|
Eklind 69207 Hex Key Set, Includes: 5/64 to 1/4 in Keys, 7-Piece, Steel
|
|
Eklind 69205 Hex Key Set, Includes: 2 to 8 mm Keys, 7-Piece, Steel, Black
|
|
Magnet Source 07043 Magnet Block, Ceramic, 1-7/8 in L, 1/2 in W, 3/8 in H
|
|
|
|
|
|
|
|
|
Made with Eklind alloy steel that has been heat-treated for optimum strength and ductility with a black finish to resist rust. Includes inch sizes: 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4 and vinyl pouch. Carded.
|
Made with Eklind alloy steel that has been heat-treated for optimum strength and ductility with a black finish to resist rust. Includes metric sizes: 2, 2.5, 3, 4, 5, 6, 8 and vinyl pouch. Carded.
|
Also known as ferrite magnets, these powerful blocks are ideal for crafters and teachers. Made from the highest grade of ceramic magnet material available, giving them unbeatable pull strength.
|
|
|
|
Magnet Source 07224 Screwdriver Magnetizer/De-Magnetizer, 1 in L, 1 in W, 1 in H, Ceramic/Rubber
|
|
Magnet Source 07005 Magnetic Ring, 3/4 in Dia
|
|
Magnet Source 07001 Magnet Block, Ceramic, Charcoal Gray, 7/8 in L, 3/16 in W, 1/4 in H
|
|
|
|
|
|
|
|
|
Magnetizer/demagnetizer, leave the magnetizer on the tool for extra magnetic strength. To demagnetize, pass the tool through one of the exterior channels.
|
Made from the highest-grade of ceramic magnet material available. Attach to photo frames, calendars, schedules and more to display on ferrous metal surfaces. Used by crafters and teachers.
|
Also known as ferrite magnets, these powerful blocks are ideal for crafters and teachers. Made from the highest grade of ceramic magnet material available, giving them unbeatable pull strength.
|
|
|
|
Magnet Source 07002 Magnetic Disc, 1/2 in Dia, Charcoal Gray
|
|
Magnet Source 07010 Magnet Disc and Tape Strip, Ferrite/Rubber Polymer, 3 in L, 2 in W, 0.06 in H
|
|
Magnet Source 07003 Magnetic Disc, 3/4 in Dia, Charcoal Gray
|
|
|
|
|
|
|
|
|
Ceramic magnet discs are also known as ferrite magnets, these powerful discs work well for small and medium-sized projects. The top selling sizes of discs (1/2 in, 3/4 in and 1 in) are made from the highest grade of ceramic magnet material available, giving them unbeatable pull strength.
|
Magnets are pre-cut with peel-and-stick adhesive giving crafters, teachers, students and do-it yourselfers quick and reliable options for magnetizing a wide range of projects. Ideal for items such as photos, drawings, cards and other lightweight projects. Magnetic strips and dots are pre-scored to break off from sheet.
|
Ceramic magnet discs are also known as ferrite magnets, these powerful discs work well for small and medium sized projects. The top selling sizes of discs (1/2 in, 3/4 in and 1 in) are made from the highest-grade of ceramic magnet material available, giving them unbeatable pull strength.
|
|
|
|
Magnet Source 07004 Magnetic Disc, 1 in Dia, Charcoal Gray
|
|
Magnet Source 07011 Magnetic Tape, 30 in L, 1/2 in W
|
|
Magnet Source 07044 Magnetic Block, 1-7/8 in L, 7/8 in W
|
|
|
|
|
|
|
|
|
Ceramic magnet discs are also known as ferrite magnets, these powerful discs work well for small and medium sized projects. The top selling sizes of discs (1/2 in, 3/4 in and 1 in) are made from the highest-grade of ceramic magnet material available, giving them unbeatable pull strength.
|
Flexible magnetic tape are ideal for making lightweight photos, schedules and memos magnetic. All rolls have adhesive on one-side and magnetism on the other.
|
Ceramic magnet blocks are also known as ferrite magnets, these powerful blocks are ideal for crafters and teachers. Made from the highest-grade of ceramic magnet material available, giving them unbeatable pull strength.
|
|
|
|
Vulcan JL-NP017 Mini Long Nose Pliers, 5 in OAL, 0.5 mm Cutting Capacity, 3 cm Jaw Opening, Black Handle, 1/2 in W Jaw
|
|
Vulcan JL-NP016 Needle Nose Pliers, 5 in OAL, 0.5 mm Cutting Capacity, 4.2 cm Jaw Opening, Black Handle, 1/2 in W Jaw
|
|
Magnet Source 07014 Magnet Sheet, 8 in L, 5 in W, 0.02 in H
|
|
|
|
|
|
|
|
|
Made of drop forged hardened high-carbon steel; fully polished finish resists rust and corrosion; precision milled tapered jaws; hardened and tempered wire cutter; Non-slip vinyl comfort grips; hardness meets or exceeds ANSI standards.
|
Made of drop forged hardened high-carbon steel; fully polished finish resists rust and corrosion; precision milled tapered jaws; hardened and tempered wire cutter; Non-slip vinyl comfort grips; hardness meets or exceeds ANSI standards.
|
Sheets of flexible magnetic material provide a wide array of creative and practical uses. Create magnetic signs, boards, schedules, photos, art and craft projects. Easily cuts with scissors or craft knife. Available with pre-applied adhesive or colored vinyl on one side. Includes project idea sheet.
