|
JM Eagle 67447 Electrical Conduit, 0.7 in OD, 0.62 in, 10 ft L, SCH 40, PVC
|
|
JM Eagle 67454 Electrical Conduit, 3/4 in, 10 ft L, SCH 40, PVC, Gray
|
|
Allied Tube & Conduit 101543 EMT Conduit, 1/2 in, 10 ft L, Steel, Galvanized
|
|
|
|
|
|
|
|
|
Safe, Non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy-to install. will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10 ft L with one bell end.
|
Safe, Non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy-to install. will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10 ft L with one bell end.
|
Allied Tube & Conduit EMT Conduit, Trade Size: 1/2 in, 5/8 in Dia Inside, 45/64 in Dia Outside, Steel, Galvanized, 10 ft L
|
|
|
|
JM Eagle 67611 Conduit, 1/2 in, 10 ft L, SCH 80, PVC, Gray
|
|
JM Eagle 67462 Rigid Conduit, 1 in, 10 ft L, SCH 40, PVC, Gray
|
|
Carlon Flex-Plus 12007-UPC ENT Raceway, 0.76 in ID x 1.05 in OD Cable, For: PVC Rigid Non-Metallic Conduit Fittings
|
|
|
|
|
|
|
|
|
JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations.
|
JM Eagle's SCH 40 and SCH 80 PVC rigid Non-metallic conduit is designed and produced for use in both aboveground and underground installations.
|
Designed for use with 90 deg C conductors, the hand bendable conduit offers the safety of assured grounding. For 600 V use in walls, floors and ceilings in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. UL listed.
|
|
|
|
JM Eagle 67603 Rigid Conduit, 3/4 in, 10 ft L, SCH 80, PVC, Gray
|
|
Allied Tube & Conduit 101550 EMT Conduit, 3/4 in, 10 ft L, Steel, Galvanized
|
|
JM Eagle 67470 Rigid Conduit, 1-1/4 in, 10 ft L, SCH 40, PVC, Gray
|
|
|
|
|
|
|
|
|
JM Eagle's SCH 40 and SCH 80 PVC rigid Non-metallic conduit is designed and produced for use in both aboveground and underground installations.
|
High-grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating and a clear organic polymer top coat to form a triple layer of protection against corrosion and abrasion. Has a low-friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL listed, meets ANSI C80.3.
|
JM Eagle's SCH 40 PVC rigid Non-metallic conduit is designed and produced for use in both aboveground and underground installations.
|
|
|
|
JM Eagle 67595 Conduit, 1 in, 10 ft L, SCH 80, PVC, Gray
|
|
JM Eagle 67488 Rigid Conduit, 1-1/2 in, 10 ft L, SCH 40, PVC, Gray
|
|
JM Eagle 67496 Rigid Conduit, 2 in, 10 ft L, SCH 40, PVC, Gray
|
|
|
|
|
|
|
|
|
JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations.
|
JM Eagle's SCH 40 and SCH 80 PVC rigid Non-metallic conduit is designed and produced for use in both aboveground and underground installations.
|
JM Eagle's SCH 40 and SCH 80 PVC rigid Non-metallic conduit is designed and produced for use in both aboveground and underground installations.
|
|
|
|
Allied Tube & Conduit 101568 EMT Conduit, 1 in, 10 ft L, Steel, Galvanized
|
|
JM Eagle 67587 Conduit, 1-1/4 in, 10 ft L, SCH 80, PVC, Gray
|
|
Southwire Ultratite 55094221 Conduit, 1/2 in, 25 ft L, PVC
|
|
|
|
|
|
|
|
|
High-grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating and a clear organic polymer top coat to form a triple layer of protection against corrosion and abrasion. Has a low-friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL listed, meets ANSI C80.3.
|
JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations.
|
For the installation and protection of electrical conductors in circuits of 600 V or less. Manufactured with a spiral of rigid PVC reinforcement imbedded within a flexible PVC wall. Impact- and crush-resistant, liquidtight and highly flexible. UV sunlight-resistant jacket. Rated for temperature range of -30 to 80 deg C, 60 deg C Oil (-22 to +176, 140 deg F Oil). UL listed.
|
|
|
|
JM Eagle 67579 Conduit, 1-1/2 in, 10 ft L, SCH 80, PVC, Gray
|
|
Carlon 150DRB Conduit, 1/2 in, 6 ft L, PVC
|
|
Southwire 55189407 Decorative Flexible Whip, 10 AWG Cable, 6 ft L, Copper Conductor, THHN Insulation
|
|
|
|
|
|
|
|
|
JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations.
