|
Flair-It 16841 Tube to Pipe Adapter, 1/2 in, PEX x FPT, PEX-A, PEX-B, Polyoxymethylene, White
|
|
Flair-It 16842 Tube to Pipe Adapter, 1/2 in, PEX x MPT, PEX-A, PEX-B, Polyoxymethylene, White
|
|
Flair-It PEXLOCK 16800 Tube Elbow, 1/2 in, Compression, 90 deg Angle, PVC
|
|
|
|
|
|
|
|
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long term seal.
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long term seal.
|
For hot and cold water. 3/8 and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.
|
|
|
|
Flair-It 16870 Tube to Pipe Adapter, 3/8 x 1/2 in, PEX x MPT, PEX-A, PEX-B, Polyoxymethylene, White
|
|
Flair-It PEXLOCK 16855 Coupling, 3/8 in, Compression, PVC, 200 psi Pressure
|
|
Flair-It 26790 Tube Adapter, 3/4 in, PEX, PEX-A, PEX-B, Polyoxymethylene, Black/Gray
|
|
|
|
|
|
|
|
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long term seal.
|
|
|
|
Flair-It PEXLOCK 16840 Coupling, 1/2 in, Compression, PVC, 200 psi Pressure
|
|
Flair-It PEXLOCK 16803 Pipe Elbow, 1/2 in, MPT, 90 deg Angle
|
|
Flair-It 16872 Tube to Pipe Adapter, 3/4 in, PEX x MPT, Polyoxymethylene, White, 1/PK
|
|
|
|
|
|
|
|
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.
|
For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long term seal.
|
|
|
|
Flair-It PEXLOCK 16853 Reducing Coupling, 1/2 x 3/8 in, Compression, PVC, 200 psi Pressure
|
|
Flair-It 16848 Tube to Pipe Adapter, 3/4 in, PEX x MPT, PEX-A, PEX-B, Polyoxymethylene, White
|
|
Flair-It 16858 Tube to Pipe Adapter, 1/2 x 3/4 in, PEX x FPT, PEX-A, PEX-B, Polyoxymethylene, White
|
|
|
|
|
|
|
|
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long term seal.
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.
|
|
|
|
Flair-It PEXLOCK 16816 Pipe Elbow, 1/2 in, FPT, 90 deg Angle, PVC
|
|
Flair-It 16847 Tube to Pipe Adapter, 3/4 in, PEX x FPT, PEX-A, PEX-B, Polyoxymethylene, White
|
|
Flair-It PEXLOCK 16802 Pipe Elbow, 1/2 in, FPT, 90 deg Angle
|
|
|
|
|
|
|
|
|
For hot and cold water. 3/8 and 1/2 in fits PEX or polybutylene tubing only. Bar coded.
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long term seal.
|
Flair-It PEXLOCK Pipe Elbow, Nominal Size: 1/2 in, FPT Connection, Angle: 90 deg, Suitable for: PEX and Polybutylene Tubing
|
|
|
|
Flair-It PEXLOCK 16820 Tube Tee, 1/2 in, Compression, PEX-A, PEX-B, PVC, 200 psi Pressure
|
|
Flair-It 16873 Swivel Pipe Adapter, 1/2 in, PEX x FPT, PEX-A, PEX-B, Polyoxymethylene
|
|
Flair-It PEXLOCK 16845 Reducing Coupling, 3/4 x 1/2 in, Compression, PVC, 200 psi Pressure
|
|
|
|
|
|
|
|
|
For hot and cold water. 3/8 and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.
|
|
|
|
Flair-It PEXLOCK 16831 Tube Tee, 3/8 in, Compression, PEX-A, PEX-B, PVC, 200 psi Pressure
|
|
Flair-It 16846 Coupling, 3/4 in, Compression, For: PEX and Polybutylene Tubing
|
|
Flair-It PEXLOCK 16817 Pipe Elbow, 3/8 x 1/2 in, FPT, 90 deg Angle
|
|
|
|
|
|
|
|
|
For hot and cold water. 3/8 and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.
|
For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. Bar coded.
|
|
|
|
Flair-It PEXLOCK 16806 Tube Elbow, 3/4 in, Compression, 90 deg Angle, PVC
|
|
Flair-It 16865 Tube Adapter, 1/2 x 7/8 in, PEX x Ballcock, PEX-A, PEX-B, Polyoxymethylene, White
|
|
Flair-It 16844 Pipe Adapter, 3/4 in, PB x PEX, PEX-A, PEX-B, Polyoxymethylene
|
|
|
|
|
|
|
|
|
For hot and cold water. 3/8 and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long term seal.
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.
|
|
|
|
Flair-It PEXLOCK 16827 Tube Tee, 3/4 in, PEX, PEX-A, PEX-B, PVC
|
|
Flair-It PEXLOCK 16825 Reducing Tube Tee, 3/4 x 1/2 x 3/4 in, PEX-A, PEX-B
|
|
Flair-It PEXLOCK 16826 Reducing Tube Tee, 3/4 x 1/2 in, Compression, PEX-A, PEX-B, PVC, 200 psi Pressure
|
|
|
|
|
|
|
|
|
For hot and cold water. 3/8 and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.
|
For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.
|
For hot and cold water. 3/8 and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.
|
|
|
|
Flair-It PEXLOCK 16824 Reducing Tube Tee, 3/4 x 1/2 in, Compression, PEX-A, PEX-B, PVC, 200 psi Pressure
|
|
Flair-It PEXLOCK 16343 Coupling, 1/2 in, Compression, Copper, 200 psi Pressure
|
|
Flair-It PEXLOCK 16347 Coupling, 3/4 in, Compression, Plastic, 200 psi Pressure
|
|
|
|
|
|
|
|
|
For hot and cold water. 3/8 and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.
|
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.
|
|
|
