|
Qualcraft 10720 Concrete Strap with Loop End, 4 ft L Line
|
|
Guardian Fall Protection 01837 Locking Carabiner, Steel
|
|
Werner A230302W Anchor, Permanent, Stainless Steel, Gray
|
|
|
|
|
|
|
|
|
A versatile product that works well as an inexpensive anchor solution. As a disposable anchor point, it can be used in other applications such as wood framing members, rebar, pipe racking and more. Their loop ends are ideal for use where a metal D-ring could damage glass or other fragile materials. They must, however, always be anchored to a structure capable of supporting 5000 lb.
|
Guardian Fall Protection double-locking carabiners (made from either steel or aluminum) are specially designed to be both supremely durable and easy to use. The gate is certified to withstand loads up to 3600 lb is self-closing and self-locking and can be opened with just one hand.
|
The A230302W Werner permanent roof anchor is designed for use in both new construction and repair work. With stainless steel construction and included stainless steel fasteners, the anchor can be installed and left behind for future repair or maintenance work. The anchor includes D-rings for connection.
|
|
|
|
Guardian Fall Protection 00455 Temper Anchor, Zinc-Plated Steel
|
|
Qualcraft Industries Ridge-It Series 00500 Single D-Ring Roof Anchor, Stainless Steel
|
|
Werner A210402W Anchor, Temporary, Steel, Red
|
|
|
|
|
|
|
|
|
The Guardian Fall Protection temper anchor is designed for use on wood, steel and concrete substrates. It can fit all roof pitches from flat to sheer, is composed of thick plated steel for longer lasting product life and is ideal for fall arrest and restraint applications. This anchorage connector can be installed with either screws or nails (depending on roof pitch) and its designed offset holes down the center help keep the truss from splitting. Supplied with all necessary fasteners (always use new fasteners for each new installation application).
|
Qualcraft Industries Ridge-It Single D-Ring Roof Anchor, Stainless Steel, Dimensions: 9-3/4 in L, Includes: Nails
|
The A210402W Werner temporary roof anchor is reusable, compatible with most roofs and designed for easy transport, installation, removal and storage.
|
|
|
|
Guardian Fall Protection 00510 Ridge-It Anchor, Butyl/Stainless Steel/Zinc-Plated Steel
|
|
FB HARNESS VEL STD PT LEG SM-L
|
|
Werner UpGear Series C38000W Lanyard, 310 lb, 6 ft L Line, Polyester Line, Snap Harness Hook
|
|
|
|
|
|
|
|
|
The Guardian Fall Protection Ridge-It anchor line is designed for use on wood rooftops. This Ridge-It model RIDG-1 is manufactured with a D-ring on one end and is 9-3/4 in L, while the RIDG-2 is manufactured with two D-ring ends and is 18 in L. Ridge-It anchors are composed highly durable stainless steel and zinc plated steel and are compliant with all applicable OSHA regulations. Ridge-It anchors are easy to install and are ideal for both residential construction and maintenance work.
|
|
The Werner C380000W 6ft shock-absorbing lanyard is constructed of high strength, polyester web and contains an energy absorber to reduce forces of a fall to a safe level.
|
|
|
|
Werner H5112 Series H511202W Harness, One-Size, 6000 lb, Polyester Webbing, Blue/Yellow
|
|
Qualcraft 11200 Lanyard, 6 ft L Line, Polyester Line
|
|
Guardian Fall Protection 37001 Full Body Harness, M/L, 130 to 420 lb, Black/Yellow
|
|
|
|
|
|
|
|
|
The Werner H511202W premium Harness features great designed shoulder pads providing comfort foam on contact points. Safely designed chest strap adjustment allows downward adjustment away from neck and eliminates choking hazard in event of a fall. Inclusion of back-strap designed to keep the worker in harness in event of a backward fall. Sub-pelvic positioning ensures proper loading and position after a fall which allows the user to manipulate into a seated position. Fall indicator and label protection ensure compliance with legible labels.
|
Made with heavy-duty outer polyester webbing and a polyester core specifically sewn in to reduce impact forces. Does not stretch and has no shock pack, lightweight.
