|
Orbit 37227 Cut-off Riser, 6 in L, Polyethylene
|
|
Orbit 94345 Adapter, 1/2 in Connection, MPT x Barb, Plastic
|
|
Orbit 94349 Flexible Riser Tube Coupling, 1/2 in Connection, Barb, Plastic
|
|
|
|
|
|
|
|
|
This riser is made of durable polyethylene and conveniently molded so it can be easily cut to the desired length during installation.
|
Made of durable high-impact plastic to ensure long-life, these fittings have sharp spiral barbs that eliminate the need for glue and clamps. Quickly and simply insert the fittings by hand into 1/2 in riser flex pipe and you are done.
|
Riser flex fittings come in many sizes and varieties to add versatility to your sprinkler system. The fittings are durable as the flexible plastic is less likely to break on impact and the spiral barbs fasten to the riser flex pipe eliminating the need for glue and clamps.
|
|
|
|
Orbit 94359 Elbow, 1/2 in Connection, MNPT x Barb, Plastic, Black
|
|
Orbit 94360 Elbow, 3/4 x 1/2 in Connection, MNPT x Barb, Plastic
|
|
Orbit 37017 Cut-Off Riser Extension, 1/2 in Connection, 2-1/2 in L, FPT x MIPT, Polyethylene, Black
|
|
|
|
|
|
|
|
|
Made of durable high-impact plastic to ensure long-life, these fittings have sharp spiral barbs that eliminate the need for glue and clamps. Quickly and simply insert the fittings by hand into 1/2 in riser flex pipe and you are done.
|
Made of durable high-impact plastic to ensure long-life, these fittings have sharp spiral barbs that eliminate the need for glue and clamps. Quickly and simply insert the fittings by hand into 1/2 in riser flex pipe and you are done.
|
This riser is an extension to the cut-off riser and is made of flexible plastic composition that allows constant bending without breaking. It can be cut to the desired length and is not for use under continuous pressure.
|
|
|
|
Orbit 94350 Tee, 1/2 in Connection, Barb, Plastic
|
|
Orbit 37114 Cut-Off Riser, 1/2 x 3/4 in Connection, 6 in L, Polyethylene, Black
|
|
Orbit 54009D Shrub Sprinkler Head, Full-Circle, 3 gpm, 1/2 in Connection, FNPT, Plastic
|
|
|
|
|
|
|
|
|
Made of durable high-impact plastic to ensure long life, these fittings have sharp spiral barbs that eliminate the need for glue and clamps. Quickly and simply insert the fittings by hand into 1/2 in riser flex pipe, and you are done.
|
This riser is made of molded plastic. It can be cut-to the desired length and is not for use under continuous pressure.
|
This shrub head has a durable plastic insert nozzle and a 1/2 in. FNPT inlet. The plastic nozzle is designed with a 15 ft full spray pattern. This shrub head is also designed with a filter that prevents debris from clogging it.
|
|
|
|
Rain Bird SWGE075S Elbow, 3/4 x 1/2 in Connection, MNPT x Barb, Polyethylene, Black
|
|
Orbit 37113 Cut-Off Riser, 3/4 in Connection, 6 in L, Polyethylene, Black
|
|
Rain Bird SWGCPLG Swing Pipe Coupling, 1/2 in Connection, Barb, Polyoxymethylene, Black
|
|
|
|
|
|
|
|
|
Rain Bird Elbow, 3/4 x 1/2 in Connection, MNPT x Barb Connection, Polyethylene, Black, Temperature Rating: 35 deg F
|
This riser is made of flexible plastic composition that allows constant bending without breaking. It can be cut-to the desired length and is not for use under continuous pressure.
|
Rain Bird Swing Pipe Coupling, 1/2 in Connection, Barb Connection, 2.12 in W, 1/2 in D, 0.56 in H, Polyoxymethylene, Black, 80 psi, Temperature Rating: 110 deg F
|
|
|
|
Orbit 37169 Cut-Off Riser, 1/2 in Connection, 12 in L, Polyethylene, Black
|
|
Rain Bird SWGF050 Swing Pipe Elbow, 1/2 in Connection, FNPT, Polyoxymethylene, Black
|
|
Rain Bird SWGS050S Pipe Elbow, 1/2 in Connection, MNPT x FNPT, Plastic/Polyethylene, Black
|
|
|
|
|
|
|
|
|
This riser is made of durable polyethylene and conveniently molded so it can be easily cut to the desired length during installation.
|
Rain Bird Swing Pipe Elbow, 1/2 in Connection, FNPT Connection, 2-1/4 in W, 1.06 in D, 1.13 in H, Polyoxymethylene, Black, 80 psi, Temperature Rating: 110 deg F
|
Rain Bird Pipe Elbow, Flex, 1/2 in Connection, MNPT x FNPT Connection, 2 in W, 1.13 in D, 1-1/2 in H, Plastic/Polyethylene, Black
|
|
|
|
Rain Bird SWGS075S Pipe Elbow, 3/4 in Connection, MNPT x FNPT, Plastic/Polyethylene, Black
|
|
Rain Bird 1300 Flower Bubbler, 1/2 in Connection, FNPT, Plastic/Stainless Steel
|
|
Orbit 54042 Mushroom Bubbler, 1/2 in Connection, Plastic
|
|
|
|
|
|
|
|
|
Rain Bird Pipe Elbow, Flex, 3/4 in Connection, MNPT x FNPT Connection, 2.31 in W, 1.39 in D, 1.81 in H, Plastic/Polyethylene, Black
|
RAINBIRD? 1300 Series flower bubblers provide a controlled, gentle umbrella of water for irrigating trees, flowers and shrub areas. Mount these bubblers on 1/2 in male risers to effectively water areas from 1 to 3 ft.
