|
DEWALT 08293-PWR Mixing Nozzle, Plastic, For: AC100+ Gold 10 oz and 12 oz Cartridge System
|
|
Simpson Strong-Tie ETB Series ETB6 Hole Cleaning Brush, 4 in L Brush, 16 in OAL, Nylon Bristle
|
|
Simpson Strong-Tie ETB Series ETB8 Hole Cleaning Brush, 4 in L Brush, 16 in OAL, Nylon Bristle, 1/PK
|
|
|
|
|
|
|
|
|
DEWALT Mixing Nozzle, Plastic, Dimensions: 8 in L, Suitable for: AC100+ Gold 10 oz and 12 oz Cartridge System
|
Brushes are used for cleaning drilled holes prior to adhesive anchor installation. Brushes have a twisted wire handle with nylon bristles. For use with Simpson Strong-Tie? ET-3G? adhesives.
|
Brushes are used for cleaning drilled holes prior to adhesive anchor installation. Brushes have a twisted wire handle with nylon bristles. For use with Simpson Strong-Tie? ET-3G? adhesives.
|
|
|
|
Adhesives Technology T3438CK Mixing Nozzle Kit, For: 22 oz Ultra Bond Epoxy Systems
|
|
Simpson Strong-Tie AMN19Q AMN19Q-RP5 Adhesive Mixing Nozzle, For: AT-XP Adhesive Products
|
|
Protective Coating PC-Concrete 72561 2-Part Epoxy Adhesive, White, Paste, 250 mL Cartridge
|
|
|
|
|
|
|
|
|
Nozzle kit for Ultrabond epoxy 22 oz system. Hi-Flow nozzles reduce waste while increasing flow. 15 in length snaps off to 10 in if required. 3/8 in Dia at tip. Built-in mixing nut allows for fast and easy attachment to cartridge.
|
Simpson Strong-Tie? AMN19Q mixing nozzles ensure proper proportioning and mixing of Simpson Strong-Tie? acrylic formulations. Required for compliance with manufacturer's installation instructions.
|
PC-CONCRETE? anchoring and crack filling epoxy is the epoxy chosen to repair cracks in warehouse and factory floors. Dispense and apply using a standard size caulking gun. Cures hard enough to drive over within 3 hr at standard temperature. Nothing stronger for your anchoring applications. PC-CONCRETE? is a two-component (1:1 ratio), 100% solids, high modulus and structural epoxy paste. PC-CONCRETE? is a solvent-free, no-odor, high strength, moisture insensitive epoxy system. The resin and hardener are uniformly dispensed from a 9 oz cartridge system and mixed through a mixing nozzle using a standard size caulking gun.
|
|
|
|
Simpson Strong-Tie EMN22I-RP5 Series Adhesive Mixing Nozzle, For: 22 and 56 oz Epoxy Adhesive Cartridges, 5/PK
|
|
Red Head 7112 Concrete Adhesive Anchor, Paste, 10.1 fl-oz Cartridge
|
|
Sika AnchorFix-1 Series 112729 Anchoring Adhesive, 10.1 oz, Cartridge
|
|
|
|
|
|
|
|
|
An 18-element mixing nozzle with integrated nut for use with 10 oz, 22 oz and 56 oz epoxy adhesive cartridges.
|
Providing code approved performance and a fast 50 min cure time, Red Head T7+ is the concrete anchoring adhesive that delivers.
|
Sika? AnchorFix-1 adhesive anchoring system has been specially formulated as a high-performance, two-component adhesive anchor system for threaded and reinforcing bars in uncracked concrete.
|
|
|
|
DEWALT AC100+ GOLD 8478SDF-PWR Adhesive Epoxy, Paste, 9.5 fl-oz Cartridge, Quick-Shot Cartridge
|
|
Sika AnchorFix-2 Series 112718 Anchoring Adhesive, Gray, 10.1 oz Cartridge
|
|
Quikrete FastSet 8620-30 Anchoring Epoxy, White, 8.6 oz Cartridge
|
|
|
|
|
|
|
|
|
The AC100+ Gold is a two-component vinylester adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The adhesive is designed for bonding threaded rod and reinforcing bar elements into drilled holes in concrete and masonry base materials. It can be considered for use in solid base materials as well as hollow base materials with screen tubes.