|
Contains everything necessary for complete installation including 6 ft conduit, two straight fittings and one 90 deg fitting. Totally non-metallic system provides assured grounding for safety. Non-conductive, non-corrosive. Easy to install. UL listed components.
|
-resistant to rust, cracks and separation. Constructed with two different PVC materials. 600 V stranded copper THHN/THWN conductors and UL listed LFNC-B fittings. 12 in wire leads are left exposed at each end. Green insulated copper grounding conductor. Intended for 208/240/480 V. UL/CSA, complies with NEC Article 356.
|
|
|
|
JM Eagle 67504 Conduit, 2-1/2 in, 10 ft L, SCH 40, PVC, Gray
|
|
JM Eagle 67561 Rigid Conduit, 2 in, 10 ft L, SCH 80, PVC, Gray
|
|
Carlon 150ERB-UPC Conduit, 3/4 in, 6 ft L, PVC
|
|
|
|
|
|
|
|
|
JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations.
|
JM Eagle's SCH 40 and SCH 80 PVC rigid Non-metallic conduit is designed and produced for use in both aboveground and underground installations.
|
Carlon Conduit, Flexible, Trade Size: 3/4 in, PVC, 6 ft L
|
|
|
|
Allied Tube & Conduit 101576 EMT Conduit, 1-1/4 in, 10 ft L, Steel, Hot-Dip Galvanized
|
|
Southwire Alflex FO3750050M Conduit, 3/8 in, 50 ft L, Aluminum
|
|
Allied Tube & Conduit 103051 Conduit, 1/2 in, 10 ft L, Steel, Galvanized
|
|
|
|
|
|
|
|
|
High-grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating and a clear organic polymer top coat to form a triple layer of protection against corrosion and abrasion. Has a low-friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL listed, meets ANSI C80.3.
|
Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334.
|
Manufactured from mild steel, Allied's Rigid Conduit is highly resistant to damage from impact yet ductile to facilitate bending. The 3/4 in taper NPT threads (ANSI B1.20.1) are full cut and hot galvanized after cutting. Color-coded end cap thread protectors keep the threads clean, sharp and also provide instant trade size recognition. Even sizes are color-coded blue, 1/2 sizes black and 1/4 sizes red.
|
|
|
|
Southwire 55189301 Decorative Flexible Whip, 10 AWG Cable, Copper Conductor, THHN Insulation
|
|
Allied Tube & Conduit 103069 Conduit, 3/4 in, 10 ft L, Steel, Galvanized
|
|
JM Eagle 67512 Conduit, 3 in, 10 ft L, SCH 40, PVC, Gray
|
|
|
|
|
|
|
|
|
-resistant to rust, cracks and separation. Constructed with two different PVC materials. 600 V stranded copper THHN/THWN conductors and UL listed LFNC-B fittings. 12 in wire leads are left exposed at each end. Green insulated copper grounding conductor. Intended for 208/240/480 V. UL/CSA, complies with NEC Article 356.
|
Manufactured from mild steel, Allied's Rigid Conduit is highly resistant to damage from impact yet ductile to facilitate bending. The 3/4 in taper NPT threads (ANSI B1.20.1) are full cut and hot galvanized after cutting. Color-coded end cap thread protectors keep the threads clean, sharp and also provide instant trade size recognition. Even sizes are color-coded blue, 1/2 sizes black and 1/4 sizes red.
|
JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations.
|
|
|
|
Allied Tube & Conduit 101584 EMT Conduit, 1-1/2 in, 10 ft L, Steel, Silver, Galvanized
|
|
Southwire Alflex FO5000025M Flexible Conduit, 1/2 in, 25 ft L, Aluminum
|
|
Southwire Ultratite 55094321 Conduit, 3/4 in, 25 ft L, PVC
|
|
|
|
|
|
|
|
|
High-grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating and a clear organic polymer top coat to form a triple layer of protection against corrosion and abrasion. Has a low-friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL listed, meets ANSI C80.3.
|
Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard no 1569 and Article 334.
|
For the installation and protection of electrical conductors in circuits of 600 V or less. Manufactured with a spiral of rigid PVC reinforcement imbedded within a flexible PVC wall. Impact- and crush-resistant, liquidtight and highly flexible. UV sunlight-resistant jacket. Rated for temperature range of -30 to 80 deg C, 60 deg C Oil (-22 to +176, 140 deg F Oil). UL listed.
|
|
|
