|
Prime-Line R 7133 Drawer Track Backplate, 3/4 in L, 2-3/4 in W, Nylon/Steel
|
|
Prime-Line R 7145 Drawer Track Backplate, 3/4 in L, 2-13/32 in W, Plastic, Raw
|
|
Prime-Line R 7084 Drawer Track Guide Kit, 2-1/4 in L x 23/32 in W x 1-11/16 in H Dimensions, For: 1/4 x 7/8 in Track
|
|
|
|
|
|
|
|
|
can be inverted for self-adjusting application, used on rolled edge and other center mounted tracks.
|
Used to hold track to back of cabinet, fits most popular side-mount rails. Contains two backplates, two sets of installation screws.
|
Brown polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 1/4 in x 7/8 in track. Contains two guides, four side saddles and two sets of installation fasteners.
|
|
|
|
Prime-Line R 7082 Drawer Track Guide Kit, 25/32 in W Dimensions, For: 9/32 x 3/4 in Track, Plastic, Red
|
|
Prime-Line R 7085 Drawer Track Guide Kit, 1-1/8 in W Dimensions, For: 9/32 x 1-1/8 in Track, Plastic, Green
|
|
Prime-Line R 7130 Drawer Track Guide Kit, Plastic, Purple
|
|
|
|
|
|
|
|
|
Red polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32 x 3/4 in track. Contains 2 guides, 4 side saddles and 2 sets of installation fasteners.
|
Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32 in x 1-1/8 in track.
|
Purple polyethylene guide and white side saddles. Guides used for aligning drawer and making for a smoother operation. Fits a 3/32 x 1-3/16 in track. Contains 2 guides, 4 side saddles and 2 sets of installation fasteners. Designed for use with metal rolled edge tracks.
|
|
|
|
Prime-Line R 7152 Drawer Track Guide Kit, Plastic, Orange
|
|
Prime-Line R 7154 Drawer Track Guide Kit, 1-9/16 in L x 2-1/2 in W Dimensions, For: 3/32 x 1-9/32 in Track, Plastic
|
|
Prime-Line R 7148 Drawer Track Roller, 13/16 in Dia, Plastic/Steel
|
|
|
|
|
|
|
|
|
Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32 in x 1-1/8 in track.
|
Yellow polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 3/32 in x 1-9/32 in track. Contains two guides, four side saddles and two sets of installation fasteners.
|
Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains two roller assemblies, two sets of installation screws.
|
|
|
|
Prime-Line R 7147 Drawer Guide Assembly, 1 in Dia, Plastic/Steel, White
|
|
Prime-Line R 7141 Drawer Track Roller, 13/16 in Dia, Plastic/Steel
|
|
Knape & Vogt 8403P Drawer Bracket, Zinc
|
|
|
|
|
|
|
|
|
Rollers mount at the front of the drawer opening and help center the drawer. This allows for smoother operation. Flat stepped roller edge type, mixed materials. Includes 1 left hand roller, 1 right hand roller and 1 set of installation fasteners.
|
Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains two roller assemblies, two sets of installation screws.
|
Optional rear mounting socket for face frame application simplifies installation. Non-handed. Hardware included. 3-1/2 in L x 1/2 in W. Zinc finish.
|
|
|
|
Prime-Line R7240 Drawer Track Backplate, 2-9/16 in W, Nylon, Raw
|
|
Prime-Line R 7132 Drawer Track Roller, 27/32 in Dia, Plastic/Steel, Gray
|
|
Knape & Vogt 1805-101P Drawer Bracket, Plastic, Epoxy-Coated
|
|
|
|
|
|
|
|
|
White nylon, 2-3/4 in socket depth allows 2 in of front to back adjustment of the rail, used on side mounted drawer track systems. Raw finish. Contains one left hand bracket, one right hand bracket, two sets of installation screws.
|
Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains two roller assemblies, two sets of installation screws.
|
Pair of rear brackets (left and right) for the 1805 epoxy-coated drawer slide features a 2-3/8 in socket.
|
|
|
|
KV True-Trac TT401P Drawer Bracket, Zinc
|
|
Prime-Line R 7321 Drawer Track Guides and Glides, Plastic, Dark Brown
|
|
Knape & Vogt 1805H WH 400 Drawer Slide, 75 lb, 400 mm L Rail, 12.5 mm W Rail, Steel
|
|
|
|
|
|
|
|
|
Optional rear mounting socket for face frame application simplifies installation. Non-handed. Hardware included. 3-1/2 in L x 1/2 in W. Zinc finish.