|
Sika? AnchorFix-2 adhesive anchoring system has been specially formulated as a high-performance, two-component adhesive anchor system for threaded and reinforcing bars in uncracked concrete.
|
Quikrete? FastSet? anchoring epoxy is a gray solvent-free, low-odor, high strength, moisture insensitive, non-sag epoxy. Quikrete? FastSet? anchoring epoxy is ideal for vertical or horizontal applications, including anchoring bolts, threaded rods and rebar dowels into concrete and masonry substrates. Ideal for fastening in grout filled block and unreinforced masonry and seismic anchoring and bracing.
|
|
|
|
Quikrete 8620-31 Anchoring Epoxy, White, 8.6 oz Cartridge
|
|
Simpson Strong-Tie AT3G AT3G10 High-Strength Hybrid Acrylic Adhesive, Paste, 9.5 oz Cartridge, Coaxial Cartridge
|
|
Simpson Strong-Tie SET-3G SET3G10 High-Strength Epoxy Adhesive, 8.5 oz Cartridge, Coaxial Cartridge
|
|
|
|
|
|
|
|
|
Quikrete? high strength anchoring epoxy is a two-component, high modulus, structural epoxy with an extended working time of approximately 20 mins at 77 deg F, Quikrete? high strength anchoring epoxy is ideal for vertical or horizontal applications, including anchoring bolts, threaded rods and rebar dowels into concrete and masonry substrates. Ideal for fastening in grout filled block and un-reinforced masonry and seismic anchoring and bracing.
|
AT-3G? is a hybrid, acrylic-based adhesive for anchoring threaded rod and rebar into cracked and uncracked concrete. Ideal for cold weather and wet concrete applications, AT-3G? dispenses easily and offers a fast curing time for same-day bolt up. It can be specified for a wide range of in-service temperatures and maintains its strong bond strength in extreme environments for ultimate design and jobsite flexibility. Tested and code compliant with the IBC and IRC, AT-3G? hybrid adhesive is easy to install with the conventional blow-brush-blow hole-cleaning method.
|
SET-3G is an epoxy-based anchoring adhesive with high design strength and proven performance. SET-3G is a 1:1 ratio, two-component, anchoring adhesive for concrete (cracked and uncracked). SET-3G installs and performs in a variety of environmental conditions and temperature extremes.
|
|
|
|
Simpson Strong-Tie CDT10S Manual Dispensing Gun, For: 10 oz Single Adhesive Cartridges, 22 oz Cartridge, 1/PK
|
|
Simpson Strong-Tie SET-3G22-N Epoxy Adhesive, Gray, Paste, 22 oz Cartridge
|
|
Simpson Strong-Tie EDT22S Manual Dispensing Gun, For: 22 oz Adhesive Cartridges, 22 oz Cartridge, Single Cartridge, 1/PK
|
|
|
|
Suggested Retail: $149.99
|
|
|
|
|
|
|
The CDT10S features a steel carriage for ultimate durability and is engineered for continuous, high-volume use. The CDT10S also features double-gripping plates that help extend tool life.
|
SET-3G is the latest innovation in epoxy anchoring adhesives from Simpson Strong-Tie. Formulated to provide excellent performance in cracked and uncracked concrete at elevated temperatures, SET-3G installs and performs in a variety of environmental conditions and temperature extremes. The exceptional bond strength of SET-3G results in high design strengths.
|
The EDT22S epoxy adhesive tool features a steel carriage and is engineered for high-volume, continuous use. The tool can be easily converted (conversion parts included) from dispensing a 22 oz 1:1 ratio cartridge to a 16.5 oz 2:1 ratio cartridge.
|
|
|
