|
Frost King H433FS/3 Seam Binder, 3 ft L, 1-1/4 in W, Fluted Surface, Aluminum, Satin
|
|
Frost King H333FS/3 Seam Binder, 3 ft L, 3/4 in W, Fluted Surface, Aluminum, Satin
|
|
M-D 78014 Seam Binder, 36 in L, 1-1/4 in W, Fluted Surface, Hardwood, Mill/Silver
|
|
|
|
|
|
|
|
|
Joins floor covering of same height. Covers seams and spaces.
|
Joins floor covering of same height. Covers seams and spaces.
|
Individually packaged seam binder easily covers a seam or gap between two flooring surfaces of equal height. M-D's 1-1/4 in seam binder gives your flooring a finished look where two surfaces meet. 3 ft long seam binder ideal for either a new installation or replacement of old floor trim. Made with an attractive and durable silver, fluted design finish.
|
|
|
|
M-D 78048 Seam Binder, 36 in L, 3/4 in W, Fluted Surface, Aluminum, Mill/Silver
|
|
Frost King H433FB/3 Seam Binder, 3 ft L, 1-1/4 in W, Fluted Surface, Aluminum, Gold, Satin
|
|
M-D 79046 Seam Binder, 36 in L, 3/4 in W, Fluted Surface, Aluminum, Satin Brass
|
|
|
|
|
|
|
|
|
Individually packaged seam binder easily covers a seam or gap between two flooring surfaces of equal height. M-D's 3/4 in seam binder gives your flooring a finished look where two surfaces meet. 3 ft long seam binder ideal for either a new installation or replacement of old floor trim. Made with an attractive and durable silver, fluted design finish.
|
Joins floor covering of same height. Covers seams and spaces.
|
M-D Building Products constantly brings new and diverse finishes and products to the consumer flooring market. These American-made carpet seam binders feature anodized and powder coated finishes.
|
|
|
|
M-D 66019 Seam Binder, 36 in L, 1-1/4 in W, Smooth Surface, Aluminum, Polished
|
|
M-D 43872 Seam Binder, 36 in L, 1-1/4 in W, Fluted Surface, Aluminum, Pewter
|
|
M-D 79012 Seam Binder, 36 in L, 1-1/4 in W, Fluted Surface, Aluminum, Satin Brass
|
|
|
|
|
|
|
|
|
M-D Building Products constantly brings new and diverse finishes and products to the consumer flooring market. These American-made carpet seam binders feature anodized and powder coated finishes.
|
Easily covers a seam or gap between two flooring surfaces of equal height. A seam binder gives your flooring a finished look where two surfaces meet. Seam binder ideal for a new installation or replacement of old carpet trims. Made with an attractive fluted design and anodized pewter finish.
|
The 1-1/4 x 36 in fluted satin brass seam binder easily covers a seam or gap between two flooring surfaces of equal height. Seam binders prevent carpet edges from fraying, vinyl floor seams from curling and create a smooth transition between different flooring surfaces. Seam binders are easily secured to wood and concrete floors with provided screw nails. For installation on concrete floors use wooden pegs.
|
|
|
|
Frost King H333FS/6 Seam Binder, 6 ft L, 3/4 in W, Fluted Surface, Aluminum, Satin
|
|
Frost King H433FS/6 Seam Binder, 6 ft L, 1-1/4 in W, Fluted Surface, Aluminum, Satin
|
|
M-D 40132 Seam Binder, 36 in L, 1-1/4 in W, Aluminum, Oak
|
|
|
|
|
|
|
|
|
Joins floor covering of same height. Covers seams and spaces.
|
Joins floor covering of same height. Covers seams and spaces.
|
The 1-1/4 x 36 in Metal Decor oak seam binder easily covers a seam or gap between two flooring surfaces of equal height. Seam binders prevent carpet edges from fraying, vinyl floor seams from curling and create a smooth transition between different flooring surfaces. Seam binders are easily secured to wood and concrete floors with provided screw nails. For installation on concrete floors use wooden pegs.
|
|
|
|
M-D 40136 Seam Binder, 36 in L, 1-1/4 in W, Aluminum, Cherry
|
|
M-D 79095 Seam Binder, 72 in L, 1-1/4 in W, Fluted Surface, Aluminum, Satin Brass
|
|
Frost King H433FB/6 Seam Binder, 6 ft L, 1-1/4 in W, Fluted Surface, Aluminum, Gold, Satin
|
|
|
|
|
|
|
|
|
The 1-1/4 x 36 in Metal Decor cherry seam binder easily covers a seam or gap between two flooring surfaces of equal height. Seam binders prevent carpet edges from fraying, vinyl floor seams from curling and create a smooth transition between different flooring surfaces. Seam binders are easily secured to wood and concrete floors with provided screw nails. For installation on concrete floors use wooden pegs.
|
The 1-1/4 x 72 in fluted satin brass seam binder easily covers a seam or gap between two flooring surfaces of equal height. Seam binders prevent carpet edges from fraying, vinyl floor seams from curling and create a smooth transition between different flooring surfaces. Seam binders are easily secured to wood and concrete floors with provided screw nails. For installation on concrete floors use wooden pegs.
|
Joins floor covering of same height. Covers seams and spaces.
