|
Irwin 1788671 Fractional Tap, #8-32 Thread, Bottom Tap Thread, HCS
|
|
Irwin 1791172 Fractional Tap, #10-32 NF Thread, Bottom Tap Thread, HCS
|
|
Irwin POWER-GRIP 53401 Screw Extractor, EX-1 Extractor, 3/32 to 5/32 in, 2.5 to 4 mm, #3 to #6 Bolt/Screw, Spiral Flute
|
|
|
|
|
|
|
|
|
High-carbon steel self aligning taps, ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is needed. Used for hand threading work in a variety of materials, produces class 2B thread. Tap size and recommended drill bit size is laser etched on each tool for easy identification.
|
High-carbon steel self aligning taps, ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is needed. Used for hand threading work in a variety of materials, produces class 2B thread. Tap size and recommended drill bit size is laser etched on each tool for easy identification.
|
Removes broken studs, bolts, socket screws and fittings. Aggressive left hand spiral for extra gripping power.
|
|
|
|
Irwin 1788673 Fractional Tap, 1/4 in- 28 NF Thread, Bottom Tap Thread, HCS
|
|
Irwin 1791173 Fractional Tap, 6.5- 20 NC in Thread, Tapered Thread, HCS
|
|
Irwin 1788672 Fractional Tap, #10-24 NC Thread, Bottom Tap Thread, HCS
|
|
|
|
|
|
|
|
|
Fractional tap 1/4 in - 28 NF, No 7 Self aligning taps, ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is needed. Used for hand threading work in a variety of materials, produces class 2B thread. Tap size and recommended drill bit size is laser etched on each tool for easy identification.
|
High-carbon steel self aligning taps, ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is needed. Used for hand threading work in a variety of materials, produces class 2B thread. Tap size and recommended drill bit size is laser etched on each tool for easy identification.
|
High-carbon steel self aligning taps, ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is needed. Used for hand threading work in a variety of materials, produces class 2B thread. Tap size and recommended drill bit size is laser etched on each tool for easy identification.
|
|
|
|
Irwin 1791137 Fractional Tap, 1/4 in- 20 NC Thread, Bottom Tap Thread, HCS
|
|
Irwin 8018 Machine Screw Tap, #6-32 NC Thread, Plug Tap Thread, 3-Flute, HCS
|
|
Irwin POWER-GRIP 53402 Screw Extractor, EX-2 Extractor, 5/32 to 7/32 in, 4 to 6 mm, #6 to #12 Bolt/Screw, Spiral Flute
|
|
|
|
|
|
|
|
|
High-carbon steel self aligning taps, ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is needed. Used for hand threading work in a variety of materials, produces class 2B thread. Tap size and recommended drill bit size is laser etched on each tool for easy identification.
|
Straight flutes are ground to provide rapid chip removal for efficient threading, for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
|
Removes broken studs, bolts, socket screws and fittings. Aggressive left hand spiral for extra gripping power.
|
|
|
|
Irwin 8024 Machine Screw Tap, #8-32 Thread, Plug Tap Thread, 4-Flute, HCS
|
|
Irwin 8028 Machine Screw Tap, #10-24 NC Thread, Plug Tap Thread, 4-Flute, HCS
|
|
Irwin 8031 Machine Screw Tap, #10-32 NF Thread, Plug Tap Thread, 4-Flute, HCS
|
|
|
|
|
|
|
|
|
Straight flutes are ground to provide rapid chip removal for efficient threading, for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
|
Straight flutes are ground to provide rapid chip removal for efficient threading, for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
|
Straight flutes are ground to provide rapid chip removal for efficient threading, for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
|
|
|
|
Irwin 8120 Fractional Tap, 1/4 in- 20 NC Thread, Plug Tap Thread, 4-Flute, HCS
|
|
Irwin 8123 Fractional Tap, 1/4 in- 28 NF Thread, Plug Tap Thread, 4-Flute, HCS
|
|
Irwin 8032 Machine Screw Tap, #12-24 NC Thread, Plug Tap Thread, 4-Flute, HCS
|
|
|
|
|
|
|
|
|
Four straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
|
Four straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
|
Straight flutes are ground to provide rapid chip removal for efficient threading, for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
|
|
|
|
Irwin POWER-GRIP 53403 Screw Extractor, EX-3 Extractor, 7/32 to 9/32 in, 6 to 8 mm, #12 Bolt/Screw, Spiral Flute, Steel
|
|
TAP 5/16 IN -18NC BOTTOM
|
|
Irwin 8317 Thread Tap, 4 mm- 0.7 Thread, Plug Tap Thread, 4-Flute, HCS
|
|
|
|
|
|
|
|
|
Removes broken studs, bolts, socket screws and fittings. Aggressive left hand spiral for extra gripping power.
