|
AmeriVent 3ESC Fixed Storm Collar, 3 in Vent Hole, Galvanized Steel
|
|
AmeriVent 4ESC Fixed Storm Collar, 4 in Vent Hole, Galvanized Steel
|
|
AmeriVent 4EVC Vent Collar, 4 in Vent Hole, Galvanized Steel
|
|
|
|
|
|
|
|
|
Use as a counter flashing. Use mastic to seal the vent pipe.
|
Use as a counter flashing. Use mastic to seal the vent pipe.
|
Provides a cover for rough wall openings and serves as a firestop.
|
|
|
|
AmeriVent 3EVC Vent Collar, 3 in Vent Hole, Galvanized Steel
|
|
AmeriVent 5EVC Vent Collar, 5 in Vent Hole, Galvanized Steel
|
|
AmeriVent 6EVC Vent Collar, 6 in Vent Hole, Galvanized Steel
|
|
|
|
|
|
|
|
|
Provides a cover for rough wall openings and serves as a firestop.
|
Provides a cover for rough wall openings and serves as a firestop.
|
Provides a cover for rough wall openings and serves as a firestop.
|
|
|
|
AmeriVent 3VPH Vent Pipe Hanger, 3-1/2 in Duct, Steel
|
|
AmeriVent 5ESC Fixed Storm Collar, 5 in Vent Hole, Galvanized Steel
|
|
COLLAR STORM VENT 2WALL 6IN
|
|
|
|
|
|
|
|
|
Bracket for supporting the chimney pipe offsets, securing outdoor chimney to exterior wall.
|
Use as a counter flashing. Use mastic to seal the vent pipe.
|
Use as a counter flashing. Use mastic to seal the vent pipe.
|
|
|
|
AmeriVent 3EF Roof Vent Flashing, 14-3/4 in OAL, 12-1/2 in OAW, Steel
|
|
AmeriVent 4EF Roof Vent Flashing, 16-3/8 in OAL, 13-3/4 in OAW, Galvanized Steel
|
|
Selkirk 104825 Roof Flashing, 16 in OAL, 13-1/4 in OAW, Aluminum/Galvanized Steel
|
|
|
|
|
|
|
|
|
The standard flashing fits flat to 5/12 pitch roof and is made of double-seamed construction for protection from leakage. For a standard flashing with a 6 in skirt, the model number reads the size and EFFU or RFFU.
|
The standard flashing fits flat to 5/12 pitch roof and is made of double-seamed construction for protection from leakage. For a standard flashing with a 6 in skirt, the model number reads the size and EFFU or RFFU.
|
Selkirk Roof Flashing, Aluminum/Galvanized Steel, 16 in OAL, 13-1/4 in OAW, Suitable for: 4 in Dia Pipe
|
|
|
|
AmeriVent 5EF Roof Vent Flashing, 17-15/16 in OAL, 15 in OAW, Steel
|
|
Selkirk 104800 Bird Proof Round Top, 4 in Dimensions
|
|
AmeriVent 3EIX4 Increaser, 3 x 4 in Connection, Aluminum/Steel
|
|
|
|
|
|
|
|
|
The standard flashing fits flat to 5/12 pitch roof and is made of double-seamed construction for protection from leakage. For a standard flashing with a 6 in skirt, the model number reads the size and EFFU or RFFU.
|
Selkirk Bird Proof Round Top, Dimensions: 4 in
|
The increaser is used to increase vent size. A max of 4 step of increase.
|
|
|
|
AmeriVent 3E45 Elbow, 3 in Connection, 0.018/0.012 Gauge, Aluminum/Steel, Galvanized
|
|
AmeriVent 3ECW Snap Lock Vent Cap, 3 in Connection
|
|
AmeriVent 4ECW Snap Lock Vent Cap, 4 in Connection
|
|
|
|
|
|
|
|
|
Lightweight air-insulated, double-wall metal construction with an inner pipe of reflecting aluminum and an outer pipe of corrosion-resistant galvanized steel for strength, safety and durability. Adjustable from 0 to 45 deg.
