|
|
|
|
|
Selkirk 243810 Storm Collar, 3 in Pipe, 3-5/8 in ID Dia, Galvanized
|
|
Type L pellent vent storm collar used at the top of the flashing to assist in shedding water from the assembly.
|
|
|
|
|
|
|
|
Selkirk 243430 Tee Support
|
|
Selkirk Tee Support, Dimensions: 3 in Dia
|
|
|
|
|
|
|
|
Selkirk 243520 Wall Bracket, Galvanized
|
|
For use on the exterior to support pipe to wall. Use only with Selkirk pellet stove pipe. Hold pipe 3 in from wall. UL listed.
|
|
|
|
|
|
|
|
Selkirk 243243 Adjustable Pipe Connector, Galvanized
|
|
Adjustable pipe connector will connect to 3 in appliance outlet and is securely fastened with a hose clamp, while the male end adapts to the standard inlet end of 3 in VP pipe, elbow or tee. UL listed.
|
|
|
|
|
|
|
|
Selkirk 243825 Roof Flashing, 11-1/4 in OAL, Galvanized Steel
|
|
Type L pellet vent. Flashings are used for keeping water and other debris from entering between the pipe and roof. Adjustable pitch. UL Listed.
|
|
|
|
|
|
|
|
Selkirk 243800 Vertical Termination Pipe Cap, 3 in ID x 8 in OD Dia, Galvanized
|
|
Vertical round top/termination cap. Type L pellet vent. Cap provides necessary protection of the vent system from rain and other elements. UL listed.
|
|
|
|
|
|
|
|
SELKIRK VP PELLET PIPE 243215 Stove Pipe Elbow, 45 deg Angle, 3 in, Steel, Galvanized
|
|
Used to offset pipe around construction obstacles. Factory sealed at couplers to prevent leakage.
|
|
|
|
|
|
|
|
Selkirk 243803 Exit Cap, 3 in Dia, 5-3/4 in L, Galvanized
|
|
Exit cone cap is designed to direct flue gases perpendicular to the wall and to increase their velocity, projecting them further away from the building. UL listed.
|
|
|
|
|
|
|
|
Selkirk PELLET PIPE 243231/243230 Stove Pipe Elbow, 90 deg Angle, 3 in, Stainless Steel, Galvanized
|
|
Type L vent systems for pellet stove applications. For use in accommodating unusual offsets and configurations. Up to 90 deg maximum. Rated for flue temperatures up to 570 deg F. Model VP may be installed with a minimum 1 in air space clearance to combustible surfaces, framing lumber, drywall and plywood. UL listed.
|
|
|
|
|
|
|
|
Selkirk 243805 Horizontal Termination Pipe Cap, 3 in ID x 8 in OD Dia, Galvanized
|
|
Horizontal termination cap is designed specifically for use on installations in which the Type L vent terminates in a horizontal orientation on the outside of a structure. UL listed.
|
|
|