|
|
|
|
Magnet Source 07216 Round Base Magnet, Ceramic, 0.375 in ID x 1.42 in OD Dia, 0.283 in H
|
|
Eklind 20811 Hex Key Set, Includes: 0.05 to 5/32 in Keys, 8-Piece, Steel, Black
|
|
Vulcan JL-NP003 Slip Joint Pliers, 6 in OAL, 1 in Jaw Opening, Black Handle, Non-Slip Grip Handle, 1 in W Jaw
|
|
|
|
|
|
|
|
|
add a hook or a knob and use this magnet for holding and positioning shop lights, tools, plants and more to steel surfaces such as refrigerators, filing cabinets, metal beams, walls and doors.
|
Made with Eklind alloy steel that has been heat-treated for optimum strength and ductility with a black finish to resist rust and a classic steel handle. Includes inch sizes: 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64 and 5/32. Carded.
|
The Vulcan slip joint plier jaw material is made from carbon steel with a chrome-plated jaw finish. The handle color is black. Overall length is 6 in.
|
|
|
|
Vulcan JL-NP008 Plier, 6-1/2 in OAL, 1.6 mm Cutting Capacity, 3.9 cm Jaw Opening, Black Handle, 3/4 in W Jaw, 2 in L Jaw
|
|
Vulcan JL-NP006 Cutting Pliers, 6 in OAL, 1 mm Cutting Capacity, 3/4 in Jaw Opening, Black Handle, Non-Slip Grip Handle
|
|
Vulcan JL-NP039 Cutting Pliers, 4-1/2 in OAL, 0.8 mm Cutting Capacity, 1/2 in Jaw Opening, Black/Blue Handle
|
|
|
|
|
|
|
|
|
Made of drop-forged high-carbon steel; fully polished rust-resistant finish; tempered and heat-treated for hardness; comfortable non-slip grips.
|
This Vulcan diagonal cutting plier is made of carbon steel with a polished jaw finish. It has comfortable Non-slip grip handle.
|
This Vulcan diagonal cutting plier is made of carbon steel with a polished jaw finish. It has comfortable Non-slip grip handle.
|
|
|
|
Vulcan JL-NP040 Plier Mini End Cut, 0.9 mm Cutting Capacity, Steel Jaw, 4-1/4 in OAL
|
|
Vulcan JL-NP018 Cutting Pliers, 4-1/2 in OAL, 0.4 mm Cutting Capacity, 1/4 in Jaw Opening, Black/Blue Handle
|
|
Magnet Source 07219 Magnetic Clip, 1 in Dia
|
|
|
|
|
|
|
|
|
Durable drop forged chrome nickel steel with TPR handle. Fully polished finish resists rust and corrosion.
|
This Vulcan diagonal cutting plier is made of carbon steel with a polished jaw finish. It has comfortable Non-slip grip handle.
|
These magnetic clips are strong enough to keep those important lists, memos and letters from sliding out of sight. Avoid the frustration of weaker magnets. A must for every shop, kitchen and office.
|
|
|
|
Vulcan JL-NP004 Slip Joint Pliers, 8 in OAL, 1-1/4 in Jaw Opening, Black Handle, Non-Slip Grip Handle, 1-1/4 in W Jaw
|
|
Vulcan PC920-34 Pliers, 6-1/4 in OAL, 1.6 mm Cutting Capacity, 4.7 cm Jaw Opening, Black Handle, Non-Slip Grip Handle
|
|
Vulcan PC974-01 Bent Nose Pliers, 6 in OAL, 1.6 mm Cutting Capacity, 3.9 cm Jaw Opening, Black Handle, 3/4 in W Jaw
|
|
|
|
|
|
|
|
|
The Vulcan slip joint plier jaw material is made from carbon steel with a chrome-plated jaw finish. The handle color is black. Overall length is 8 in.
|
Drop forged hardened high-carbon steel; fully polished finish resists rust and corrosion; precision milled tapered jaws; hardened and tempered wire cutter; Non-slip vinyl comfort grips; hardness meets or exceeds ANSI standards.
|
Drop forged chrome nickel steel for durability. Fully polished finish resists rust and corrosion. Precision milled tapered jaws. Hardened and tempered wire cutter. Ergonomic anti-slip cushioned grips for comfort and less hand fatigue. Hardness meets or exceeds ANSI standards.
|
|
|
|
Vulcan JL-NP014 Diagonal Cutting Plier, 6 in OAL, 1.2 mm Cutting Capacity, 0.75 in Jaw Opening, Black/Blue Handle
|
|
Eklind 20912 Hex Key Set, Includes: 0.05 to 3/16 in Keys, 9-Piece, Steel
|
|
Eklind 20911 Hex Key Set, Includes: 5/64 to 1/4 in Keys, 9-Piece, Black
|
|
|
|
|
|
|
|
|
This Vulcan diagonal cutting plier is made of carbon steel with a polished jaw finish. It has comfortable non-slip grip handle.
|
Made with Eklind alloy steel that has been heat-treated for optimum strength and ductility with a black finish to resist rust and a classic steel handle. Includes inch sizes: 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16. Carded.
|
Made with Eklind alloy steel that has been heat-treated for optimum strength and ductility with a black finish to resist rust and a classic steel handle. Includes inch sizes: 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4. Carded.
|
|
|