|
The AmeriVent cap is the first engineered vent cap to gain recognition across the country for its performance. Millions of them are now installed on homes and business structures to protect against wind conditions that can cause waste gases to spill back into the structure through the appliance draft hood. The AmeriVent cap is UL listed and its patented design of ports and baffles keep rain and debris out of the vent. In addition, AmeriVent caps permit termination of vents at the minimum height necessary above the roof surface. The AmeriVent cap is used as a ventilation cap as well as a Type B gas vent termination.
|
Use as a ventilation cap as well as Type B vent termination. Protects against waste gases spilling back into the structure through the appliances draft hood.
|
|
|
|
AmeriVent 3EWT Series Wall Thimble, 3-9/16 in ID x 3-1/16 L Dimensions, 0.018 ga, Galvanized Steel
|
|
Universal Vent Cap Al 3-4In
|
|
AmeriVent 4EWT Series Wall Thimble, 4-9/16 in ID x 3-1/16 L Dimensions, 0.018 ga, Galvanized Steel
|
|
|
|
|
|
|
|
|
Adjusts for various wall thicknesses from 4 to 6 in. Provides proper clearance for vent from combustibles and serves as a firestop.
|
|
Adjusts for various wall thicknesses from 4 to 6 in. Provides proper clearance for vent from combustibles and serves as a firestop.
|
|
|
|
AmeriVent 5E45 Elbow, 5 in Connection, 0.018 Gauge, Aluminum/Steel, Galvanized
|
|
CAP GAS VENT 5IN DOUBLE WALL
|
|
AmeriVent 6EWT Series Wall Thimble, 6-9/16 in ID x 3-1/4 in L Dimensions, 0.018 ga, Galvanized Steel
|
|
|
|
|
|
|
|
|
Lightweight air-insulated, double-wall metal construction with an inner pipe of reflecting aluminum and an outer pipe of corrosion-resistant galvanized steel for strength, safety and durability. Adjustable from 0 to 45 deg.
|
Use as a Ventilation Cap as well as Type B Vent Termination. Protects against waste gases spilling back into the structure through the appliances draft hood.
|
Adjusts for various wall thicknesses from 4 to 6 in. Provides proper clearance for vent from combustibles and serves as a firestop.
|
|
|
|
AmeriVent 5EWT Series Wall Thimble, 5-9/16 in ID x 3-1/16 in L Dimensions, 0.018 ga, Galvanized Steel
|
|
AmeriVent 6EF Roof Vent Flashing, 18-3/4 in OAL, 16-1/8 in OAW, Steel
|
|
AmeriVent 3EAL Elbow, 3 in Connection
|
|
|
|
|
|
|
|
|
Adjusts for various wall thicknesses from 4 to 6 in. Provides proper clearance for vent from combustibles and serves as a firestop.
|
The standard flashing fits flat to 5/12 pitch roof and is made of double-seamed construction for protection from leakage. For a standard flashing with a 6 in skirt, the model number reads the size and EFFU or RFFU.
|
The adjustable 90 deg elbow is constructed of four sections for smoother bends and less resistance. The elbow adjusts from 0 to 90 deg easily in order to clear rafters or ceiling joists.
|
|
|
|
CAP GAS VENT 6IN DOUBLE WALL
|
|
AmeriVent 4EAL Elbow, 4 in Connection
|
|
Universal Vent Cap Al 5-6In
|
|
|
|
|
|
|
|
|
Use as a Ventilation Cap as well as Type B Vent Termination. Protects against waste gases spilling back into the structure through the appliances draft hood.
|
The adjustable 90 deg elbow is constructed of four sections for smoother bends and less resistance. The elbow adjusts from 0 to 90 deg easily in order to clear rafters or ceiling joists.
|
|
|
|
