PRESSURE WASHER ACCESSORIES

Home > POWER TOOLS & ACC > POWER TOOLS > POWER/PRESSURE WASHERS & ACCES > PRESSURE WASHER ACCESSORIES

Sort By:

1 2 3 ... 6

Forney 75135 Plug, 1/4 in Connection, Quick Connect Plug x FNPT, Steel

Forney 75195 Pipe Thread Tape, 260 in L, 1/2 in W, Teflon

Valley Industries PK-85300105 Plug, 3/8 in Connection, Quick Connect x MNPT, Steel, Plated

Suggested Retail: $3.49

Suggested Retail: $4.29

Suggested Retail: $4.59

Forney Plug, 1/4 in Connection, Quick Connect Plug x FNPT Connection, Steel, 5500 psi Pressure Pipe thread tape used to wrap the threaded ends of pipe to provide a leak-free connection. Plated steel, 3/8 in QC x MNPT, 0.10 lb.

Valley Industries PK-85300104 Plug, 3/8 in Connection, Quick Connect x FNPT, Steel, Plated

Forney 75134 Plug, 1/4 in Connection, Quick Connect Plug x MNPT, Steel

Forney 75136 Plug, 3/8 in Connection, Quick Connect Plug x MNPT, Steel

Suggested Retail: $4.79

Suggested Retail: $4.99

Plated steel, 3/8 in QC x FNPT, 0.10 lb. Forney Plug, 1/4 in Connection, Quick Connect Plug x MNPT Connection, Steel, 5500 psi Pressure 3/8 in (9.52 mm), plated steel quick connect plug x 3/8 in MNPT. Used in combination with quick couplers anywhere high pressure connections are frequently assembled and disassembled. Ideal for quick exchange of spray nozzles and spray guns. These quick connect plugs connect to all of the most common pressure washer equipment in the industry, 4200 psi.

Forney 75137 Plug, 3/8 in Connection, Quick Connect Plug x FNPT, Steel

Forney 75150 Soap Nozzle, 65 deg Angle, 1/4 in Nozzle, Brass

Forney 75155 Flushing Nozzle, 25 deg Angle, 1/4 in Nozzle, Stainless Steel

Suggested Retail: $4.99

Suggested Retail: $5.99

3/8 in (9.52 mm), plated steel quick connect plug x 3/8 in FNPT. Used in combination with quick couplers anywhere high pressure connections are frequently assembled and disassembled. Ideal for quick exchange of spray nozzles and spray guns. These quick connect plugs connect to all of the most common pressure washer equipment in the industry, 4200 psi. Forney Soap Nozzle, 1/4 in Nozzle, 4 mm Orifice, 65 deg Angle, 4000 psi Pressure, Brass, Black Forney Flushing Nozzle, 1/4 in Nozzle, 4.5 mm Orifice, 25 deg Angle, 4000 psi Pressure, Stainless Steel, Green

Forney 75156 Washing Nozzle, 40 deg Angle, 1/4 in Nozzle, Stainless Steel

Forney 75157 Blasting Nozzle, 1/4 in Nozzle, Stainless Steel

Forney 75110 Pressure Washer Reducer, 3/8 x 1/4 in Connection, MNPT x FNPT, Brass

Suggested Retail: $5.99

Forney Washing Nozzle, 1/4 in Nozzle, 4.5 mm Orifice, 40 deg Angle, 4000 psi Pressure, Stainless Steel, White Forney Blasting Nozzle, 1/4 in Nozzle, 4.5 mm Orifice, 4000 psi Pressure, Stainless Steel, Red Brass 3/8 in MNPT to 1/4 in FNPT reducer/adapter. Reduces 3/8 in MNPT connections to 1/4 in FNPT connections. Ideal for connecting dissimilar sized pressure washer equipment.

