|
Oatey Knock-Out 39100 Test Cap with Barcode, 1-1/2 in Connection, ABS, White
|
|
Oatey Knock-Out 39101 Test Cap with Barcode, 2 in Connection, ABS, White
|
|
Oatey Knock-Out 39102 Test Cap with Barcode, 3 in Connection, ABS, White
|
|
|
|
|
|
|
|
|
Oatey? Knock-Out? test caps are a solvent weld test cap designed for use on SCH 40 ABS or PVC DWV piping for testing up to 17 psi or 40 head pressure. Knock-Out? Test Caps deep design provides strong, leak-free connection, while "tab" feature keeps hands-free from solvent cement. Knock-Out? center of test cap can be removed with "tab" to prevent possible blockage in piping.
|
Oatey? Knock-Out? test caps are a solvent weld test cap designed for use on SCH 40 ABS or PVC DWV piping for testing up to 17 psi or 40 head pressure. Knock-Out? Test Caps deep design provides strong, leak-free connection, while "tab" feature keeps hands-free from solvent cement. Knock-Out? center of test cap can be removed with "tab" to prevent possible blockage in piping.
|
Oatey? Knock-Out? test caps are a solvent weld test cap designed for use on SCH 40 ABS or PVC DWV piping for testing up to 17 psi or 40 head pressure. Knock-Out? Test Caps deep design provides strong, leak-free connection, while "tab" feature keeps hands-free from solvent cement. Knock-Out? center of test cap can be removed with "tab" to prevent possible blockage in piping.
|
|
|
|
Oatey Knock-Out 39103 Test Cap with Barcode, 4 in Connection, ABS, White
|
|
ProSource TC-15 Test Cap, 1-1/2 in Connection, Capping Pipe Ends, PVC, Black, 1-1/2 in Pipe
|
|
ProSource TC-2 Test Cap, 2 in Connection, Capping Pipe Ends, PVC, Black, 2 in Pipe
|
|
|
|
|
|
|
|
|
Oatey? Knock-Out? test caps are a solvent weld test cap designed for use on SCH 40 ABS or PVC DWV piping for testing up to 17 psi or 40 head pressure. Knock-Out? Test Caps deep design provides strong, leak-free connection, while "tab" feature keeps hands-free from solvent cement. Knock-Out? center of test cap can be removed with "tab" to prevent possible blockage in piping.
|
This ProSource test cap is used for capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems.
|
This ProSource test cap is used for capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems.
|
|
|
|
Fernco QC-101 Pipe Cap, 1-1/2 in, Slip-Joint, PVC Body, 4.3 psi Pressure
|
|
Fernco QC-102 Pipe Cap, 2 in, Slip-Joint, PVC Body, 4.3 psi Pressure
|
|
ProSource TC-3 Test Cap, 3 in Connection, Capping Pipe Ends, PVC, Black, 3 in Pipe
|
|
|
|
|
|
|
|
|
Qwik Caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs. Made of flexible PVC, they are suitable for above ground or underground use. To install, simply place over open end of pipe and tighten to 60 in-lb of torque, always remember to hand tighten when installing on corrugated pipe.
|
Qwik Caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs. Made of flexible PVC, they are suitable for above ground or underground use. To install, simply place over open end of pipe and tighten to 60 in-lb of torque, always remember to hand tighten when installing on corrugated pipe.
|
This ProSource test cap is used for capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems.
|
|
|
|
Fernco QC-103 Pipe Cap, 3 in, Slip-Joint, PVC Body, 4.3 psi Pressure
|
|
ProSource TC-4 Test Cap, 4 in Connection, Capping Pipe Ends, PVC, Black, 4 in Pipe
|
|
Fernco QC-104 Pipe Cap, 4 in, PVC Body, 4.3 psi Pressure
|
|
|
|
|
|
|
|
|
Qwik Caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs. Made of flexible PVC, they are suitable for above ground or underground use. To install, simply place over open end of pipe and tighten to 60 in-lb of torque, always remember to hand tighten when installing on corrugated pipe.
|
This ProSource test cap is used for capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems.
|
Qwik Caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs. Made of flexible PVC, they are suitable for above ground or underground use. To install, simply place over open end of pipe and tighten to 60 in-lb of torque, always remember to hand tighten when installing on corrugated pipe.
|
|
|
|
Oatey 33400 Test Plug, 1-1/2 in Connection, Plastic, Red
|
|
Oatey 33401 Test Plug, 2 in Connection, Plastic, Red
|
|
Oatey 33402 Test Plug, 3 in Connection, Plastic, Red
|
|
|
|
|
|
|
|
|
Plastic mechanical plug designed to hold higher pressures. Used for plugging open ended piping as protection from dirt, dust or debris. Maximum allowed air is 5 psig.
|
Plastic mechanical plug designed to hold higher pressures. Used for plugging open ended piping as protection from dirt, dust or debris. Maximum allowed air is 5 psig.
|
Plastic mechanical plug designed to hold higher pressures. Used for plugging open ended piping as protection from dirt, dust or debris. Maximum allowed air is 5 psig.
|
|
|
|
Oatey 33403 Test Plug, 4 in Connection, Plastic, Red
|
|
|
|
|
|
|
|
|
Plastic mechanical plug designed to hold higher pressures. Used for plugging open ended piping as protection from dirt, dust or debris. Maximum allowed air is 5 psig.
|
|
|
