|
Simpson Strong-Tie ML23Z L-Angle, 2 in W, 3 in H, Steel, ZMAX
|
|
Simpson Strong-Tie LS LS90Z Skewable Angle, 3-1/2 in W, 1-1/4 in D, 7-7/8 in H, Steel, ZMAX
|
|
Simpson Strong-Tie Avant APVA6 90 deg Ornamental Angle, 3 to 3-1/4 in W, 5 in D, Steel, Black, Powder-Coated
|
|
|
|
|
|
|
|
|
The ML angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference.
|
Simpson Strong-Tie Skewable Angle, Steel, ZMAX, 3-1/2 in Width, 1-1/4 in Depth, 7-7/8 in Height, 18 ga Material Thickness
|
Outdoor Accents? angles tie together beams, rafters and more. The APVA angle makes structural connections between beams and posts more visually appealing. These 90 deg angles make connections stronger and provide consistent, straight corners for a variety of outdoor projects. Part of the Avant collection.
|
|
|
|
L-ANGLE MED ZMAX 12GA 2 X 8IN - Case of 10
|
|
L-ANGLE MED ZMAX 12GA 2 X 4IN - Case of 15
|
|
L-ANGLE MED ZMAX 12GA 2 X 6IN - Case of 15
|
|
|
|
|
|
|
|
|
The ML-angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference.
|
The ML-angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference.
|
The ML-angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference.
|
|
|
|
90DEG ANGLE ZMAX BLACK 12GA 4X - Case of 12
|
|
HURRICANE TIE GALV 1-3/8 X 6IN - Case of 100
|
|
HURRICANE TIE T-SHP GALV 18GA - Case of 100
|
|
|
|
|
|
|
|
|
Outdoor Accents? angles tie together beams, rafters and more. The APVA angle makes structural connections between beams and posts more visually appealing. These 90 deg angles make connections stronger and provide consistent, straight corners for a variety of outdoor projects. Part of the Avant collection.
|
The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads. The symmetrical design eliminates the need for separate right and left parts.
|
The H2.5T single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5T resists both lateral and uplift loads. H2.5T ties are available in left and right-hand models and can be installed in pairs.
|
|
|
|
ANGLE FRMG GALV 1-7/16X4-1/2IN - Case of 100
|
|
CNR CONNECTOR TIE RGD ZMAX 4X - Case of 8
|
|
90DEG ANGLE ZMAX BLK 3-1/4X3IN - Case of 12
|
|
|
|
|
|
|
|
|
The A35 is a balanced and completely reversible framing angle designed for making a variety of connections. The angle's exclusive bend slot allows instant and accurate field bends for all two and three-way ties. The A35 is secured with nails and features a speed prong to temporarily hold the connector in place for easy and fast installation.
|
The RTC is a uniquely designed rigid tie connector that connects two horizontal members at a corner to a vertical wood member. Manufactured to high-quality standards to ensure solid performance, this corner rigid tie connector features a galvanized finish for added corrosion resistance.
|
Outdoor Accents? angles tie together beams, rafters and more. The APA angle makes structural connections between beams and posts much more visually appealing. These angles make connections stronger and provide consistent, straight corners for a variety of outdoor projects.
|
|
|
|
ANGLE FRMG GALV 1-7/16X2-1/2IN - Case of 100
|
|
CONNECTOR STRINGER ADJ ZMAX - Case of 25
|
|
A-ANGLE ZINC GALV 3X3X1-1/2IN - Case of 25
|
|
|
|
|
|
|
|
|
The A34 is a framing angle designed for making a variety of connections. The angle is secured with nails or SD screws and features a speed prong to temporarily hold the connector in place during fastening. The economical A34 provides easy and fast installation.
|
The LSC adjustable stair-stringer connector offers a versatile, concealed connection between the stair-stringer and the carrying header or rim board while replacing costly framing. Field slopeable to all common stair-stringer pitches, the LSC connector is suitable for either solid or notched stringers.
|
Our line of angles provides a way to make a wide range of 90 deg connections.
|
|
|
|
ANGLE FRMG ZMAX 1-7/16X2-1/2IN - Case of 100
|
|
HURRICANE TIE ZMAX 1-3/8 X 6IN - Case of 100
|
|
HURRICANE TIE GALV 1-1/4 X 8IN - Case of 100
|
|
|
|
|
|
|
|
|
The A34 is a framing angle designed for making a variety of connections. The angle is secured with nails or SD screws and features a speed prong to temporarily hold the connector in place during fastening. The economical A34 provides easy and fast installation.