|
Used on furniture drawer systems, for dressers, hutches and night stand drawers. Opening for metal track on larger piece measures 15/16 in x 3/32 in. Kit includes 2 dark-brown, plastic track case guides and 2 track guides, 4 white, plastic corner glides, 8 ring shank nails for nailing in corner glides (3/4 in x 14-1/2 ga.) and 8 Phillips drive, pan head screws for installation of guides (#6 x 5/8 in).
|
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32 mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four-way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4 in. Required clearance, side of 1/2 in plus 1/32 in minus 0 each side. Top of 1 in required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18 in.
|
|
|
|
Knape & Vogt 1175P ZC 22-5/8 Drawer Slide, 50 lb, Center Undermount Mounting, 22-5/8 in L Rail, 1/2 in W Rail, Steel
|
|
Knape & Vogt 1805H WH 500 Drawer Slide, 75 lb, 500 mm L Rail, 12.5 mm W Rail, Steel
|
|
Knape & Vogt 1805H WH 450 Drawer Slide, 75 lb, 450 mm L Rail, 12.5 mm W Rail
|
|
|
|
|
|
|
|
|
Light-duty slide designed for general drawer applications. Mounts with staples or screws. Height of 1 in. Required Clearance:1/8 in each side, 1-1/2 in from rear of drawer to cabinet, drawer to be 3/8 in shallower than opening. High-density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions.
|
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32 mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four-way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4 in. Required clearance, side of 1/2 in plus 1/32 in minus 0 each side. Top of 1 in required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18 in.
|
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32 mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4 in. Required clearance, side of 1/2 in plus 1/32 in minus 0 each side. Top of 1 in required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18 in.
|
|
|
|
Knape & Vogt 1805H WH 300 Drawer Slide, 75 lb, 300 mm L Rail, 12.5 mm W Rail
|
|
Knape & Vogt 1300P ZC 12 Drawer Slide, 75 lb, 12 in L Rail, 1/2 in W Rail, Steel, Zinc
|
|
Knape & Vogt 1300P ZC 14 Drawer Slide, 75 lb, 14 in L Rail, 1/2 in W Rail, Steel, Zinc
|
|
|
|
|
|
|
|
|
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32 mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4 in. Required clearance, side of 1/2 in plus 1/32 in minus 0 each side. Top of 1 in required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18 in.
|
Designed for medium-duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height of 3 in. Required clearance of 1/2 in plus 1/32 in minus 0 each side. Features Positive stop lever that prevents accidental drawer removal. Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18 in.
|
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height of 3 in. Required clearance of 1/2 in plus 1/32 in minus 0 each side. Features Positive stop lever that prevents accidental drawer removal. Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18 in.
|
|
|
|
KV True-Trac TT100P 400 Drawer Slide, 100 lb, 400 mm L Rail, 12.7 mm W Rail, Zinc
|
|
KV True-Trac TT100P 450 Drawer Slide, 100 lb, 450 mm L Rail, 12.7 mm W Rail, Zinc
|
|
Knape & Vogt 1300P ZC 18 Drawer Slide, 75 lb, 18 in L Rail, 1/2 in W Rail, Steel, Zinc
|
|
|
|
|
|
|
|
|
Direct access mounting holes, precision ball bearings, telescopic action, non-handed design and lever disconnect. Includes screws for installation. Height of 1-1/8 in. Clearance required is 1/2 in plus 1/32 in minus 0 each side. Maximum drawer width 24 in.
|
Direct access mounting holes, precision ball bearings, telescopic action, non-handed design and lever disconnect. Includes screws for installation. Height of 1-1/8 in. Clearance required is 1/2 in plus 1/32 in minus 0 each side. Maximum drawer width 24 in.
|
Designed for medium-duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height of 3 in. Required clearance of 1/2 in plus 1/32 in minus 0 each side. Features Positive stop lever that prevents accidental drawer removal. Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18 in.
|
|
|
|
Knape & Vogt 1300P ZC 16 Drawer Slide, 75 lb, 16 in L Rail, 1/2 in W Rail, Steel, Zinc
|
|
Knape & Vogt 1300P ZC 20 Drawer Slide, 75 lb, 20 in L Rail, 1/2 in W Rail, Steel, Zinc
|
|
Knape & Vogt 1300P ZC 22 Drawer Slide, 75 lb, 22 in L Rail, 1/2 in W Rail, Steel, Zinc
|
|
|
|
|
|
|
|
|
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height of 3 in. Required clearance of 1/2 in plus 1/32 in minus 0 each side. Features Positive stop lever that prevents accidental drawer removal. Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18 in.
|
Designed for medium-duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height of 3 in. Required clearance of 1/2 in plus 1/32 in minus 0 each side. Features Positive stop lever that prevents accidental drawer removal. Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18 in.
|
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height of 3 in. Required clearance of 1/2 in plus 1/32 in minus 0 each side. Features Positive stop lever that prevents accidental drawer removal. Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18 in.
|
|
|
