|
Plumb Pak PP835-52 Flanged Spud Washer
|
|
ProSource 24370 Toilet Tank and Bowl Washer, Rubber, Black, Black
|
|
Plumb Pak PP835-53 Toilet Tank Bowl Washer, 2-1/4 in ID x 3-5/16 in OD Dia, Sponge Rubber
|
|
|
|
|
|
|
|
|
Flanged spud washer. 2 in.
|
This washer is an easy to install long-lasting washer that provides a watertight seal to help stop leaking between toilet tank and bowl. The diameters are 3-5/16 in L x 2-1/4 in W.
|
3-5/16 x 2-1/4 x 13/16 in.
|
|
|
|
Danco 80801 Spud Gasket, Rubber
|
|
Danco 80867 Flush Valve Spud Gasket, 2-3/8 in ID x 3-1/4 in OD Dia, Rubber, Black, For: American Standard Toilets
|
|
Plumb Pak PP835-84 Toilet Tank-to-Bowl Gasket, Sponge Rubber, For: American Standard Models
|
|
|
|
|
|
|
|
|
Repair your leaky toilet with the Danco spud gasket. The spud gasket fits inside the toilet on the base where the tank drains into the toilet bowl, forming a seal to hold the water in the tank. Replacing a worn out gasket will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.
|
Repair your leaky toilet with the Danco spud gasket for American Standard toilets. The spud gasket fits inside the toilet on the base where the tank drains into the toilet bowl, forming a seal to hold the water in the tank. Replacing a worn out gasket will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.
|
Plumb Pak Toilet Tank-to-Bowl Gasket, Sponge Rubber, Suitable for: American Standard Models
|
|
|
|
Danco 80955 Flush Valve Gasket, Rubber
|
|
Korky 463BP Tank-to-Bowl Gasket, 2-1/8 in ID x 3-1/2 in OD Dia, Sponge Rubber, Red, For: 2 in 2-Piece Toilet Tanks
|
|
Danco 80864 Tank-To-Bowl Spud Gasket, 2-1/16 in ID x 3-1/8 in OD Dia, Rubber, Black, For: Gerber Toilets
|
|
|
|
|
|
|
|
|
Repairing your worn out flush valve parts can save water and money. This repair kit will replace parts for most American Standard toilets. These parts are made of durable rubber to provide reliable performance.
|
The 2 in tank to bowl gasket is universal to fit most 2 in two-piece toilet tanks. The universal sponge rubber design measures 2-1/8 in ID, 3-1/2 in OD and 1-1/4 in THK. Easy-to-install, the 463 toilet parts.
|
Repair your leaky toilet with the Danco spud gasket for Gerber toilets. The spud gasket fits inside the toilet on the base where the tank drains into the toilet bowl, forming a seal to hold the water in the tank. Replacing a worn out gasket will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.
|
|
|
|
Keeney K832-3 Tank-to-Bowl Gasket, 3-1/4 in ID x 4-1/2 in OD Dia, Sponge Rubber, Gray, For: 3 in Toilet Flush Valves
|
|
Danco 88912 Tank-To-Bowl Spud Gasket, Rubber, For: Mansfield Toilets
|
|
ProSource TW0917 Tank-to-Bowl Connector Kit, 3-Piece, Rubber/Steel, Polished Brass
|
|
|
|
|
|
|
|
|
Fits most 3 in toilet flush valves.
|
Repair your leaky toilet with the Danco spud gasket for Mansfield toilets. The spud gasket fits inside the toilet on the base where the tank drains into the toilet bowl, forming a seal to hold the water in the tank. Replacing a worn out gasket will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.
|
The tank-to-bowl connector kit has 5/16 in x 3-1/8 in polished brass finish closet bolts and the washer is made of rubber.
|
|
|
|
Plumb Pak PP23522 Toilet Tank-to-Bowl Kit, Includes: 5/16-18 x 3 in Tank Bolts, Nuts
|
|
Danco 88913 Toilet Tank-to-Bowl Kit, Brass/Rubber/Steel, White
|
|
Plumb Pak PP835-22 Universal Toilet Tank-to-Bowl Kit
|
|
|
|
|
|
|
|
|
Includes 5/16-18 x 3 in tank bolts, nuts, washer and tank-to-bowl washer.
|
The Tank-to-bowl Kit for Mansfield is an economical solution for a leaky toilet tank. The kit includes a rubber gasket, bolts, washers and nuts required for assembly. The kit works with Mansfield's Alto toilets with 2 in flush valves as well as many other models with a 2 in flush valve.
|
Includes 5/16-18 x 3 in tank bolts, nuts, washer and tank-to-bowl washer.