Forney 75152 Chiseling Spray Nozzle, 15 deg Angle, Quick-Connect, Stainless Steel

Forney 75158 High-Pressure Nozzle, 25 deg Angle, Quick Change, Stainless Steel

Forney 75159 High-Pressure Nozzle, 15 deg Angle, Stainless Steel

Suggested Retail: $5.99

Stainless steel chiseling (yellow color-coded) pressure washer spray nozzle with 4 mm orifice and 1/4 in (6.35 mm) Quick-Connect (QC) plug. Chiseling (yellow) QC spray nozzles have a 15 deg spray pattern for intense cleaning of unpainted hard surfaces such as grills, driveways, concrete or brick walkways or unpainted brick or stucco. The spray gun should be directed at a 45 deg angle to the surface and be used like a scraper to remove paint, grease and dirt. The orifice size of the nozzle determines the operating pressure of the end user's machine. Generally, the smaller the orifice, the greater the restriction of water flowing through the pressure washer. This causes the pressure to increase. Choosing a nozzle with too large an orifice will reduce operating pressure. Choosing a nozzle with too small of an orifice will limit water flow and possibly create an excessive load on the pressure washer. Determining the correct spray nozzle orifice size is dependent on the gallons per minute (gpm) and pressure per square inch (psi) ratings of the pressure washer being used. As a general rule, QC spray nozzles with 4 mm orifices work excellent on pressure washers-rated between 500 psi with 1.4 gpm (low end) to 8000 psi with 5.7 gpm (high-end). For pressure washers in-between the low end and high-end, the recommended orifice size is roughly proportional from low end to high-end. The spray nozzle is designed to easily connect to a 1/4 in (6.35 mm) QC coupler and is ideal for quick exchange of spray nozzles and spray guns. It connects to all of the most common pressure washer equipment in the industry. Ideal for quick exchange of spray nozzles and spray guns. The spray should be directed at a 45 deg angle to the surface and be used like a scraper to remove paint, grease and dirt. Connects to all of the most common pressure washer equipment in the industry. The spray should be directed at a 45 deg angle to the surface and be used like a scraper to remove paint, grease and dirt. Ideal for surface preparation, cleaning windows, gutters and downspouts or cleaning bugs from trucks.

Forney 75162 High-Pressure Nozzle, 0 deg Angle, Stainless Steel

Forney 75163 Blasting Spray Nozzle, 0 deg Angle, Quick-Connect, Stainless Steel

Forney 75164 Flushing Spray Nozzle, 25 deg Angle, Quick-Connect, Stainless Steel

Suggested Retail: $5.99

The spray should be directed at a 45 deg angle to the surface and be used like a scraper to remove paint, grease and dirt. Ideal for washing aluminum siding, cleaning windows, washing vehicles or spraying sidewalks, driveways and patios. Stainless steel blasting (red color-coded) pressure washer spray nozzle with 4 mm orifice and 1/4 in (6.35 mm) Quick-Connect (QC) plug. Blasting (red) QC spray nozzles have a powerful 0 deg pinpoint spray pattern for spot cleaning of hard, unpainted surfaces such as metal and concrete or for high reach areas. They are ideal for removing weeds from sidewalk cracks, stubborn mineral stains and chewing gum from concrete, masonry, aluminum and steel, caked mud from equipment and cleaning lawn mower undersides. Do not use blasting QC spray nozzles on wood. The orifice size of the nozzle determines the operating pressure of the end user's machine. Generally, the smaller the orifice, the greater the restriction of water flowing through the pressure washer. This causes the pressure to increase. Choosing a nozzle with too large an orifice will reduce operating pressure. Choosing a nozzle with too small of an orifice will limit water flow and possibly create an excessive load on the pressure washer. Determining the correct spray nozzle orifice size is dependent on the gallons per minute (gpm) and pressure per square inch (psi) ratings of the pressure washer being used. As a general rule, QC spray nozzles with 4 mm orifices work excellent on pressure washers-rated between 500 psi with 1.4 gpm (low end) to 8000 psi with 5.7 gpm (high-end). For pressure washers in-between the low end and high-end, the recommended orifice size is roughly proportional from low end to high-end. The spray nozzle is designed to easily connect to a 1/4 in (6.35 mm) QC coupler and is ideal for quick exchange of spray nozzles and spray guns. It connects to all of the most common pressure washer equipment in the industry. Stainless steel flushing (green color-coded) pressure washer spray nozzle with 4 mm orifice and 1/4 in (6.35 mm) Quick-Connect (QC) plug. Flushing (green) QC spray nozzles have a 25 deg spray pattern for standard cleaning for most applications, including yard tools, sidewalks, lawn furniture, unpainted siding, stucco, gutters and eaves, concrete, and brick surfaces. Ideal for sweeping leaves from walks, curbs and driveways, cleaning stable floors, washing swimming pool bottoms, cleaning barbecue grills, etc. The orifice size of the nozzle determines the operating pressure of the end user's machine. Generally, the smaller the orifice, the greater the restriction of water flowing through the pressure washer. This causes the pressure to increase. Choosing a nozzle with too large an orifice will reduce operating pressure. Choosing a nozzle with too small of an orifice will limit water flow and possibly create an excessive load on the pressure washer. Determining the correct spray nozzle orifice size is dependent on the gallons per minute (gpm) and pressure per square inch (psi) ratings of the pressure washer being used. As a general rule, QC spray nozzles with 4 mm orifices work excellent on pressure washers-rated between 500 psi with 1.4 gpm (low end) to 8000 psi with 5.7 gpm (high-end). For pressure washers in-between the low end and high-end, the recommended orifice size is roughly proportional from low end to high-end. The spray nozzle is designed to easily connect to a 1/4 in (6.35 mm) QC coupler and is ideal for quick exchange of spray nozzles and spray guns. It connects to all of the most common pressure washer equipment in the industry.