|
|
|
|
M-D 78097 Seam Binder, 72 in L, 1-1/4 in W, Fluted Surface, Aluminum, Mill/Silver
|
|
M-D 43874 Seam Binder, 72 in L, 1-1/4 in W, Fluted Surface, Aluminum, Pewter
|
|
M-D 48941 Seam Binder, 36 in L, 2 in W, Hardwood, Natural, Oak
|
|
|
|
|
|
|
|
|
Easily covers a seam or gap between two flooring surfaces of equal height. M-D's 1-1/4 in seam binder gives your flooring a finished look where two surfaces meet. 6 ft long seam binder ideal for a new installation or replacement of old carpet trims. Made with an attractive and durable silver, fluted design finish.
|
Easily covers a seam or gap between two flooring surfaces of equal height. A seam binder gives your flooring a finished look where two surfaces meet. Seam binder ideal for a new installation or replacement of old carpet trims. Made with an attractive fluted design and anodized pewter finish.
|
Compression-fit holds firmly in place. Fits 1-3/4 in thick doors up to 36 in wide. Three steps to install, measure-trim and slide on. Seals gaps up to 3/4 in.
|
|
|
|
M-D 85233 Seam Binder, 36 in L, 1-1/4 in W, Smooth Surface, Oak Wood, Unfinished
|
|
M-D 43363 Floor Reducer, 36 in L, 1-3/4 in W, Antique Brass
|
|
M-D 66225 Seam Binder, 72 in L, 1-1/4 in W, Smooth Surface, Aluminum, Polished
|
|
|
|
|
|
|
|
|
Individually packaged, unfinished oak seam binder beautifully bridges a seam or gap between two flooring surfaces of equal height. M-D's 1-1/4 in oak seam binder gives your floor the finishing touch where two surfaces meet. 3 ft long oak ideal for doorways and other openings. Includes pre-drilled holes and fasteners for easy installation.
|
M-D Floor Reducer, 36 in Length, 1-3/4 in Width, Antique Brass
|
Easily covers a seam or gap between two flooring surfaces of equal height. M-D's 1-1/4 in seam binder gives your flooring a finished look where two surfaces meet. 6 ft long seam binder ideal for a new installation or replacement of old carpet trims. Made with an attractive and durable smooth polished silver finish.
|
|
|
|
M-D 46147 Multi-Floor Transition, 36 in L, 1-1/2 in W, Aluminum, Cherry
|
|
M-D 40134 Seam Binder, 72 in L, 1-1/4 in W, Aluminum, Oak
|
|
M-D 46141 Multi-Floor Transition, 36 in L, 1-1/2 in W, Aluminum, Oak
|
|
|
|
|
|
|
|
|
The Metal Decor cherry 36 in Multi-floor transition easily cover a seam or gap between two flooring surfaces. Multi-floor transitions have a unique rounded design that transition flooring surfaces of equal or unequal heights. Multi-floor transitions can be secured after floors have been installed to create a seamless look. Multi-floor transitions prevent carpet edges from fraying, vinyl floor seams from curling and creates a smooth transition between different flooring surfaces. Multi-floor transitions are easily secured to wood and concrete floors with provided fasteners.
|
The 1-1/4 x 72 in Metal Decor oak seam binder easily covers a seam or gap between two flooring surfaces of equal height. Seam binders prevent carpet edges from fraying, vinyl floor seams from curling and create a smooth transition between different flooring surfaces. Seam binders are easily secured to wood and concrete floors with provided screw nails. For installation on concrete floors use wooden pegs.
|
The Metal Decor oak 36 in Multi-floor transition easily cover a seam or gap between two flooring surfaces. Multi-floor transitions have a unique rounded design that transition flooring surfaces of equal or unequal heights. Multi-floor transitions can be secured after floors have been installed to create a seamless look. Multi-floor transitions prevent carpet edges from fraying, vinyl floor seams from curling and creates a smooth transition between different flooring surfaces. Multi-floor transitions are easily secured to wood and concrete floors with provided fasteners.
|
|
|
|
M-D 85639 Seam Binder, 36 in L, 2-1/2 in W, Hardwood, Unfinished
|
|
M-D 46240 Multi-Floor Transition, 36 in L, 1-1/2 in W, Aluminum, Beech
|
|
M-D 43360 Floor Reducer, 36 in L, 1-3/4 in W, Forest Brown
|
|
|
|
|
|
|
|
|
The 2-1/2 x 36 in unfinished hardwood seam binder easily covers a seam or gap between two flooring surfaces of equal height. Seam binders prevent carpet edges from fraying, vinyl floor seams from curling and creates a smooth transition between different flooring surfaces. Seam binders are easily secured to wood and concrete floors with provided screw nails. For installation on concrete floors use wooden pegs.
|
These Multi-floor transitions with hidden fasteners from M-D building products adjust to varying floor heights for easy DIY installation. They can be positioned after hard surface floors and adjoining floors have been installed. These transitions feature hidden fasteners for safety and better appearance.
|
M-D Floor Reducer, 36 in Length, 1-3/4 in Width, Forest Brown
|
|
|
|
M-D Cinch Series 43361 Multi-Purpose Reducer, 36 in L, 1-3/4 in W, 1 in Thick, Aluminum, Warm Gray
|
|
M-D 43385 Floor Reducer, 36 in L, 1-3/4 in W, Spice
|
|
M-D 43318 Seam Binder, 36 in L, 1-13/16 in W, Fluted Surface, Aluminum, Stain Nickel
|
|
|
|
|
|
|
|
|
M-D Cinch Multi-Purpose Reducer, 36 in L, 1-3/4 in W, 1 in Thick, Aluminum, Warm Gray
|
M-D Floor Reducer, 36 in Length, 1-3/4 in Width, Spice
|
Connects to uneven floors (up to 1/2 in height difference). Provides a smooth transition between adjoining floors. No fasteners required.
|
|
|