|
|
|
|
Fluidmaster 6102 Tank-to-Bowl Gasket Kit, Sponge Rubber
|
|
Danco 88191 Tank-to-Bowl Toilet Repair Kit, Rubber/Steel, For: American Standard/Plebe Models
|
|
Plumb Pak PP835-183L Tank-to-Bowl Kit
|
|
|
|
|
|
|
|
|
This gasket seals the toilet tank to the bowl. Fluidmaster? bolts, screws and gaskets are what you need to install or repair a rocking toilet. All bolts are made from solid brass and all gaskets are made from high-quality rubber.
|
Replace worn tank-to-bowl bolts and gaskets with this Danco kit, it is complete and ready to go. It includes durable tank bolts, rubber spud gasket and washers. Installing new parts will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.
|
Includes all nuts and washers. 5/16 -18 x 3 in.
|
|
|
|
Korky 464BP Tank-to-Bowl Gasket, 2-1/8 in ID x 3-1/2 in OD Dia, Sponge Rubber, Red, For: 2 in 2-Piece Toilet Tanks
|
|
Danco 80378 Toilet Tank-to-Bowl Kit, Steel, For: Any Toilet Brand
|
|
Plumb Pak PP830-34 Tank-to-Bowl Assembly Kit, Includes: Gasket and Bolt Set
|
|
|
|
|
|
|
|
|
The 2 in tank to bowl gasket and hardware kit is universal to fit most 2 in 2-Piece toilet tanks. This toilet tank part uses universal sponge rubber design measures 2-1/8 in ID, 3-1/2 in OD and 1-1/4 in thick.
|
Replace worn tank-to-bowl bolts and gaskets with this Danco kit, it is complete and ready to go. It includes durable tank bolts, a sponge rubber spud gasket and a round shaped gasket. Installing new parts will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.
|
Assembly kit with gasket. Carded.
|
|
|
|
Plumb Pak PP830-47 Tank-to-Bowl Assembly Kit
|
|
Korky 480BP Tank-to-Bowl Gasket, 3 in ID x 4-1/4 in OD Dia, Sponge Rubber, Red
|
|
Danco 10460 Toilet Tank-to-Bowl Kit, 15-Piece, Steel
|
|
|
|
|
|
|
|
|
Assembly kit with gasket. Carded.
|
The large 3 in and 4 in tank to bowl gasket is designed to fit specific toilet models that were made after 2000. The universal sponge rubber design measures:,3 in inner diameter, 4-1/4 in OD and 1-1/8 in thick.
|
Help prevent leaks from occurring between your toilet tank and bowl with this tank-to-bowl kit. This 15-piece kit includes 2 brass-plated galvanized steel bolts, a rubber gasket and washers. Stopping the leak saves water, energy and money.
|
|
|
|
Danco 10572 Tank-to-Bowl Toilet Repair Kit, Rubber
|
|
Harvey 72034-12 Tank-to-Bowl Gasket Kit, Rubber
|
|
Korky 481BP Tank-to-Bowl Gasket, 3 in ID x 4-1/4 in OD Dia, Sponge Rubber, Red, For: 3 in 2-Piece Toilet Tanks
|
|
|
|
|
|
|
|
|
Replace worn tank-to-bowl bolts and gaskets with this Danco kit, it is complete and ready to go. It includes durable tank bolts, rubber spud gasket and washers. Installing new parts will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.
|
Harvey? specialty non-wax gaskets are flexible toilet seal gaskets designed to fit 3 in and 4 in waste lines.
|
The Large 3 in and 4 in tank to bowl gasket and hardware kit is designed to fit specific toilet models that were made after 2000. The universal sponge rubber design measures 3 in inner diameter, 4-1/4 in OD and 1-1/8 in thick. The included hardware is stainless steel to ensure a long, corrosion-resistant life.
|
|
|
|
Danco 88359 Toilet Tank-to-Bowl Kit, Brass, Black, For: Eljer Toilets
|
|
Danco 88193 Tank-to-Bowl Kit, Steel, For: Gerber Toilets
|
|
Fluidmaster 6106 Toilet Tank-to-Bowl Gasket, Brass/Sponge Rubber
|
|
|
|
|
|
|
|
|
Replace worn tank-to-bowl bolts and gaskets with this Danco kit, it is complete and ready to go. It includes durable tank bolts and a sponge rubber spud gasket. Installing new parts will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.
|
Replace worn tank-to-bowl bolts and gaskets with this Danco kit, it is complete and ready to go. It includes durable tank bolts and a sponge rubber spud gasket. Installing new parts will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.
|
This secures and seals the toilet tank to the bowl. Fluidmaster? bolts, screws and gaskets are what you need to install or repair a rocking toilet. All bolts are made from solid brass and all gaskets are made from high-quality rubber.
|
|
|
