|
Danco 65884B Supply Line Washer, Rubber, Black
|
|
Danco 88493 Supply Line Washer, Rubber, Black
|
|
Camco USA 11061 Flare Dip Tube with Gasket, PEX
|
|
|
|
|
|
|
|
|
Designed to be used with a 3/4 in Dia supply connector to seal the connection. Size of 13/16 x 1 in.
|
Water heater supply line washer.
|
The Camco USA flared dip tube is a non-metallic tube that directs incoming cold water to the bottom of the tank and can be cut to length.
|
|
|
|
Camco USA 10862 Bilingual Run-Off Tube, Thermoplastic Polypropylene
|
|
Camco USA 10623 Dielectric Nipple, 3/4 in, NPT, Plastic, 2-1/2 in L
|
|
Camco USA 11523 Water Heater Drain Valve, Plastic
|
|
|
|
|
|
|
|
|
The Camco USA side mount run-off tube carries water steams safely to the drain pan or drain, if T and P valve activates. Thermoplastic polypropylene run-off tubes present a rigid surface for gripping with standard wrenches and can be cut to length.
|
The 2-1/2 in dielectric nipple is designed for use in water heater inlet and outlet hook-ups and for other uses where dissimilar metals occur in piping and plumbing systems. The thermoplastic lining helps prevent corrosion and the ends are 3/4 in NPT tapered pipe thread for a fluid-tight seal. Dielectric nipple measures 2-1/2 in Length and is sold in a convenient 2-pack.
|
Camco USA 11523 3/4 in plastic water heater drain valve features an all plastic valve that fits directly into water heater for easy draining. 3/4 in pipe thread x 3/4 in male hose thread.
|
|
|
|
Ez-Flo WaterFlex Series 0437012 Corrugated Flexible Water Heater Connector, 3/4 in, FIP, Stainless Steel, 12 in L
|
|
Camco USA 02143 Water Heater Element, 120 V, 1500 W, Copper
|
|
ProLine Series 168-003NL Pipe Union, 1/2 in, FIP x Sweat, Steel, 200 psi Pressure
|
|
|
|
|
|
|
|
|
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4 in FIP x 3/4 in FIP.
|
Camco USA RV 1500 W universal element is designed to replace the heating element in your RV water heater. This UL recognized HWD replacement kit has a screw-in style flange. Gasket and complete instructions are included.
|
Rated for 250 psi at 180 deg F. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
|
|
|
|
Ez-Flo WaterFlex Series 0437018 Corrugated Flexible Water Heater Connector, 3/4 in, FIP, 18 in L, Stainless Steel
|
|
Camco USA 11260 Recyclable Drain Pan, Plastic, For: Electric Water Heaters, 21 in ID x 2-1/2 in D
|
|
Richmond RP12992 Nipple with Heat Trap, Zinc Plated Steel/Polypropylene
|
|
|
|
|
|
|
|
|
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4 in FIP x 3/4 in FIP.
|
For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
Plastic lined nipples are used for the hot and cold water connections of the water heater. The integral heat traps prevent conductive heat loss between the heated water in the water heater and the connected piping.
|
|
|
|
Camco USA 11460 Recyclable Drain Pan, Plastic, For: Electric Water Heaters, 22 in ID x 2-1/2 in D
|
|
ProLine Series 168-004NL Pipe Union, 3/4 in, FIP x Sweat, Steel, 250 psi Pressure
|
|
Apollo APXCSST18 Corrugated Connector, 1/2 x 3/4 in, PEX Barb x FHT, Stainless Steel, Metallic, 18 in L
|
|
|
|
|
|
|
|
|
For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
Rated for 250 psi at 180 deg F. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
|
Apollo Corrugated Connector, Nominal Size: 1/2 x 3/4 in, PEX Barb x FHT Connection, 200 psi, Temperature Rating: 250 deg F, Stainless Steel, Metallic, Silver, 18 in L, Includes: (5) Connectors
|
|
|
|
Camco USA 10023 Continuity Tester
|
|
Mueller ProLine Series 102-816 Heavy-Duty Water Heater Drain Valve, Brass
|
|
Camco USA 08123 Water Heater Thermostat, 240 V
|
|
|
|
|
|
|
|
|
Test your elements and thermostats while still in the water heater. 1 piece.
|
1-1/4 in shank length. Heavy brass construction. Neoprene seal disc. 3/4 in hose threaded outlet. Plated steel canopy handle. Pipe threads comply with ANSI B1.20.01. Hose threads comply with ANSI B1.20.7.
|
UL listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating.
|
|
|
|
Camco USA 11360 Recyclable Drain Pan, Plastic, For: Electric Water Heaters, 24 in ID x 2-1/2 in D
|
|
Ez-Flo WaterFlex Series 0437024 Corrugated Flexible Water Heater Connector, 3/4 in, FIP, Stainless Steel, 24 in L
|
|
Richmond RP49057 Element Wrench, SAE, 1-1/2 in, 1-7/8 in Head, 5 in L
|
|
|
|
|
|
|
|
|
For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
Connector with nickel-plated brass nuts and nitrile rubber sealing washer. Complies with no lead laws. Dimension of 3/4 in FIP x 3/4 in FIP.
|
Richmond Element Wrench, Dual, SAE/Metric: SAE, Head Size: 1-1/2 in, 1-7/8 in, 5 in L
|
|
|
|
Camco USA 02343 Water Heater Element, 208/240 V, 3500/4500 W, Copper
|
|
Camco USA 09943 Heavy-Duty Element Wrench, 4 in L
|
|
Camco USA 11400 Recyclable Drain Pan, Plastic, For: Electric Water Heaters, 26 in ID x 2-1/2 in D
|
|
|
|
|
|
|
|
|
Camco USA Water Heater Element, Screw Connection, 208/240 V, Wattage Rating: 3500/4500 W, Copper, Nickel, Includes: Gasket
|
Zinc-plated element wrenches fit all screw-in elements and 1-1/2 in nuts. Works with your screwdriver. Goes into offsets where an adjustable wrench can't.
|
For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
|
|
|
BrassCraft Copper-Flex Series WB00-12N Water Heater Connector, 3/4 in, FIP, Copper, 12 in L
|
|
Richmond RP11695 Electric Thermostat, For: Residential Electric Water Heater, 2-1/2 in H
|
|
Richmond RP6830 Universal Adapt-O-Flange Element Conversion Kit
|
|
|
|
|
|
|
|
|
BrassCraft Copper-Flex? 3/4 in female iron pipe inlet x 3/4 in female iron pipe outlet water heater connectors. Used to connect the water supply to your water heater, this connector features an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks.
|
Richmond Electric Thermostat, Temperature Setting Range: 90 to 150 deg F, Metal/Plastic, 1 in W, 2-1/2 in H, Suitable for: Residential Electric Water Heater
|
Allows the use of a standard screw-in element in a water heater that originally used a flange element.
|
|
|
|
Camco USA 02293 Water Heater Element, 240 V, 3800 W, Copper
|
|
Camco USA 02203 Water Heater Element Screw, 120 V, 2000 W, Copper
|
|
Camco USA 02263 Water Heater Element, 240 V, 3000 W, Copper
|
|
|
|
|
|
|
|
|
UL listed. Gasket included.
|
UL listed. Gasket included.
|
UL listed. Gasket included.
|
|
|
