|
SWITCHBOX PVC 1GNG NEW 2-7/8IN
|
|
SWITCHBOX PVC 1GNG NEW 3-1/4IN
|
|
BOX WALL PVC 1GNG 1.5IN 22.5CU
|
|
|
|
|
|
|
|
|
With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies.
|
With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies.
|
With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies.
|
|
|
|
fiberglassBOX 1098-N Electrical Box, 1 -Gang, Fiberglass Reinforced Polyester BMC, Beige/Tan, Wall Mounting
|
|
fiberglassBOX 1099-N Electrical Box, 1 -Gang, 2 -Outlet, 4 -Knockout, Fiberglass Reinforced Polyester BMC
|
|
Gardner Bender BOX-RS14 Switch/Outlet Box, Standard Outlet, 1-Gang, 4-Knockout, PVC, Gray, In-Wall
|
|
|
|
|
|
|
|
|
Thermoset fiberglass with angled mid-nails. Nails are installed as fastening devices. 2 hrs wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. UL listed.
|
Thermoset fiberglass with angled mid-nails. Nails are installed as fastening devices. 2 hrs wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. UL listed.
|
GB's old work single gang switch/outlet boxes are constructed of high-grade PVC for greater performance with a lower installation cost. They are designed and listed for use with Non-metallic sheathed cable and Non-metallic raceway in accordance with Article 314 of the National electric Code. The retrofit box features adjustable tabs for convenient mounting.
|
|
|
|
Gardner Bender BOX-NS18 Switch/Outlet Box, 18 cu-in, Standard Outlet, 1-Gang, 4-Knockout, PVC, Gray, In-Wall, Nail
|
|
BOX OUTLET PVC 1G SHLW NW ZIP
|
|
BOX OUTLET PVC 1G OLD SHALLOW
|
|
|
|
|
|
|
|
|
GB's new work single gang switch/outlet boxes are constructed of high-grade PVC for greater performance with a lower installation cost. They are designed and listed for use with Non-metallic sheathed cable and Non-metallic raceway in accordance with Article 314 of the National electric Code. Captive nails are included for easy mounting.
|
New work applications, shallow PVC switch box. Integral brackets. 1-1/4" depth x 2-3/8" x 3-5/8". UL Listed.
|
Designed and listed for use with non-metallic sheathed cable. With mounting ears. Permissible for use with 90 degree C connectors. 8 cubic inch capacity. 1-1/4" depth x 2-3/8" x 3-5/8". UL Listed.
|
|
|
|
Carlon BH122A-UPC Outlet Box, 22 cu-in, 1-Gang, PVC, Blue, Nail
|
|
BOX OUTLET PVC 1GNG OLDWK WALL
|
|
Carlon B118B-UPC Outlet Box with Bracket, 1-Gang, 4-Knockout, PVC, Blue, Bracket, Stud
|
|
|
|
|
|
|
|
|
Lightweight design and durable plastic. Listed for masonry walls. Safe to install and will never rust or corrode. Includes nails for quick, easy installation. 22 cu-in rigid wall. 3-7/8 in x 2-3/8 in x 3-3/4 in. UL listed.
|
Old work wall case. Safe, non-conductive. Two Zip-Mount retainers. Four integral clamps, two each end; mounting ears. 14 cubic inch, 2-3/4" x 2-1/4" x 4-1/8". UL Listed.
|
Safe, Non-conductive. With bracket for 3/8 to 5/8 in wallboard. Steel and wood studs, 4 knockouts. 2-15/16 in D x 3-3/4 in x 2-1/4 in.
|
|
|
|
BOX OUTLET PVC 2G NEW WRK NAIL
|
|
Raco 7887RAC Cable Box, 1-Gang, PVC, Gray, Flush
|
|
Gardner Bender BOX-RS8 Switch/Outlet Box, Shallow Outlet, 1-Gang, PVC, Gray, In-Wall
|
|
|
|
|
|
|
|
|
New work safe, non-conductive. With captive nails. Eight integral clamps, four each side. 32 cubic inches. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies. 3" depth x 4" x 3-3/4".
|
Plaster ears, old work swing style clips secure box in wall. Integral clamps. Two hour fire rated. Mounting clips. 3 in D. 14 cu-in capacity. UL listed.
|
GB's old work single gang switch/outlet boxes are constructed of high-grade PVC for greater performance with a lower installation cost. They are designed and listed for use with Non-metallic sheathed cable and Non-metallic raceway in accordance with Article 314 of the National electric Code. The retrofit box features adjustable tabs for convenient mounting.
|
|
|
|
Smart Box MSB1G Device Box, 1 -Gang, 4 -Knockout, 1/2 in Knockout, PVC, Gray, Screw Mounting
|
|
Gardner Bender BOX-NS20 Switch/Outlet Box, 20 cu-in, Standard Outlet, 1-Gang, 4-Knockout, PVC, Gray, In-Wall, Nail
|
|
fiberglassBOX 9361-ESK Switch/Outlet Box, 1-Gang, 2-Outlet, 4-Knockout, Fiberglass/Polyester, Off-White, Bracket
|
|
|
|
|
|
|
|
|
Smart Box Device Box, 4 Knockouts, 1/2 in Knockout, 1 Gangs, 18.5 cu-in, Dimensions: 3-3/4 in H x 2-1/4 in W x 3-1/2 in D, PVC, Gray, Screw Mounting
|
GB's new work single gang switch/outlet boxes are constructed of high-grade PVC for greater performance with a lower installation cost. They are designed and listed for use with Non-metallic sheathed cable and Non-metallic raceway in accordance with Article 314 of the National electric Code. Captive nails are included for easy mounting.