|
The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads. The symmetrical design eliminates the need for separate right and left parts.
|
The H8 single-sided hurricane tie is designed to resist moderate loads at the top of a wall connection. Provides a connection as part of a continuous load path to resist wind and seismic forces. The H8 is versatile and has been tested for connecting I-joist rafters to double-top-plates as well as studs to sill plates.
|
|
|
|
CNR CONNECTOR TIE RGD ZMAX 2X - Case of 12
|
|
A-ANGLE GLV 4-9/16X4-3/8X1-1/2 - Case of 25
|
|
HURRCANE TIE GALV 1-9/16X4-5/8 - Case of 100
|
|
|
Suggested Retail: $119.99
|
|
|
Suggested Retail: $119.99
|
|
|
|
|
|
|
The RTC is a uniquely designed rigid tie connector that connects two horizontal members at a corner to a vertical wood member. Manufactured to high-quality standards to ensure solid performance, this corner rigid tie connector features a galvanized finish for added corrosion resistance.
|
Our line of angles provides a way to make a wide range of 90 deg connections.
|
The H3 single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H3 resists both lateral and uplift loads. H3 ties are available in left and right hand models and can be installed in pairs.
|
|
|
|
L-ANGLE ADJ GALV 18GA 6-3/8IN - Case of 25
|
|
MUDSILL ANCHOR ZMAX 18GA 15IN - Case of 50
|
|
RFTR CONNECTOR RIDGE GALV 18GA - Case of 50
|
Suggested Retail: $119.99
|
|
|
Suggested Retail: $119.99
|
|
|
Suggested Retail: $119.99
|
|
|
|
|
|
|
The LS connector is a cost-effective method for connecting roof rafters to hip rafters. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The LS has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities.
|
The MAB is a mudsill anchor with the design flexibility to anchor the mudsill to concrete block, poured walls or slab foundations. Because of its unique design, the MAB can eliminate certain problems associated with misplaced anchor bolts.
|
An interlock provides alignment control and correct nailing locations. For a rafter-to-face connector, flatten the top flange into the face plane. The RR may be used with rafters sloped up to 30 deg.
|
|
|
|
A-ANGLE GALV 3-7/8X2X2-1/2IN - Case of 25
|
|
L-ANGLE HEAVY GALV 7GA 3 X 3IN - Case of 10
|
|
GUSSET ANGLE GALV 18GA 2-3/4IN - Case of 100
|
Suggested Retail: $129.99
|
|
|
Suggested Retail: $129.99
|
|
|
Suggested Retail: $129.99
|
|
|
|
|
|
|
Our line of angles provides a way to make a wide range of 90 deg connections.
|
The HL is a versatile angle designed to improve corner stability. This multipurpose connector helps promote standardization and construction economy. The L-shaped design of this heavy utility strap makes it ideal for a variety of applications where two members meet at a 90 deg angle.
|
The GA angle is a small, versatile angle designed to improve corner stability. The engineered and tested gusset in the angle increases strength for lateral and uplift loads. The GA installs easily with nails, or for increased loads, with Strong-Drive? SD Connector screws.
|
|
|
|
A-ANGLE GALV 5-7/8X5-7/8X1-1/2 - Case of 25
|
|
HURRICANE TIE ZINC GALV 18GA - Case of 100
|
|
ANGLE FRMG ZMAX 1-7/16X4-1/2IN - Case of 100
|
Suggested Retail: $139.99
|
|
|
Suggested Retail: $139.99
|
|
|
Suggested Retail: $149.99
|
|
|
|
|
|
|
Our line of angles provides a way to make a wide range of 90 deg connections.
|
The H1A provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1A is designed for nominal 2X lumber. These U shaped hurricane ties provide faster installation than using two single-sided ties. The embossments add stiffness in crucial areas for improved performance.
|
The A35 is a balanced and completely reversible framing angle designed for making a variety of connections. The angle's exclusive bend slot allows instant and accurate field bends for all two and three-way ties. The A35 is secured with nails and features a speed prong to temporarily hold the connector in place for easy and fast installation.
|
|
|
