PVC FITTINGS - ELBOWS

Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE FITTINGS > PVC - PRESSURE FITTINGS > PVC FITTINGS - ELBOWS

Sort By:

1 2

IPEX 435519 Pipe Elbow, 1/2 in, Socket, 90 deg Angle, PVC, SCH 40 Schedule

IPEX 435520 Pipe Elbow, 3/4 in, Socket, 90 deg Angle, PVC, SCH 40 Schedule

IPEX 435481 Pipe Elbow, 1/2 in, Socket, 45 deg Angle, PVC, White, SCH 40 Schedule, 150 psi Pressure

Suggested Retail: $0.69

Suggested Retail: $0.79

Suggested Retail: $1.39

IPEX Pipe Elbow, Nominal Size: 1/2 in, Socket Connection, Angle: 90 deg, Schedule Rating: SCH 40, PVC IPEX Pipe Elbow, 3/4 in Nominal, Socket Connection, 90 deg Angle, SCH 40 Schedule, PVC The 45 deg elbow is used to change direction in a pipe run by 45 deg. The socket end solvent welds to a pipe or spigot end of a fitting.

IPEX 435506 Pipe Elbow, 1/2 in, Socket x FPT, 90 deg Angle, PVC, White, SCH 40 Schedule, 150 psi Pressure

IPEX 435515 Reducing Pipe Elbow, 3/4 x 1/2 in, Socket x FPT, 90 deg Angle, PVC, White, SCH 40 Schedule, 150 psi Pressure

IPEX 435482 Pipe Elbow, 3/4 in, Socket, 45 deg Angle, PVC, SCH 40 Schedule

Suggested Retail: $1.39

Suggested Retail: $1.49

Used to change direction in a pipe run by 90 deg. The socket end solvent welds to a pipe or spigot end of a fitting while the FPT end fits into an MPT fitting. Used to change direction in a pipe run by 90 deg. The socket end fits onto the pipe end and the FPT end fits a smaller size MPT fitting. IPEX Pipe Elbow, 3/4 in Nominal, Socket Connection, 45 deg Angle, SCH 40 Schedule, PVC

IPEX 435521 Pipe Elbow, 1 in, Socket, 90 deg Angle, PVC, SCH 40 Schedule

IPEX 435483 Pipe Elbow, 1 in, Socket, 45 deg Angle, PVC, SCH 40 Schedule

IPEX 435507 Pipe Elbow, 3/4 in, Socket x FPT, 90 deg Angle, PVC, White, SCH 40 Schedule, 150 psi Pressure

Suggested Retail: $1.49

Suggested Retail: $1.69

IPEX Pipe Elbow, 1 in Nominal, Socket Connection, 90 deg Angle, SCH 40 Schedule, PVC IPEX Pipe Elbow, 1 in Nominal, Socket Connection, 45 deg Angle, SCH 40 Schedule, PVC Used to change direction in a pipe run by 90 deg. The socket end solvent welds to a pipe or spigot end of a fitting while the FPT end fits into an MPT fitting.

IPEX 435500 Pipe Elbow, 1/2 x 1/2 in, Slip x MPT, 90 deg Angle, PVC, White, SCH 40 Schedule, 600 psi Pressure

IPEX 435538 Pipe Elbow, 1/2 in, FPT, 90 deg Angle, PVC, White, SCH 40 Schedule, 150 psi Pressure

IPEX 435501 Street Pipe Elbow, 3/4 x 3/4 in, Slip x MPT, 90 deg Angle, PVC, White, SCH 40 Schedule

Suggested Retail: $1.69

Suggested Retail: $1.79

Suggested Retail: $1.99

IPEX Pipe Elbow, 1/2 x 1/2 in Nominal, Slip x MPT Connection, 90 deg Angle, 600 psi Pressure, 140 deg F Operating, SCH 40 Schedule, PVC, White Used to change direction in a pipe run by 90 deg. Female threaded (FPT) ends fit into MPT fittings at each end. IPEX Street Pipe Elbow, 3/4 x 3/4 in Nominal, Slip x MPT Connection, 90 deg Angle, 480 psi Pressure, 140 deg F Operating, SCH 40 Schedule, PVC, White

IPEX 435535 Reducing Pipe Elbow, 3/4 x 1/2 in, Slip x Slip, 90 deg Angle, PVC, White, SCH 40 Schedule

IPEX 435544 Street Pipe Elbow, 1/2 in, Spigot x Socket, 90 deg Angle, PVC, White, SCH 40 Schedule, 150 psi Pressure

IPEX 435553 Street Pipe Elbow, 3/4 x 3/4 in, MPT x FPT, 90 deg Angle, PVC, White, SCH 40 Schedule

Suggested Retail: $1.99

IPEX Reducing Pipe Elbow, 3/4 x 1/2 in Nominal, Slip x Slip Connection, 90 deg Angle, 480 psi Pressure, 140 deg F Operating, SCH 40 Schedule, PVC, White Also referred to as a street elbow, this is used to connect solvent weld pipe to a solvent weld fitting hub at a 90 deg angle. IPEX Street Pipe Elbow, 3/4 x 3/4 in Nominal, MPT x FPT Connection, 90 deg Angle, 480 psi Pressure, 140 deg F Operating, SCH 40 Schedule, PVC, White

IPEX 435539 Pipe Elbow, 3/4 in, FPT, 90 deg Angle, PVC, White, SCH 40 Schedule, 150 psi Pressure