|
fiberglassBOX Switch/Outlet Box, Knockout Cable Entry, 2 Outlets, 4 Knockouts, 1 Gangs, Rectangular Shape, 16 cu-in, Dimensions: 3-1/4 in H x 2-3/8 in W x 2-7/8 in D, Fiberglass/Polyester, Off-White, Bracket Mounting
|
|
|
|
fiberglassBOX 9363-EWK Electrical Box, 1 -Gang, Fiberglass Reinforced Polyester BMC, Beige/Tan, Bracket Mounting
|
|
Carlon A58381D-CAR Outlet Box, 1-Gang, 3-Knockout, 1/2 in Knockout, PVC, Blue, Bracket Mounting
|
|
SWITCHBOX FBGL 2GNG NEW NAILS
|
|
|
|
|
|
|
|
|
Thermoset fiberglass with ears, wing brackets, speed clamps. 2 hrs wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2-7/8 in x 2-3/8 x 3-1/4. UL listed.
|
Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 V use in ceilings, floors and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3 in x 2-1/4 in x 3 in. UL listed.
|
Thermoset-fiberglass, with angled mid-nails, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2 hour wall fire rating. 3" depth x 4" x 3-3/4". UL Listed.
|
|
|
|
Madison Electric MSBHZ Adjustable Depth Device Box, 3-3/4 in L, 3.82 in W, 1 -Gang, PVC, Gray
|
|
Raco 7488RAC Cable Box, 2-Gang, PVC, Gray, Flush
|
|
BOX OUTLET PVC 1G OLD ERS 20CU
|
|
|
|
|
|
|
|
|
The original smart boxes are unmatched in versatility in new work locations where you cannot swing a hammer or where final wall surfaces are uncertain, like kitchens and baths. Interior mounting screws allow for depth adjustability to accommodate tile, paneling and other specialty wall treatments. Smart boxes are unmatched in both new or old work applications because they are always mounted to a stud.
|
Old work PVC box. With swing clips and integral clamps to hold securely. 3-5/32 in D. 25 cu-in capacity.
|
With mounting ears and swing bracket. 4 integral clamps, 2 each end. UL Listed, meets NEMA OS-2. Suitable for masonry walls, not UL Classified for Fire Resistance. PVC construction. 20 cubic inch capacity. 3-5/8" depth x 2-5/16" x 4-1/8".
|
|
|
|
Sliderbox SB-1 Electrical Box, 1-Gang, 2-Outlet, 1-Knockout, 1/2 in Knockout, PVC, Beige/Tan, Screw, Wall
|
|
Carlon BH235A Outlet Box, 35 cu-in, 2-Gang, PVC, Blue, Nail
|
|
BOX OUTLET PVC 1GNG ENT NEW/IN
|
|
|
|
|
|
|
|
|
Molded of engineering grade non-metallic thermoplastic. Adjustable, no need to remove or relocate mounting screws to re-position the box. Slots retain slider plate and guide it in a straight motion. Internal rails guide slider plate for smooth mounting adjustability in wall substrates from 1/2 in to 1-3/8 in thick and ceiling substrates from 1/2 in to 1-5/32 in. Square corner design allows easy wall cut-in (Old work applications). Molded spline device holes for quick device screw installation. 23 cu-in volume, 1/2 in knockout. Internal steel, stud/wood screws. 3-9/16 in D x 2-1/4 in W x 3-3/4 in H. UL listed for 2 hrs fire resistive walls and ceilings.
|
PVC handy box used for many wiring applications. Weather-resistant and Non-conductive. Will accept metal handy box covers or Non-metallic covers. 35 cu-in rigid wall.
|
Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 volt use in ceilings, floors, and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3" x 2-1/4" x 1-7/8". UL Listed.
|
|
|
|
Gardner Bender BOX-ND32 Switch/Outlet Box, Standard Outlet, 2-Gang, 8-Knockout, PVC, Gray, In-Wall, Nail
|
|
Smart Box MSB22+ Device Box, 1 -Gang, 4 -Knockout, 1/2 in Knockout, PVC, Gray, Wall Mounting
|
|
Carlon B121ADJ New Work Outlet Box, 21 cu-in, 1-Gang, PVC, Blue, Bracket
|
|
|
|
|
|
|
|
|
GB's new work double gang switch/outlet boxes are constructed of high-grade PVC for greater performance with a lower installation cost. They are designed and listed for use with Non-metallic sheathed cable and Non-metallic raceway in accordance with Article 314 of the National electric Code. Captive nails are included for easy mounting.
|
Unmatched in adjustability. Molded entirely of 1 piece with no moving parts to break or lose. Step down feature allows for wire entrance in both top and bottom of box. Mounts to wood or metal stud 25 g. Extra thick PVC wall material creates stability and rigidity. Built-in wire clamps. All 6/32 device holes are threaded.
|
Provides simple installation and allows adjustment from 0 to 1-3/4 in with the turn of a screw. Clip the included bracket onto any stud, mounts square and secure every time. Securing the bracket to the stud ensures that the box will not move. Comes preset at 1/2 in. 3-3/8 in D x 3-7/8 in x 3-3/4 in. Permissible for use with 90 deg C connectors. Satisfies NEC 370-20. UL listed 5Z74 and classified 2 Hr W/C.
|
|
|
