|
Selkirk 243810 Storm Collar, 3 in Pipe, 3-5/8 in ID Dia, Galvanized
|
|
Selkirk 243430 Tee Support
|
|
Selkirk 243520 Wall Bracket, Galvanized
|
|
|
|
|
|
|
|
|
Type L pellent vent storm collar used at the top of the flashing to assist in shedding water from the assembly.
|
Selkirk Tee Support, Dimensions: 3 in Dia
|
For use on the exterior to support pipe to wall. Use only with Selkirk pellet stove pipe. Hold pipe 3 in from wall. UL listed.
|
|
|
|
Selkirk 243825 Roof Flashing, 11-1/4 in OAL, Galvanized Steel
|
|
Selkirk 243243 Adjustable Pipe Connector, Galvanized
|
|
Selkirk 243800 Vertical Termination Pipe Cap, 3 in ID x 8 in OD Dia, Galvanized
|
|
|
|
|
|
|
|
|
Type L pellet vent. Flashings are used for keeping water and other debris from entering between the pipe and roof. Adjustable pitch. UL Listed.
|
Adjustable pipe connector will connect to 3 in appliance outlet and is securely fastened with a hose clamp, while the male end adapts to the standard inlet end of 3 in VP pipe, elbow or tee. UL listed.
|
Vertical round top/termination cap. Type L pellet vent. Cap provides necessary protection of the vent system from rain and other elements. UL listed.
|
|
|
|
Selkirk 243215 Pellet Adjustable Stove Elbow, 45 deg Angle
|
|
Selkirk 244216 Pellet Vent Elbow, 4 in Connection
|
|
Selkirk PELLET PIPE 243231/243230 Stove Pipe Elbow, 90 deg Angle, 3 in, Stainless Steel, Galvanized
|
|
|
|
|
|
|
|
|
Selkirk Pellet Adjustable Stove Elbow, Angle: 45 deg, Dimensions: 3 in Dia
|
Selkirk Pellet Vent Elbow, 4 in Connection
|
Type L vent systems for pellet stove applications. For use in accommodating unusual offsets and configurations. Up to 90 deg maximum. Rated for flue temperatures up to 570 deg F. Model VP may be installed with a minimum 1 in air space clearance to combustible surfaces, framing lumber, drywall and plywood. UL listed.
|
|
|
|
Selkirk 244086 Adjustable Pellet Pipe, 4 in Dia, 12 in L, Stainless Steel
|
|
Selkirk 243803 Exit Cap, 3 in Dia, 5-3/4 in L, Galvanized
|
|
Selkirk 243805 Horizontal Termination Pipe Cap, 3 in ID x 8 in OD Dia, Galvanized
|
|
|
|
|
|
|
|
|
Selkirk? gives you the safe, efficient and cost-effective venting system that's engineered precisely for pellet burning stoves. The system is rated for flue temperatures up to 570 deg F.
|
Exit cone cap is designed to direct flue gases perpendicular to the wall and to increase their velocity, projecting them further away from the building. UL listed.
|
Horizontal termination cap is designed specifically for use on installations in which the Type L vent terminates in a horizontal orientation on the outside of a structure. UL listed.
|
|
|
|
Selkirk PELLET PIPE 243100 Tee, 3 in, Galvanized
|
|
Selkirk 243410 Ceiling Support, Galvanized
|
|
Selkirk 243460 Series Wall Thimble, 3-5/8 in ID x 7-1/2 in OD Dimensions, Wall Mounting
|
|
|
|
|
|
|
|
|
Type L air insulated pellet vent tee with cap designed for use in changing the orientation of the vent from horizontal to vertical and making inspection and cleaning of pellet stove system easier. UL listed.
|
Type L pellet vent ceiling support/firestop.
|
Type L pellet vent wall thimble must be used in all thru-the-wall installations involving combustible construction. UL listed. This Wall Thimble is widely used for pellet stoves.
|
|
|
|
Pllt Stove Elbow 90Deg Ss 4In
|
|
Selkirk 243246 Chimney Adapter, For: Pellet Pipe, Galvanized, 3 in Dia x 6 in L Dimensions
|
|
Selkirk 243248 Chimney Adapter, For: Pellet Pipe, Galvanized
|
|
|
|
|
|
|
|
|
|
Type L Pellet Vent to Selkirk Insulated Chimney Adapters are for use in connecting a Model VP Vent System into an existing Selkirk Chimney system.
|
Type L Pellet Vent to Selkirk insulated chimney adapters are for use in connecting a Model VP vent system into an existing Selkirk chimney system.
|
|
|
|
Selkirk PELLET PIPE 243231B/24230B Stove Pipe Elbow, 90 deg Angle, 3 in, Stainless Steel, Black
|
|
Chimney Adapter 4In
|
|
Selkirk 244100 Pellet Vent Tee with Cap, 4 in, Stainless Steel, Galvanized
|
|
|
|
Suggested Retail: $119.99
|
|
|
|
|
|
|
Type L vent systems for pellet stove applications. For use in accommodating unusual offsets and configurations. Up to 90 deg maximum. Rated for flue temperatures up to 570 deg F. Model VP may be installed with a minimum 1 in air space clearance to combustible surfaces, framing lumber, drywall and plywood. UL listed.
|
|
Selkirk Pellet Vent Tee with Cap, Nominal Size: 4 in, Stainless Steel, Galvanized, Dimensions: 10 in L, Temperature Rating: 570 deg F
|
|
|
|
Selkirk 283870 Pellet Stove Kit, Stainless Steel
|
|
|
|
|
Suggested Retail: $599.99
|
|
|
|
|
For pellet and corn appliances. Kit contains 3 in horizontal cap, 3 in 90 deg elbow, 3 in wall bracket, five 3 in 1 ft pipe lengths, 3 in tee with cleanout, 3 in wall thimble and 3 in pipe connector. System rated for flue temperatures up to 570 deg. Proven coupling joint connects in seconds to assure joint integrity. Gasketed joint design. Inner wall is 304 stainless steel, outer wall is paintable galvanized. Rolled-over male end eliminates sharp edges. 1 in clearance to combustibles. Removable tee cap for inspection and cleaning. Internal spacing bead assures uniform insulating air space between pipe walls. Meets UL-641 and UL-103.
|
|
|