|
The mushroom Bubbler II is ideal for watering small areas of flowers, shrubs and trees. The water flow adjusts from a light trickle to full flow. It contains a filter for preventing debris from clogging the nozzle and it is made of durable plastic with a 1/2 in female threaded inlet.
|
|
|
|
Orbit 55070 Voyager II Adjustment Key, White
|
|
Rain Bird RISERC06 Cut-Off Riser, 1/2 in Connection, 6 in L, MIP, PVC
|
|
Rain Bird 8HC1 Fixed Pattern Spray Nozzle, 1/2 in Connection, Female, 8 ft
|
|
|
|
|
|
|
|
|
Orbit Voyager II Adjustment Key, White
|
Use to adjust the height of pop-up sprinkler heads from 1 to 6 in.
|
Trusted for decades, Rain Bird? MPR Nozzles simplify the design process by allowing sprinklers with various arcs and radii to be mixed on the same zone while maintaining even water distribution rates. This allows them to spray an equal distance and to provide an equal amount of water to a given area. A wide selection of MPR nozzles is available, so the distribution of water can be tailored to meet the unique and diverse needs of your landscape. MPR nozzles are designed to provide uniform coverage, ensuring that your lawn is green throughout, with no dry or brown spots.
|
|
|
|
Rain Bird 12-AP Spray Nozzle, Up to 12 ft
|
|
Orbit 54325 Sprinkler Head, 1.5 gpm, 1/2 in Connection, FNPT, 12 ft, Plastic
|
|
Orbit 54324 Sprinkler Head, 1 gpm, 1/2 in Connection, FNPT, 12 ft, Plastic
|
|
|
|
|
|
|
|
|
Rain Bird? AP adjustable pattern spray nozzles can be adjusted to the exact pattern of your lawn, ensuring your landscape will be precisely watered, so you don't need to worry about it. They are ideal for odd-shaped corners and smaller grassy areas around sidewalks and driveways, they can also be used for watering flowerbeds or shrubs.
|
Spring-loaded pop-up economy head with plastic nozzle for medium size yards. Space 10 to 15 ft apart. Wiper seal keeps out sand and grit. Stainless steel retraction spring. 1/2 ft MNPT connection.
|
Spring-loaded pop-up economy head with plastic nozzle for medium size yards. Space 10 to 15 ft apart. Wiper seal keeps out sand and grit. Stainless steel retraction spring. 1/2 ft MNPT connection.
|
|
|
|
Orbit 54326 Sprinkler Spray Head, 1/2 in Connection, FNPT, 2 in H Pop-Up, 450 sq-ft, 45 deg Nozzle Trajectory, Plastic
|
|
Rain Bird 1800CAPS Spray Head Cap, Black, For: 1800 Series Sprays
|
|
Rain Bird 15AP Sprinkler Nozzle, Up to 15 ft
|
|
|
|
|
|
|
|
|
Orbit Sprinkler Spray Head, 1/2 in Connection, FNPT Connection, Full-Circle/Part-Circle: Full-Circle, Nozzle Type: Full Pattern, Nozzle Trajectory: 45 deg, Pop-Up Height: 2 in, Operating Range: 450 sq-ft, 3.4 gpm, 80 psi, Plastic, Black, Dimensions: 4 in H x 1-1/2 in W x 1-1/2 in D, Includes: Plastic Nozzle
|
Rain Bird Spray Head Cap, Black, Suitable for: 1800 Series Sprays
|
Nozzle distributes water evenly regardless of pattern and is compatible with other Rain Bird matched flow rate nozzles. Adjustable flow and radius. Stainless steel adjustment screw. Filter screen. 15 ft spacing at 30 psi. For use with 1800, SP40, SP25 series, 1240 Series and Optima lines, 7025 and 7040.
|
|
|
|
Rain Bird 15FC1 Fixed Pattern Spray Nozzle, 2.6 to 3.7 gpm, 15 ft, PVC
|
|
Rain Bird 18-AP Spray Nozzle, 18 ft
|
|
Rain Bird 15SSTC1 Spray Nozzle, 4 to 30 ft, PVC
|
|
|
|
|
|
|
|
|
Trusted for decades, Rain Bird? MPR Nozzles simplify the design process by allowing sprinklers with various arcs and radii to be mixed on the same zone while maintaining even water distribution rates. This allows them to spray an equal distance and to provide an equal amount of water to a given area. A wide selection of MPR nozzles is available, so the distribution of water can be tailored to meet the unique and diverse needs of your landscape. MPR nozzles are designed to provide uniform coverage, ensuring that your lawn is green throughout, with no dry or brown spots.
|
Rain Bird? AP adjustable pattern spray nozzles can be adjusted to the exact pattern of your lawn, ensuring your landscape will be precisely watered, so you don't need to worry about it. They are ideal for odd shaped corners and smaller grassy areas around sidewalks and driveways, they can also be used for watering flowerbeds or shrubs.
|
MPR nozzles simplify the design process by allowing sprinklers with various arcs and radii to be mixed on the same zone while maintaining even water distribution rates. This allows them to spray an equal distance and to provide an equal amount of water to a given area.
|
|
|
