HOG RINGS & PLIERS

Home > FARM & RANCH > LIVESTOCK CARE & SUPPLIES > SWINE SUPPLIES > HOG RINGS & PLIERS

Sort By:

Seymour 69022 Pig Ring, 12.5 ga Wire, Steel, Copper

Seymour 69024 Shoat Ring, 12.5 ga Wire, Steel, Copper

Seymour 69027 Hog Ring, 12.5 ga Wire, Steel, Copper

Suggested Retail: $8.69

Suggested Retail: $8.69

Copper-coated steel, economical, used for hog rings and general-purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay. Copper-coated steel, economical, used for hog rings and general-purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay. Copper-coated steel, economical, used for hog rings and general-purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay.

Seymour 69300 Hog Ring, 11 ga Wire, Steel, 25/BX, Copper

Seymour 69302 Hog Ring, 11 ga Wire, Steel, Copper, 25/BX

Seymour 69029 Hog Ring, 11 ga Wire, Steel, Copper, 65/BX

Suggested Retail: $9.99

Suggested Retail: $10.99

11 ga copper-coated steel, economical, used for hog rings and general-purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay. Box 25 rings. 11 ga copper-coated steel, economical, used for hog rings and general-purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay. Box 25 rings. Copper-coated steel, economical, used for hog rings and general-purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay.

Seymour 69045 Ring Plier, Iron Jaw, 6-1/2 in L

Seymour 69356 Ring Plier, Iron Jaw, 6-1/4 in L

Seymour 69305 Ring Plier, Cast Iron Jaw, 7-3/4 in L

Suggested Retail: $16.99

Suggested Retail: $19.99

Suggested Retail: $54.99

Specially designed to hold and close hog rings and ring fasteners. Made from tough malleable iron castings with zinc plated finish. Use with ring patterns No. H1, H2, H3, PBH1, PBH2, PBH3, B1, B2 and B3. Made from tough malleable iron castings with zinc plated finish. Specially designed to hold and close hog rings and ring fasteners. Use with ring pattern No. 541, 641, 741, 742, all rings less than 3/4 in. Specially designed to hold and close hog rings and ring fasteners. Use with ring pattern No. X1, X3, H1, H2, H3, PBH1, PBH2, PBH3, B1, B2, B3.

Seymour 69324 Cage/Trap Ring, 14 ga Wire, Steel, Galvanized

Suggested Retail: $77.99

Link Handle 69324 Crab Pot Slant Offset Cage/Trap Ring

14 ga galvanized steel for applications where moderate cost and resistance to rust are important. Slant cut for applications requiring penetration such as hog rings. Offset design allows ring to pass for complete closure. Ideal for fastening small diameter materials that could pass through a small gap.


	1