|
Selkirk 244810 Storm Collar, 4 in Vent Hole, Stainless Steel, Galvanized
|
|
AmeriVent 8RSC Adjustable Round Storm Collar, Steel, For: Type B Gas Vent Pipe
|
|
Selkirk 206810 Storm Collar, Specifications: 10 in Connection Size, For: Round Chimney Pipe
|
|
|
|
|
|
|
|
|
Selkirk Storm Collar, Vent Hole Size: 4 in, Stainless Steel, Galvanized
|
Use with HS chimney roof flashing to insure water tight installation.
|
Designed to fit on the round chimney pipe just above the roof flashing. The upper edge of the collar should be waterproofed with plastic sealer to prevent any water from leaking between the collar and chimney pipe. Part is tightened with screws or tabs after proper positioning.
|
|
|
|
Selkirk SURE-TEMP 208450 Locking Band, 8 in Dia, Stainless Steel
|
|
Selkirk 208810 Storm Collar, Specifications: 8 in Connection Size, For: Round Chimney Pipe
|
|
Selkirk 206480 Finishing Collar, Specifications: 6 in Size, Round, Black, Matte
|
|
|
|
|
|
|
|
|
Selkirk SURE-TEMP Locking Band, Stainless Steel, 8 in Dia, Suitable for: Chimney Pipe
|
Designed to fit on the round chimney pipe just above the roof flashing. The upper edge of the collar should be waterproofed with plastic sealer to prevent any water from leaking between the collar and chimney pipe. Part is tightened with screws or tabs after proper positioning.
|
Round collar fits lower end of suspended insulated chimney pipe to provide finished appearance. Used to attach T-DSA Smoke Pipe Adapter to lower end of chimney or to insulated Tee.
|
|
|
|
Wall Bracket/Support Ss 4In
|
|
AmeriVent 6SWA Adapter, Stainless Steel
|
|
Selkirk 206791 Spark Arrestor, Stainless Steel, 6 in Dia Dimensions
|
|
|
|
|
|
|
|
|
|
Included in ceiling support assembly, roof support assembly and tee assembly.
|
Diamond shaped 1/2 in x 1 in mesh, 18-8 stainless steel. Fits same size round chimney top. Keeps foreign objects out of chimney.
|
|
|
|
AmeriVent 8SWA Single Adapter, Stainless Steel
|
|
Selkirk 208480 Finishing Collar, Specifications: 8 in Size, Round, Black, Matte
|
|
Selkirk 256240 Chimney Pipe Adapter, 5.93 in Dia, Stainless Steel, Black
|
|
|
|
|
|
|
|
|
Included in ceiling support assembly, roof support assembly and tee assembly.
|
Round collar fits lower end of suspended insulated chimney pipe to provide finished appearance. Used to attach T-DSA Smoke Pipe Adapter to lower end of chimney or to insulated Tee.
|
Selkirk Chimney Pipe Adapter, Stainless Steel, Black, 5.93 in Dia
|
|
|
|
Selkirk 206465 Firestop/Joist Shield, 6 in, Stainless Steel
|
|
Selkirk 208791/208790 Spark Arrestor, Stainless Steel, 8 in Dia Dimensions
|
|
Selkirk 206520 Wall Band, 6 in Dia, Steel
|
|
|
|
|
|
|
|
|
Prevents or delays the rapid spread of fire (regardless of the cause) in a home or building. The sheet metal firestop prevents the chimney passageway from becoming an easy pathway for fire to spread from one floor to another.
|
Diamond shaped 1/2 in x 1 in mesh, 18-8 stainless steel. Fits same size round chimney top. Keeps foreign objects out of chimney.
|
Used along the wall to provide for 2 in clearance and assure stability. Useful for suspending offsets. Required at 8 ft or closer intervals to stabilize the chimney, wherever it is supported along a vertical wall.
|
|
|
|
Selkirk 258240 Chimney Pipe Adapter, 7.93 in Dia, Stainless Steel, Black
|
|
Selkirk 244800 Vertical Termination Cap, 4 in Dia, 4-1/4 in L, Gray
|
|
Selkirk 244825 Adjustable Pellet Flashing, 4 in Pipe
|
|
|
|
|
|
|
|
|
Selkirk Chimney Pipe Adapter, Stainless Steel, Black, 7.93 in Dia
|
Selkirk Vertical Termination Cap, Gray, Temperature Rating: 570 deg F, 4 in Dia, 4-1/4 in L
|
Selkirk Adjustable Pellet Flashing, Pipe Size: 4 in, Base Size: 15-1/2 in L x 13 in W, Roof Pitch: 0 to 6/12, Galvanized, Silver, Temperature Rating: 570 deg F
|
|
|
|
AmeriVent 6HS-SBA Wall Band Assembly, 6 in Dia, Galvanized Steel, Galvanized
|
|
Selkirk 208520 Wall Band, 8 in Dia, Steel
|
|
Selkirk 206488 Trim Plate Spacer, Steel, Black, Matte
|
|
|
|
|
|
|
|
|
Bracket for supporting the chimney pipe offsets, securing outdoor chimney to exterior wall.
|
Used along the wall to provide for 2 in clearance and assure stability. Useful for suspending offsets. Required at 8 ft or closer intervals to stabilize the chimney, wherever it is supported along a vertical wall.
|
Used to trim the ceiling when a chimney is supported from above and extended down into room. Also used in conjunction with firestop/joist shield.
|
|
|
|
Selkirk 206512 Adjustable Pitch Ceiling Plate, 6 in Pipe, Black, Matte
|
|
AmeriVent 8HS-SBA Wall Band Assembly, 8 in Dia, Galvanized Steel, Galvanized
|
|
BAND CHIMNEY LOCKING 6IN - Case of 4
|
|
|
|
|
|
|
|
|
Provides a finished appearance where the chimney passes through a sloped ceiling. Matte black finish. Adjusts to multiple roof pitches. Covers 4 in space around chimney pipe (or 2 in further than the required clearance).
|
Bracket for supporting the chimney pipe offsets, securing outdoor chimney to exterior wall.
|
Selkirk SURE-TEMP Locking Band, Stainless Steel, 6 in Dia, Suitable for: Chimney Pipe
|
|
|
|
Selkirk 208465 Series Firestop/Joist Shield, 12 in W Dimensions, 8 in, Stainless Steel
|
|
Selkirk DSP8SA-1 Stove Adapter, 8 in Dia, 7 in L, Stainless Steel, Black
|
|
Stove Damper Kit Black 6In
|
|
|
|
|
|
|
|
|
Prevents or delays the rapid spread of fire (regardless of the cause) in a home or building. The sheet metal firestop prevents the chimney passageway from becoming an easy pathway for fire to spread from one floor to another.
|
Selkirk Stove Adapter, Stainless Steel, Black, 7 in L, 8 in Dia
|
|
|
|
|
Horz Termination Cap Ss 4In
|
|
AmeriVent 6FFU Roof Vent Flashing, Galvanized Steel
|
|
Selkirk 206242 Drip less Smoke Stove Pipe Adapter, 316 Stainless Steel, 15-3/4 In L Dimensions
|
|
|
|
|
|
|
|
|
|
Standard flashings fit various pitch roofs. Its double seamed construction protects from water leakage.
|
Selkirk Drip less Smoke Stove Pipe Adapter, 316 Stainless Steel, Dimensions: 15-3/4 In L
|
|
|
