|
Anderson Metals 756108-02 Pipe Cap, 1/8 in, FIP, Brass, Yellow, 1000 psi Pressure
|
|
Anderson Metals 756108-04 Pipe Cap, 1/4 in, FIP, Brass, Yellow, 1000 psi Pressure
|
|
Anderson Metals 738108-04 Pipe Cap, 1/4 in, IPT, Brass, Red, 200 psi Pressure
|
|
|
|
|
|
|
|
|
One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.
|
One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.
|
one-piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads". Fair vibration resistance. Used in low to medium pressure applications. Teflon? tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.
|
|
|
|
Anderson Metals 738108-02 Pipe Cap, 1/8 in, IPT, Brass, Red, 200 psi Pressure
|
|
Anderson Metals 738108-06 Pipe Cap, 3/8 in, IPT, Brass, Red, 200 psi Pressure
|
|
Anderson Metals 756108-06 Pipe Cap, 3/8 in, FIP, Brass, Yellow, 1000 psi Pressure
|
|
|
|
|
|
|
|
|
one-piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads". Fair vibration resistance. Used in low to medium pressure applications. Teflon? tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.
|
One piece construction. Use with brass or steel pipe. All pipe threads are American standard taper pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
|
One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.
|
|
|
|
Anderson Metals 738108-08 Pipe Cap, 1/2 in, IPT, Brass, Red, 200 psi Pressure
|
|
Anderson Metals 738108-12 Pipe Cap, 3/4 in, IPT, Brass, Red, 200 psi Pressure
|
|
Anderson Metals 738108-16 Pipe Cap, 1 in, IPT, Brass, Red, 200 psi Pressure
|
|
|
|
|
|
|
|
|
one-piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads". Fair vibration resistance. Used in low to medium pressure applications. Teflon? tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.
|
One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.
|
One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.
|
|
|
|
Anderson Metals 738108-20 Pipe Cap, 1-1/4 in, IPT, Brass, Red
|
|
Anderson Metals 738108-32 Pipe Cap, 2 in, IPT, Brass, Red
|
|
|
|
|
|
|
|
|
One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.
|
One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.
|
|
|
