|
Anderson Metals 54840-06 Space Heater Tube Cap, 3/8 in, Flare
|
|
Anderson Metals 54800-06 Space Heater Tube Nut, 3/8 in, Brass
|
|
BrassCraft MAU1-10-8 Gas Adapter, 5/8 x 1/2 in, Flare x FIP, 1.66 in L, 5/8 in OD
|
|
|
|
|
|
|
|
|
9/16 in to 24 fine thread flare end for space heaters. Bagged with flag tag.
|
Anderson Metals Space Heater Tube Nut, Nominal Size: 3/8 in, 1000 psi, Temperature Rating: 73 deg F, Brass
|
Fitting for 5/8 in OD tube (brass). New style 15/16-16 thread. AGA design certified.
|
|
|
|
Anderson Metals 54806-0608 Pipe Coupler, 3/8 x 1/2 in, Flare x FIP, Brass
|
|
Anderson Metals 54808-0606 Half Pipe Union, 3/8 in
|
|
BrassCraft MAU2-10-8 Gas Adapter, 5/8 x 1/2 in, Flare x MIP, 2 in L, 5/8 in OD
|
|
|
|
|
|
|
|
|
Two-pieces construction, nut and body. Use with copper, brass, aluminum or steel tubing. -65 to 250 deg F temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration and vacuum. UPC individually bagged.
|
9/16 in to 24 fine thread flare end for space heaters. Bagged with flag tag.
|
Fitting for 5/8 in OD tube (brass). New style 15/16-16 thread. AGA design certified.
|
|
|
|
Anderson Metals 54806-0606 Pipe Coupler, 3/8 in, Flare x FIP, Brass
|
|
Anderson Metals 54808-0608 Half Pipe Union, 3/8 x 1/2 in
|
|
BrassCraft 293M Series FRC11-6 Flare Male Adapter, 3/8 in, OD Tube x MIP, Brass, Rough
|
|
|
|
|
|
|
|
|
Two-pieces construction, nut and body. Use with copper, brass, aluminum or steel tubing. -65 to 250 deg F temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration and vacuum. UPC individually bagged.
|
9/16 in to 24 fine thread flare end for space heaters. Bagged with flag tag.
|
For use with F0-6 (9/16-24) flare nut IBM # 9166414.
|
|
|
|
BrassCraft FU3-6 Flare Union, 3/8 in, Flare, 1-3/32 in L, 3/8 in OD
|
|
BrassCraft PSSL-14 Adapter, 3/8 in, Flare x MIP, Brass
|
|
BrassCraft PSCFT-10 Flare Adaptor, 3/8 in, Flare x MIP, Brass, Chromate-Coated
|
|
|
|
|
|
|
|
|
For use with F0-6 (9/16-24) flare nut IBM # 9166414.
|
For 1/4 in ID (3/8 in OD) corrugated tube. For gas clothes dryer connections. Tapped 1/8 in female pipe thread. Dimension of 5-1/2 in L x 3.8 in W x 0.6 in D.
|
BrassCraft Flare Adaptor, Nominal Size: 3/8 in, Flare x MIP Connection, Brass, Chromate-Coated, Yellow
|
|
|
|
BrassCraft MAU1-10-12 Gas Adapter, 5/8 x 3/4 in, Flare x FIP, 1-25/32 in L, 5/8 in OD
|
|
BrassCraft MAU2-10-12 Gas Adapter, 5/8 x 3/4 in, Flare x MIP, 2-1/16 in L, 5/8 in OD
|
|
SharkBite 65709B Gas Connector, 5/8 x 1/2 in, Flare x FIP, Steel, Zinc, 1-1/2 in L
|
|
|
|
|
|
|
|
|
Fitting for 5/8 in OD tube (brass). New style 15/16-16 thread. AGA design certified.
|
Fitting for 5/8 in OD tube (brass). New style 15/16-16 thread. A.G.A. design certified.