|
Redesigned from the ground up, the Guardian Series 1 full body harness is the perfect entry level harness solution and is ideal for outfitting large crews, roofing, contracting, general industry and much more. Series 1 harnesses feature durable water repellent, contrasting core webbing that makes any damage easy to see, greatly improving the inspection process. Webbing ends are folded and stitched with rubber tabs for durability and rubber web keepers prevent loose straps from interfering with your work. Dual lanyard keepers safely store unused lanyard legs and the two-bar torso adjusters make fitting the harness fast and precise. Available with or without side D-rings and with quick-connect, pass-through or tongue and grommet buckles.
|
|
|
|
Guardian Fall Protection 37002 Full Body Harness, XL/2XL, 130 to 420 lb, Polyester Webbing, 2-Bar Adjuster Torso Buckle
|
|
Guardian Fall Protection 01220 External Shock Lanyard, 130 to 310 lb, 6 ft L Line, Nylon/Polyester Line, 1-Leg, Snap
|
|
Guardian Fall Protection 37005B Full Body Harness, M/L, 130 to 420 lb, Polyester Webbing, Black/Yellow
|
|
|
|
|
|
|
|
|
Redesigned from the ground up, the Guardian Series 1 full body harness is the perfect entry level harness solution and is ideal for outfitting large crews, roofing, contracting, general industry and much more. Series 1 harnesses feature durable water repellent, contrasting core webbing that makes any damage easy to see, greatly improving the inspection process. Webbing ends are folded and stitched with rubber tabs for durability and rubber web keepers prevent loose straps from interfering with your work. Dual lanyard keepers safely store unused lanyard legs and the two-bar torso adjusters make fitting the harness fast and precise. Available with or without side D-rings and with quick-connect, pass-through or tongue and grommet buckles.
|
The shock absorbing lanyard is the premiere free fall lanyard offered by Guardian Fall Protection. It meets all the stringent ANSI Z359.13-2013 regulations and the integrated shock absorbing component limits average arresting forces to 900 lb or less. It is comprised of 1 in nylon webbing and is available in a variety of lengths and connector options, including steel and aluminum snap hooks and rebar hooks, all of which make it one of the most functional and durable lanyards on the market.
|
Redesigned from the ground up, the Guardian Series 1 full body harness is the perfect entry level harness solution and is ideal for outfitting large crews, roofing, contracting, general industry and much more. Series 1 harnesses feature durable water repellent, contrasting core webbing that makes any damage easy to see, greatly improving the inspection process. Webbing ends are folded and stitched with rubber tabs for durability and rubber web keepers prevent loose straps from interfering with your work. Dual lanyard keepers safely store unused lanyard legs and the two-bar torso adjusters make fitting the harness fast and precise. Available with or without side D-rings and with quick-connect, pass-through or tongue and grommet buckles.
|
|
|
|
FB HARNESS SERAPH UNIV MED-LRG
|
|
Guardian Fall Protection 01310 Vertical Lifeline Assembly, 130 to 310 lb, 25 ft L Line, Double Locking Snap Harness Hook
|
|
Qualcraft 01285 Lanyard, Nylon Line
|
|
|
|
|
|
|
|
|
|
The Guardian Fall Protection poly steel rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10 to 15%, but unlike nylon, poly steel rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly steel is ten times stronger than polypropylene and while it may become fibrous, this is just a result of normal wear and does not indicate it needs to be replaced. It is 5/8 in THK and is available with a variety of component configurations, including a shock absorber, positioning device, 18 in extension lanyard and two double locking snap hooks.
|
Ideal for positioning and restraint situations. Can be quickly adjusted from 4 to 6 ft L. Comes with a shock absorber.
|
|
|
|
Werner L242050W Lifeline, 50 ft L Line, 5/8 in W Line, Double-Locking, Snap Harness Hook
|
|
Qualcraft 01295 Lanyard, 4.5 to 6 ft L Line, Nylon Line
|
|
Qualcraft 01230 Lanyard with High Strength Snap Hook, 900 lb, Nylon Line
|
|
|
|
|
|
|
|
|
The Werner L242050W vertical lifeline is a polyester-polypropylene blend, 5/8 in Dia, 3-strand rope. With the strength needed on the job, UpGear remains lightweight and provides a comfortable grip and chafe protection for the user. The 50 ft lifeline includes a 3 ft lanyard connection and double snap hook.
|
Ideal for work in tight spaces or around machinery, since its stretching capability helps reduce hazards of tripping or catching on moving parts. The lanyard stretches from between 4-1/2 to 6 ft and is available in a variety of connector options. Lightweight and its unique design eliminates the need for an external shock absorber.