|
|
Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
|
|
|
|
Irwin 8322ZR Thread Tap, 5 mm- 0.8 Thread, Plug Tap Thread, 4-Flute, HCS
|
|
Irwin 1791177 Fractional Tap, 5/16-24 Thread, Bottom Tap Thread, HCS
|
|
Irwin POWER-GRIP 53601 Screw Extractor, ST-1 Extractor, 3/16 to 5/16 in, 5 to 8 mm, #10 Bolt/Screw, Straight Flute
|
|
|
|
|
|
|
|
|
Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
|
High-carbon steel self aligning taps, ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is needed. Used for hand threading work in a variety of materials, produces class 2B thread. Tap size and recommended drill bit size is laser etched on each tool for easy identification.
|
Made from rugged, high carbon steel for use in soft materials or thin-walled pieces such as pipe and fittings. Able to remove left-hand bolts as well as right-hand bolts. Extractor size and recommended drill bit size are etched on each tool for easy identification.
|
|
|
|
Irwin 1788668 Fractional Tap, 10.5- 18 NC in Thread, Tapered Thread, HCS
|
|
Irwin 8318 Thread Tap, 4 mm- 0.75 Thread, Plug Tap Thread, 4-Flute, HCS
|
|
Irwin 8035 Machine Screw Tap, #14-20 NS Thread, Plug Tap Thread, 4-Flute, HCS
|
|
|
|
|
|
|
|
|
High-carbon steel self aligning taps, ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is needed. Used for hand threading work in a variety of materials, produces class 2B thread. Tap size and recommended drill bit size is laser etched on each tool for easy identification.
|
Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
|
Straight flutes are ground to provide rapid chip removal for efficient threading, for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
|
|
|
|
Irwin 8312 Thread Tap, 3 mm- 0.5 Thread, Plug Tap Thread, 3-Flute, HCS
|
|
Irwin 8323 Thread Tap, 5 mm- 0.9 Thread, Plug Tap Thread, 4-Flute, HCS
|
|
Irwin 8327 Thread Tap, 6 mm- 1 Thread, Plug Tap Thread, 4-Flute, HCS
|
|
|
|
|
|
|
|
|
Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
|
Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
|
Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.
|
|
|
|
Irwin POWER-GRIP 53404 Screw Extractor, EX-4 Extractor, 9/32 to 3/8 in, 1/8 in NPT, 1/8 in BSP, 8 to 10 mm Bolt/Screw
|
|
Irwin 9502ZR Taper Pipe Die, 1/8-27 Thread, NPT Thread, Right Hand Thread, HCS
|
|
Irwin POWER-GRIP 53602 Screw Extractor, ST-2 Extractor, 3/8 in Bolt/Screw, Straight Flute, Steel
|
|
|
|
|
|
|
|
|
Removes broken studs, bolts, socket screws and fittings. Aggressive left hand spiral for extra gripping power.
|
Ideal for plumbing and air applications.
|
Made from rugged, high carbon steel for use in soft materials or thin-walled pieces such as pipe and fittings. Able to remove left-hand bolts as well as right-hand bolts. Extractor size and recommended drill bit size are etched on each tool for easy identification.
|
|
|