|
SharkBite Gas Connector, Nominal Size: 5/8 x 1/2 in, Flare x FIP Connection, Steel, Zinc, 1-1/2 in L
|
|
|
|
Eastman 65728B Gas Adapter, 1/2 in, Flare x FIP, Steel, Zinc-Plated
|
|
BrassCraft PSSL-15 Pipe Union, 3/8 x 1/2 in, Flare x FIP, Stainless Steel
|
|
BrassCraft PSSL-16 Gas Supply Union, 3/8 x 1/2 in, Flare x MIP, Stainless Steel
|
|
|
|
|
|
|
|
|
Eastman Gas Adapter, Nominal Size: 1/2 in, Flare x FIP Connection, Steel, Zinc-Plated
|
For 1/4 in ID (3/8 in OD) corrugated tube. Recommended for gas clothes dryer connections. Use with PlumbShop SL or RSL Series connectors.
|
For 1/4 in ID (3/8 in OD) corrugated tube. Recommended for gas clothes dryer connections. Use with SL or RSL Series connectors. Tapped 3/8 in female pipe thread.
|
|
|
|
BrassCraft PSSC-62 Gas Supply Adapter, 5/8 x 1/2 in, Flare x FIP, Stainless Steel
|
|
BrassCraft 2294M Series FRC13-6-8 Adapter, 3/8 x 1/2 in, Flare x MIP, Rough
|
|
BrassCraft 294F Series F12-6-8 Adapter, 3/8 x 1/2 in, Flare x FIP, Rough, 3/8 in OD
|
|
|
|
|
|
|
|
|
For corrugated tube. Recommended for gas range connections.
|
The flare reducing male adapter is highly dependable and an economical choice of fitting for refrigeration, compression, heating and air and other industrial markets. This all-brass fitting features a vibration-resistant construction. It resists mechanical pullout and is designed for high pressure service.
|
For use with F0-6 (9/16-24) flare nut IBM # 9166414.
|
|
|
|
Eastman 65708B Gas Adapter, 3/8 in, Flare x MIP, Brass, Zinc-Plated
|
|
Eastman 62730B Gas Adapter, 5/8 x 1/2 in, Flare x MIP
|
|
Eastman 65704B Gas Adapter, 1/2 in, Flare x MIP, Steel, Zinc-Plated
|
|
|
|
|
|
|
|
|
Eastman Gas Adapter, Nominal Size: 3/8 in, Flare x MIP Connection, Brass, Zinc-Plated
|
Eastman Gas Adapter, Nominal Size: 5/8 x 1/2 in, Flare x MIP Connection
|
Eastman Gas Adapter, Nominal Size: 1/2 in, Flare x MIP Connection, Steel, Zinc-Plated
|
|
|
|
Anderson Metals 54746-1508 Pipe Coupler, 15/16 x 1/2 in, Flare x FIP, Brass
|
|
Anderson Metals 54748-1508 Pipe Coupling, 15/16 x 1/2 in
|
|
BrassCraft PSSC-66 Adapter, 5/8 x 3/4 in, Flare x FIP, Stainless Steel
|
|
|
|
|
|
|
|
|
Two-pieces construction, nut and body. Use with copper, brass, aluminum or steel tubing. -65 to 250 deg F temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration and vacuum. UPC individually bagged.
|
15/16-16 thread for brass range connectors. UPC individually bagged.
|
For corrugated tube. Recommended for gas range connections.
|
|
|
|
BrassCraft M40-10 Gas Tube Cap, 5/8 in, Flare, 0.697 in L
|
|
Eastman 62731B Gas Adapter, 5/8 x 3/4 in, Flare x MIP
|
|
BrassCraft PSSC-64 Half Union, 5/8 x 3/4 in, Flare x MIP, Steel
|
|
|
|
|
|
|
|
|
BrassCraft's 5/8 in OD (15/16-16 thread) flare cap is machined from solid brass bar stock for a seamless, durable design. It is used to securely cap off a male flare outlet gas ball valve. Can be used in LP and natural gas installations. Intended for use in residential gas installations with internal pressures ratings up to 1/2 psi maximum.
|
Eastman Gas Adapter, Nominal Size: 5/8 x 3/4 in, Flare x MIP Connection
|
For 1/2 in ID (5/8 in OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2 in MIP end tapped 3/8 in FIP thread, 3/4 in MIP tapped 1/2 in FIP.
|
|
|
