|
Simpson Strong-Tie LSSR Series LSSR26Z Slopeable/Skewable Rafter Hanger, 5-3/8 in H, 1-9/16 in W, 1-1/2 in, ZMAX
|
|
Simpson Strong-Tie IUS Series IUS2.56/16 I-Joist Hanger, 16 in H, 2 in D, 2-5/8 in W, Steel, Galvanized, Face Mounting
|
|
Simpson Strong-Tie ITS Series ITS2.56/16 I-Joist Top-Flange Hanger with Snap-In Bottom Flange, 15-15/16 in H, 2 in D
|
|
|
|
|
|
|
|
|
The patent pending LSSR light slopeable/skewable rafter hanger is the next generation of a field adjustable rafter hangers. One of its key features is that it can be installed after the rafter has been tacked into place. A versatile hanger, it is field adjustable for skews up to 45 deg and features an innovative hinged swivel seat which adjusts up to a 45 deg slope.
|
The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. Installation is fast with the Strong-Grip? seat, easy-to-reach face nails and self-jigging locator tabs.
|
The innovative ITS is designed to support 90 deg connections of I-joists to headers. This top-flange hanger features the Strong-Grip? seat and Funnel Flange? design allowing standard joist installation without the use of joist nails, resulting in the lowest installed cost.
|
|
|
|
Simpson Strong-Tie LSSR Series LSSR28Z Slopeable/Skewable Rafter Hanger, 7-1/8 in H, 1-9/16 in W, 1-1/2 in, ZMAX
|
|
Simpson Strong-Tie LSSR Series LSSR210Z Slopeable/Skewable Rafter Hanger, 9-1/8 in H, 1-9/16 in W, 1-1/2 in, ZMAX
|
|
Simpson Strong-Tie U210-3 Joist Hanger, 7-3/4 in H, 2 in D, 4-5/8 in W, Steel, Galvanized, Face Mounting
|
|
|
|
|
|
|
|
|
The patent pending LSSR light slopeable/skewable rafter hanger is the next generation of a field adjustable rafter hangers. One of its key features is that it can be installed after the rafter has been tacked into place. A versatile hanger, it is field adjustable for skews up to 45 deg and features an innovative hinged swivel seat which adjusts up to a 45 deg slope.
|
The patent pending LSSR light slopeable/skewable rafter hanger is the next generation of a field adjustable rafter hangers. One of its key features is that it can be installed after the rafter has been tacked into place. A versatile hanger, it is field adjustable for skews up to 45 deg and features an innovative hinged swivel seat which adjusts up to a 45 deg slope.
|
The standard U hanger provides flexibility of joist to header installation. Versatile fastener selection with tested allowable loads.
|
|
|
|
JOIST HANGER LIGHT ZMAX 2X4IN - Case of 12
|
|
JOIST HANGER HEAVY ZMAX 4X6IN - Case of 2
|
|
Simpson Strong-Tie HHUS Series HHUS210-4 Joist Hanger, 8-7/8 in H, 3 in D, 6-1/8 in W, Steel, Galvanized, Face Mounting
|
|
|
|
|
|
|
|
|
APLH light hangers connect 2X joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents? connector screw.
|
APHH heavy hangers connect 4X and 6X beams to girders. These concealed-flange hangers feature straight edges and provide a cleaner looking installation for joist connections. Available in a range of sizes, the hangers install easily to the joist with the Outdoor Accents? structural wood screw and hex head washer and to the header with the Strong-Drive? SDS heavy-duty connector screw.
|
All hangers in this series have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation and the use of standard nails for all connections.