Valley Industries PK-14000005 Screw Plug, 3/8 in Connection, FNPT

Forney 75114 Screw Nipple, M22 x 1/4 in Connection, Male x FNPT

Forney 75115 Screw Nipple, M22 x 1/4 in Connection, Male x MNPT

Suggested Retail: $6.99

M22 x 1-1/2 thread. Forney Screw Nipple, M22 x 1/4 in Connection, Male x FNPT Connection, 5800 psi Pressure, 300 deg F, Suitable for: 1/4 in Male, Female Fittings Forney Screw Nipple, M22 x 1/4 in Connection, Male x MNPT Connection, 5800 psi Pressure, 300 deg F, Suitable for: 1/4 in Male, Female Fittings

Forney 75116 Screw Nipple, M22 x 3/8 in Connection, Male x FNPT

Forney 75117 Screw Nipple, M22 x 3/8 in Connection, Male x MNPT

Forney 75123 Quick Coupler, 1/4 x M22 in Connection, FNPT

Suggested Retail: $6.99

Forney Screw Nipple, M22 x 3/8 in Connection, Male x FNPT Connection, 5800 psi Pressure, 300 deg F, Suitable for: 3/8 in Male, Female Fittings Forney Screw Nipple, M22 x 3/8 in Connection, Male x MNPT Connection, 5800 psi Pressure, 300 deg F, Suitable for: 3/8 in Male, Female Fittings Forney Quick Coupler, 1/4 x M22 in Connection, FNPT Connection, 5800 psi Pressure, 300 deg F

Forney 75127 Quick Coupler, 1/4 in Connection, FNPT, Brass

Forney 75153 Chiseling Nozzle, 15 deg Angle, 1/4 in Nozzle, 4.5 mm Orifice, Stainless Steel

Forney 75118 Long Screw Nipple, M22 x 1/4 in Connection, Male x FNPT

Suggested Retail: $6.99

Forney Quick Coupler, 1/4 in Connection, FNPT Connection, Brass, 5500 psi Pressure Forney Chiseling Nozzle, 1/4 in Nozzle, 4.5 mm Orifice, 15 deg Angle, 4000 psi Pressure, Stainless Steel, Yellow Forney Long Screw Nipple, M22 x 1/4 in Connection, Male x FNPT Connection, 5800 psi Pressure, 300 deg F, Suitable for: 1/4 in Male, Female Fittings

Forney 75129 Coupler, 3/8 in Connection, FNPT

Forney 75192 O-Ring, 3/8 in ID

Mi-T-M AW-0017-0006 Adapter, 3/8 x 3/8 in Connection, Quick-Connect Plug x FNPT, Stainless Steel, Zinc

Suggested Retail: $7.59

Suggested Retail: $7.99

3/8 in (9.52 mm) brass socket quick coupler x 3/8 in FNPT, 4200 psi. Used anywhere high pressure connections are frequently assembled and disassembled and are ideal for quick exchange of spray nozzles and spray guns. Knurling on the socket sleeve allows for easy use. The ball lock design insures a solid connection every time. These quick couplers connect to all of the most common pressure washer equipment in the industry (cold water only). Forney O-Ring, 3/8 in ID, Suitable for: Forney #75128, #75129, 3/8 in Socket Quick Couplers 3/8 female x 3/8 in plug.


	1 2 3 ... 6