|
SCREW GROUNDING RND HD GRN
|
|
Gardner Bender GGP-1502 Grounding Pigtail, 12 AWG Wire, Copper, Green, 2/BAG
|
|
nVent ERICO ZWP1J Pipe Clamp, Clamping Range: 1/2 to 1 in, 10 to 6 AWG Wire, Zinc
|
|
|
|
|
|
|
|
|
Green round washer head screw for switch and outlet boxes.
|
GB? offers a convenient grounding accessories line of products suitable for most job requirements. This grounding pig tail is made from #12 AWG stranded wire. One end is terminated with a bare fork terminal. The other end is a captured screw.
|
Bolted water pipe clamps made of zinc die-cast. Wire range 8 solid to 2 stranded. UL listed. Connects grounding wire to the grounding rod.
|
|
|
|
Gardner Bender GGC-1508 Ground Clip, Zinc
|
|
GROUND WIRE CLIP GRN 14-10AWG - Case of 10
|
|
Halex 93592 Ground Rod Clamp, Clamping Range: 5/8 in, Bronze, 1/BAG
|
|
|
|
|
|
|
|
|
Convenient grounding accessories include products suitable for most job requirements.
|
Southwire Ground Clip, Wire Size: 14 to 10 AWG, Steel, Green, Dimensions: 0.1 in H x 2 in W
|
Connects grounding wire to the grounding rod.
|
|
|
|
Gardner Bender 14-GRC Ground Clamp, Clamping Range: 1/2 to 1 in, 10 to 2 AWG Wire, Galvanized
|
|
Halex 93591 Ground Rod Clamp, Clamping Range: 1/2 in, Bronze, 1/BAG
|
|
Halex 36010 Ground Clamp, Clamping Range: 1/2 to 1 in, 10 to 2 AWG Wire, Bronze, 2-5/16 in W x 2-1/2 in H, 1/BAG
|
|
|
|
|
|
|
|
|
Connects grounding wire to the grounding rod.
|
Connects grounding wire to the grounding rod.
|
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.
|
|
|
|
nVent ERICO CWP1J Pipe Clamp, Clamping Range: 1/2 to 1 in, #10 to 2 AWG Wire
|
|
nVent ERICO CWP1JU Pipe Clamp, Clamping Range: 1/2 to 1 in, #10 to 2 AWG Wire, Silicone Bronze
|
|
nVent ERICO EK17 Perpendicular Ground Clamp, Clamping Range: 1/2 to 1 in, #10 to 2 AWG Wire, Bronze
|
|
|
|
|
|
|
|
|
Bolted water pipe grounding clamp. UL listed. Made of corrosion-resistant copper alloy.
|
Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid to 2 stranded. UL listed.
|
Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Conductor range from #10 (5.5 sq-mm) to #2 (25 sq-mm). UL listed.
|
|
|
|
nVent ERICO EK16 Parallel Ground Clamp, Clamping Range: 1/2 to 1 in, #10 to 2 AWG Wire, Bronze
|
|
Halex 36019 Ground Clamp, Clamping Range: 1/2 to 1 in, 10 to 2 AWG Wire, Bronze, 1/BAG
|
|
Halex 36020 Ground Clamp, Clamping Range: 1-1/4 to 2 in, 10 to 2 AWG Wire, Bronze, 3.38 in W x 3.63 in H, Each
|
|
|
|
|
|
|
|
|
Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Conductor range from #10 (5.5 sq-mm) to #2 (25 sq-mm). UL listed.
|
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.
|
Wire size fits #10 to 2 AWG. Use to secure the grounding wire to a 1-1/4 to 2 in or 2-1/2 to 4 in pipe. Bronze. UL listed.
|
|
|
|
Halex 63299 Ground Screw, #10-32 Thread, Hex Drive, Steel, 100/BX
|
|
nVent ERICO 811260UPC Grounding Rod, 1/2 in Dia Nominal, 6 ft L, Steel, Galvanized
|
|
Gardner Bender GGP-1261 Grounding Pigtail, 12 AWG Wire, Copper, Green
|
|
|
|
|
|
|
|
|
Indoor or outdoor applications. Use to ground a wiring device to a steel outlet box. Green color.
|
Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel.
|
Convenient grounding accessories include products suitable for most job requirements.
|
|
|
|
nVent ERICO 815860UPC Grounding Rod, 5/8 in Dia Nominal, 6 ft L, Steel, Galvanized
|
|
nVent ERICO 615840UPC Grounding Rod, 5/8 in Dia Nominal, 4 ft L, Steel
|
|
nVent ERICO 815880UPC Grounding Rod, 5/8 in Dia Nominal, 8 ft L, Steel, Galvanized
|
|
|
|
|
|
|
|
|
Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel.
|
Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and ANSI/NEMA GR-1.
|
Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel.
|
|
|
|
nVent ERICO CWP2J Pipe Clamp, Clamping Range: 1/4 to 1 in, #10 to 2 AWG Wire, Silicone Bronze
|
|
nVent ERICO IBTB Intersystem Bonding Termination Bar, Polymer
|
|
nVent ERICO 615880A Ground Rod, 5/8 in Dia Nominal, 8 ft L, Copper-Bonded Steel
|
|
|
|
|
|
|
|
|
Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid to 2 stranded. UL listed.
|
The Intersystem Bonding Termination (IBTB), part of the Vent nVent ERICO line of facility electrical protection products, is designed to meet the requirements of the 2008 NEC? Article 250.94 bonding for other systems. The IBTB is mounted adjacent to the meter base or service entrance equipment and is a convenient way to interconnect and terminate grounding conductors from telephone, CATV or radio and television antennas. The IBTB includes corrosion-resistant, stainless steel mounting hardware and is easily accessible for connection and inspection. The lay-in connection clamp (#6 to #2 AWG or 16 to 35 sq-mm) allows easy installation of the grounding electrode conductor in one continuous length, where possible. The polymeric base and housing is impact-resistant, UV-stabilized and meets UL? requirements for weatherability performance.
|
nVent ERICO Ground Rod, Copper-Bonded Steel, Nominal Diameter: 5/8 in, 8 ft L, 80,000 lbf/sq-in Tensile Strength, Additional Information: 10 mil THK Plating
|
|
|
|
nVent ERICO 615800UPC Grounding Rod, 5/8 in Dia Nominal, 10 ft L, Steel
|
|
Southwire 65181440 Grounding Pigtail with Screws, 14 to 12 AWG Wire, Green
|
|
Halex 16010B Ground Clamp, Clamping Range: 1/2 to 1 in, 10 to 2 AWG Wire, Zinc, 25/BX
|
|
|
|
|
|
|
|
|
Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and ANSI/NEMA GR-1.
|
Southwire Grounding Pigtail with Screws, Wire Size: 14 to 12 AWG, Green, Dimensions: 8 in L, Includes: 10/32 Grounding Screw with Combination Head
|
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.
|
|
|
|
1/2-5/8IN BRONZE GROUND CLAMP - Case of 50
|
|
|
|
|
Suggested Retail: $199.99
|
|
|
|
|
Connects grounding wire to the grounding rod. UL and CSA listed for 1/2 in and 5/8 in ground rods and number 4 rebar and accept a conductor range from number 10 solid to number 2 stranded.
|
|
|
