Nylon, White, Floor, 2/PK
|
|
|
|
|
|
|
|
|
N 6564 is a 3-Piece adjustable floor guide with adjustable slide sections. Made of white nylon, the 7/8 in tall guides can be adjusted to accommodate doors 3/4 to 1-3/8 in thick. Universal design used by many closet door manufacturers.
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
N 6761 is a three-piece adjustable floor guide. Made of white nylon, the 1-1/4 in tall guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in THK. Used by many closet door manufacturers.
|
|
|
|
Prime-Line N 6760 Door Guide, Nylon/Plastic, White, Floor Mounting
|
|
Prime-Line N 6508 Roller Assembly, 3/4 in Dia Roller, 1/4 in W Roller, Nylon, Brown, 1-Roller, 50 lb, Side
|
|
Prime-Line N 6509 Roller Assembly, 3/4 in Dia Roller, 1/4 in W Roller, Nylon, Brown, 1-Roller, 50 lb, Side
|
|
|
|
|
|
|
|
|
N 6760 is a 3-Piece adjustable floor guide. Made of white nylon, the 1 in tall guides at each end can be adjusted inward to accommodate doors 7/8 to 1-3/8 in thick. Used by many closet door manufacturers.
|
Fits Cox wardrobe doors in top hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in THK by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
Fits Cox wardrobe doors in top hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in THK by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
|
|
|
Prime-Line N 7206 Door Pull, 2 in Dia, 5/16 in D, Steel, Satin Nickel
|
|
Prime-Line N 6765 Door Pull, 1-3/4 in Dia, 5/16 in D, Steel, Brass
|
|
Johnson Hardware 2216PPK2 Wheel Offset Hanger Set, Nylon/Steel, Includes: (2) 1/16 in Single Wheel Sliding Door Hangers
|
|
|
|
|
|
|
|
|
Held in place by two nails used by many wardrobe & door manufacturers. Includes two pull handles, four brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
Johnson Hardware Wheel Offset Hanger Set, Nylon/Steel, Top Mounting, Suitable for: 2200, 2200F and 2222 Series Bypassing Hardware Models, Includes: (2) 1/16 in Offset Single Wheel Sliding Door Hangers
|
|
|
|
Johnson Hardware 2238PPK2 Wheel Offset Hanger Set, Nylon/Steel, Includes: (2) 3/8 in Single Wheel Sliding Door Hangers
|
|
Prime-Line N 6661 Closet Door Guide, Plastic/Steel, White, Floor
|
|
Prime-Line N 6560 Door Guide, Nylon/Steel, Floor
|
|
|
|
|
|
|
|
|
Johnson Hardware Wheel Offset Hanger Set, Nylon/Steel, Top Mounting, Suitable for: 2200, 2200F and 2222 Series Bypassing Hardware Models, Includes: (2) 3/8 in Offset Single Wheel Sliding Door Hangers
|
N 6661 is a bi-pass floor guide that can be used universally on most wardrobe doors systems. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors. The carpet riser shim plates can raise the guides from 1/8 to 5/8 in above the floor to accommodate the height of the carpet.
|
N 6560 is a two-piece adjustable floor guide. Made of white nylon, the guides can be adjusted to accommodate doors 3/4 to 1-3/8 in THK by using the slots in the stamped steel floor base. Used by many closet door manufacturers. The guides extend 5/8 in from the floor.
|
|
|
|
Prime-Line N 7203 Door Pull, 1-3/4 in Dia, 5/16 in D, Steel, Satin Nickel
|
|
Prime-Line N 6516 Roller Assembly, 3/4 in Dia Roller, 1/4 in W Roller, Steel, Silver, 1-Roller, 60 lb, Side
|
|
National Hardware 197 Series N344-846 Door Guide, Polyethylene, Tan, 1/PK
|
|
|
|
|
|
|
|
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
Fits wardrobe doors in top hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon ball bearing wheel. For 3/4 to 1-3/8 in THK doors. Includes 2 #6 x 5/8 in and 1 #4 x 3/4 in Phillips pan head screws.
|
Designed as an adjustable, guide for by-passing doors from 3/4 to 1-3/8 in THK. Keeps door properly aligned. Needs cardboard shim for proper spacing of 2 side sections. Includes screw.
|
|
|
|
National Hardware N344-879 Sliding Door Hanger, Adjustable, 60 lb, Plastic/Steel, For: 3/4 to 1-3/8 in Thick Doors
|
|
National Hardware N344-887 Sliding Door Hanger, Plastic/Steel, For: 3/4 to 1-3/8 in Thick Doors
|
|
Schlage Ives Series 223B15 Oval Pull, 1-5/16 in W, 14/32 in D, 3-9/16 in H, Satin Nickel
|
|
|
|
|
|
|
|
|
National Hardware Adjustable Sliding Door Hanger, 60 lb Weight, Plastic/Steel, Suitable for: 3/4 to 1-3/8 in Bypass Door
|
National Hardware Adjustable Sliding Door Hanger, 60 lb Weight, Plastic/Steel, Suitable for: 3/4 to 1-3/8 in Thick Doors
|
Schlage Ives Oval Pull, 1-5/16 in W, 14/32 in D, 3-9/16 in H, Flush Mounting, Satin Nickel
|
|
|
|
Prime-Line N 7209 Door Pull, 2-1/8 in Dia, 5/16 in D, Steel, Satin Nickel
|
|
Prime-Line N 6512 Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Steel, Silver, 1-Roller, 60 lb, Side Mounting
|
|
Prime-Line N 6500 Roller Assembly, 7/8 in Dia Roller, 1/4 in W Roller, Steel, Silver, 2-Roller, 60 lb, Side
|
|
|
|
|
|
|
|
|
Held in place by two nails used by many wardrobe & door manufacturers. Includes two pull handles, four brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes 3 #8 x 3/4 in Phillips pan head screws.
|
Fits Acme wardrobe doors in top hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in THK doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
|
|
|