IPEX 435552 Street Pipe Elbow, 1/2 x 1/2 in, MPT x FPT, 90 deg Angle, PVC, White, SCH 40 Schedule

IPEX 435522 Pipe Elbow, 1-1/4 in, Socket, 90 deg Angle, PVC, SCH 40 Schedule

Suggested Retail: $1.99

Suggested Retail: $2.59

Used to change direction in a pipe run by 90 deg. Female threaded (FPT) ends fit into MPT fittings at each end. IPEX Street Pipe Elbow, 1/2 x 1/2 in Nominal, MPT x FPT Connection, 90 deg Angle, 600 psi Pressure, 140 deg F Operating, SCH 40 Schedule, PVC, White IPEX Pipe Elbow, 1-1/4 in Nominal, Socket Connection, 90 deg Angle, SCH 40 Schedule, PVC

IPEX 435508 Pipe Elbow, 1 in, Socket x FPT, 90 deg Angle, PVC, White, SCH 40 Schedule, 150 psi Pressure

IPEX 435536 Reducing Pipe Elbow, 1 x 1/2 in, Slip x Slip, 90 deg Angle, PVC, White, SCH 40 Schedule

IPEX 435978 Reducing Pipe Elbow, 1 x 3/4 in, Slip x Slip, 90 deg Angle, PVC, White, SCH 40 Schedule

Suggested Retail: $2.59

Used to change direction in a pipe run by 90 deg. The socket end solvent welds to a pipe or spigot end of a fitting while the FPT end fits into an MPT fitting. IPEX Reducing Pipe Elbow, 1 x 1/2 in Nominal, Slip x Slip Connection, 90 deg Angle, 450 psi Pressure, 140 deg F Operating, SCH 40 Schedule, PVC, White IPEX Reducing Pipe Elbow, 1 x 3/4 in Nominal, Slip x Slip Connection, 90 deg Angle, 450 psi Pressure, 140 deg F Operating, SCH 40 Schedule, PVC, White

IPEX 435484 Pipe Elbow, 1-1/4 in, Socket, 45 deg Angle, PVC, White, SCH 40 Schedule, 150 psi Pressure

IPEX 035502 Street Elbow, 1 in, Socket x MNPT, 90 deg Angle, PVC, White, SCH 40 Schedule, 450 psi Pressure

IPEX 435517 Pipe Elbow, 1 x 3/4 in, Slip x MPT, 90 deg Angle, PVC, White, SCH 40 Schedule, 450 psi Pressure

Suggested Retail: $2.79

The 45 deg elbow is used to change direction in a pipe run by 45 deg. The socket end solvent welds to a pipe or spigot end of a fitting. PVC is a complete piping system with PVC SCH 40 and SCH 80 pipe that provides exceptional performance in demanding industrial projects where corrosion-resistance is a key requirement. IPEX high-performance vinyl systems with PVC SCH 40 pipe and SCH 80 pipe are designed to meet the temperature, pressure and size requirements of piping systems that are used in chemical processes and other industrial applications. IPEX Pipe Elbow, 1 x 3/4 in Nominal, Slip x MPT Connection, 90 deg Angle, 450 psi Pressure, 140 deg F Operating, SCH 40 Schedule, PVC, White

IPEX 435485 Pipe Elbow, 1-1/2 in, Socket, 45 deg Angle, PVC, SCH 40 Schedule

IPEX 435523 Pipe Elbow, 1-1/2 in, Socket, 90 deg Angle, PVC, SCH 40 Schedule

IPEX 235033 Side Outlet Elbow, 1/2 in, Socket x Socket x FNPT, PVC, White, SCH 40 Schedule, 600 psi Pressure

Suggested Retail: $2.99

IPEX Pipe Elbow, 1-1/2 in Nominal, Socket Connection, 45 deg Angle, SCH 40 Schedule, PVC IPEX Pipe Elbow, 1-1/2 in Nominal, Socket Connection, 90 deg Angle, SCH 40 Schedule, PVC PVC is a complete piping system with PVC SCH 40 and SCH 80 pipe that provides exceptional performance in demanding industrial projects where corrosion-resistance is a key requirement. IPEX high-performance vinyl systems with PVC SCH 40 pipe and SCH 80 pipe are designed to meet the temperature, pressure and size requirements of piping systems that are used in chemical processes and other industrial applications.

IPEX 435545 Street Pipe Elbow, 3/4 in, Spigot x Socket, 90 deg Angle, PVC, White, SCH 40 Schedule, 150 psi Pressure

IPEX 435540 Pipe Elbow, 1 in, FPT, 90 deg Angle, PVC, White, SCH 40 Schedule, 150 psi Pressure

IPEX 435510 Pipe Elbow, 1-1/2 in, Socket x FPT, 90 deg Angle, PVC, White, SCH 40 Schedule, 150 psi Pressure

Suggested Retail: $3.29

Suggested Retail: $3.79

Also referred to as a street elbow, this is used to connect solvent weld pipe to a solvent weld fitting hub at a 90 deg angle. Used to change direction in a pipe run by 90 deg. Female threaded (FPT) ends fit into MPT fittings at each end. Used to change direction in a pipe run by 90 deg. The socket end solvent welds to a pipe or spigot end of a fitting while the FPT end fits into an MPT fitting.


	1 2