|
|
|
|
JOIST HANGER ZMAX 18GA 2X6IN - Case of 25
|
|
Simpson Strong-Tie HGUS HGUS5.50/10 Joist Hanger, 8-15/16 in H, 4 in D, 5-1/2 in W, 5-1/2 x 10 in, Steel
|
|
HANGER JOIST GALV 18GA 2 X 6IN - Case of 25
|
|
|
|
|
|
|
|
|
The LUC is designed to provide support underneath the joist, rafter or beam to provide a strong connection. This face-mount hanger has concealed header flanges that make for cleaner visible lines in exposed conditions. The LUC is value-engineered for strength and economy and provides for easier and faster installation.
|
The HGUS is an extra-heavy-capacity hanger for applications requiring girder support. This girder hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. Value-engineered, the HGUS is designed to carry high-loads for an economical price.
|
The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
JOIST HANGER LIGHT ZMAX 2X6IN - Case of 24
|
|
JOIST HANGER ZMAX 18GA 2X10IN - Case of 25
|
|
HANGER JOIST GALV 18GA 2X10IN - Case of 25
|
|
|
|
|
|
|
|
|
APLH light hangers connect 2X joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents? connector screw.
|
The LUC is designed to provide support underneath the joist, rafter or beam to provide a strong connection. This face-mount hanger has concealed header flanges that make for cleaner visible lines in exposed conditions. The LUC is value-engineered for strength and economy and provides for easier and faster installation.
|
The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
JOIST HANGER GALV 18GA 2 X 8IN - Case of 25
|
|
JOIST HANGER GALV 18GA 2 X 4IN - Case of 100
|
|
JOIST HANGER ZMAX 18GA 2 X 6IN - Case of 25
|
|
|
Suggested Retail: $119.99
|
|
|
Suggested Retail: $119.99
|
|
|
|
|
|
|
The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
JOIST HANGER GALV 18GA 2X10IN - Case of 50
|
|
JOIST HANGER GALV 18GA 2 X 8IN - Case of 50
|
|
JOIST HANGER ZMAX 18GA 2 X 8IN - Case of 50
|
Suggested Retail: $129.99
|
|
|
Suggested Retail: $129.99
|
|
|
Suggested Retail: $129.99
|
|
|
|
|
|
|
The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
I-JOIST HANGER 2-1/2 X 9-1/2IN - Case of 25
|
|
PST-FRAME HANGER GALV 20GA 2X6 - Case of 25
|
|
JOIST HANGER ZMAX 18GA 4 X 4IN - Case of 25
|
Suggested Retail: $139.99
|
|
|
Suggested Retail: $139.99
|
|
|
Suggested Retail: $139.99
|
|
|
|
|
|
|
The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.
|
The PFDB is a top-flange saddle hanger designed for post-frame construction. It has dome-shaped joist nail holes that guide nails into the proper installation angle. The PFDB features a folded seat that raises the 2X joist slightly above the seat radius to enable a tighter connection to the back of the hanger. The solid, one-piece top-flange allows for accurate and fast installation.
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
I-JOIST HANGER 1-3/4X11-7/8IN - Case of 25
|
|
I-JOIST HANGER GALV 2X9-1/2IN - Case of 25
|
|
JOIST HANGER ZMAX 18GA 2X10IN - Case of 50
|
Suggested Retail: $149.99
|
|
|
Suggested Retail: $149.99
|
|
|
Suggested Retail: $149.99
|
|
|
|
|
|
|
The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.
|
The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.
|
The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
DECK TENSION TIE ZMAX 14GA - Case of 40
|
|
U-HANGER DBL SHR GALV 16GA 2X8 - Case of 25
|
|
JOIST HANGER ZMAX 18GA 2 X 4IN - Case of 100
|
Suggested Retail: $159.99
|
|
|
Suggested Retail: $159.99
|
|
|
Suggested Retail: $159.99
|
|
|
|
|
|
|
DTT tension ties are safe, cost-effective connectors designed to meet or exceed code requirements for deck construction. These versatile DTT connectors are also load-rated as a hold-down for light-duty shearwalls and braced-wall panel applications.
|
The HUS is designed for applications where higher loads are needed. This hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