|
The shock absorbing lanyard is the premiere free fall lanyard offered by Qualcraft Industries. It meets all the stringent ANSI Z359.13-2009 regulations and the integrated shock absorbing component limits average arresting forces to 900 lb or less. It is comprised of 1 in nylon webbing and is available in a variety of lengths and connector options, including steel and aluminum snap hooks and rebar hooks, all of which make it one of the most functional and durable lanyards on the market.
|
|
|
|
Guardian Fall Protection 01320 Vertical Lifeline Assembly, 130 to 310 lb, 50 ft L Line, Double Locking Snap Harness Hook
|
|
Qualcraft 17200 Universal Aerial Lift Kit
|
|
Qualcraft 01610 Rebar Positioning Assembly
|
|
|
Suggested Retail: $119.99
|
|
|
Suggested Retail: $119.99
|
|
|
|
|
|
|
The Guardian Fall Protection poly steel rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10 to 15%, but unlike nylon, poly steel rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly steel is ten times stronger than polypropylene and while it may become fibrous, this is just a result of normal wear and does not indicate it needs to be replaced. It is 5/8 in THK and is available with a variety of component configurations, including a shock absorber, positioning device, 18 in extension lanyard and two double locking snap hooks.
|
Includes a universal fit harness HUV (01101) with an attached 6 ft internal shock lanyard (Sku 639.7582) and a heavy-duty ballistic nylon bag with Velcro closure (00762). The grommets on the bag allow for you to attach the bag to a lift basket.
|
Qualcraft Rebar Positioning Assembly
|
|
|
|
Qualcraft 00870 Roofer's Bucket Kit
|
|
Werner K12A Series K122023W Aerial Kit, Black
|
|
Werner K211 Series K211201W Roofing Safety System, 3-Piece, Multi-Color
|
Suggested Retail: $129.99
|
|
|
Suggested Retail: $129.99
|
|
|
Suggested Retail: $129.99
|
|
|
|
|
|
|
The Lil' bucket of safe-tie is a roofing kit built for the roofer, by the roofer. The Lil' bucket of safe-tie comes with one HUV harness (different size options are available), one 6 ft single leg lanyard with shock pack and one nylon bag for equipment transportation and storage.
|
The Werner K122023 aerial kits include a harness and energy absorbing lanyard for use with aerial lifts. The harness and lanyard are packaged in a convenient tool bag. The URMARK logo program is available with this kit and allows personalization of the tool bag and harness with a customer logo.
|
The Werner K211201W roofing safety system includes a universal harness, a 50 ft lifeline with a shock-absorbing lanyard and a temporary roof anchor. The system provides a complete fall protection solution for the roofing contractor all in a convenient bucket. UpGear's red, yellow and green color coding system identifies the three-products in the fall protection system - anchor, connector and harness.
|
|
|
|
Werner H5130 Series H513002W Harness, One-Size, Polyester Webbing, Safety Green
|
|
Qualcraft 00815 Bucket of Safe-Tie Kit, Polyester/Polypropylene, Specifications: 300 lb Capacity
|
|
Qualcraft 00805 Bucket of Safe-Tie Kit, Polyester/Polypropylene
|
Suggested Retail: $129.99
|
|
|
Suggested Retail: $139.99
|
|
|
Suggested Retail: $139.99
|
|
|
|
|
|
|
The Werner H513002W universal harness features maximum comfort, adjustability and safety. The harness features quick-connect buckles for easy on and off and a moisture-wicking back pad for cushioned comfort in the back and shoulders. Web-Alert inspectable webbing shows red in the event of wear, while chest strap and sub-pelvic strap designs allow workers to get in a safe position in the event of a fall.
|
Qualcraft Bucket of Safe-Tie Kit, Specifications: 300 lb Capacity, Polyester/Polypropylene, Includes: UV Universal Harness with 5-Point of Adjustment, 50 ft Vertical Lifeline Assembly with Shock Pack, Positioning Device, 18 in Extension Lanyard, Temper Anchor with Fasteners
|
Qualcraft Bucket of Safe-Tie Kit, Specifications: 300 lb Capacity, Polyester/Polypropylene, Includes: UV Universal Harness with 5-Point of Adjustment, 25 ft Vertical Lifeline Assembly with Shock Pack, Positioning Device, 18 in Extension Lanyard, Temper Anchor with Fasteners
|
|
|
