MASONRY BITS

Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > POWER DRILLING & ACCESSORIES > MASONRY BITS

Sort By:

1 2

Vulcan 260261OR Drill Bit, 1/8 in Dia, 2-1/2 in OAL, Spiral Flute, Straight Shank

Vulcan 260341OR Drill Bit, 3/16 in Dia, 4 in OAL, Spiral Flute, Straight Shank

Vulcan 260501OR Drill Bit, 1/4 in Dia, 4 in OAL, Spiral Flute, Straight Shank

Suggested Retail: $2.79

Suggested Retail: $2.79

Suggested Retail: $3.29

Positive tip geometry for best rotary drilling efficiency. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. Positive tip geometry for best rotary drilling efficiency. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. Positive tip geometry for best rotary drilling efficiency. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block.

Irwin 61108 Drill Bit, 1/8 in Dia, 3 in OAL, Spiral Flute, 1-Flute, 1/8 in Dia Shank, Straight Shank

Irwin 61116 Drill Bit, 1/4 in Dia, 4 in OAL, Spiral Flute, 1-Flute, 1/4 in Dia Shank, Straight Shank

Vulcan 272941OR Drill Bit, 5/16 in Dia, 6 in OAL, Spiral Flute, Straight Shank

Suggested Retail: $3.99

Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Positive tip geometry for best rotary drilling efficiency. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block.

Avanti Pro PMAPC1010 Drill Bit, 1/8 in Dia, 3 in OAL, Percussion, 2-Flute, 10 mm Dia Shank, Straight Shank

Avanti Pro PMAPC1020 Drill Bit, 5/32 in Dia, 3 in OAL, Percussion, 2-Flute, 10 mm Dia Shank, Straight Shank

Vulcan 223811OR Drill Bit, 3/8 in Dia, 6 in OAL, Spiral Flute, Straight Shank

Suggested Retail: $3.99

Suggested Retail: $4.59

Suggested Retail: $4.79

Avanti Pro Drill Bit, Percussion, 1/8 in Diameter, 2 Flutes, Straight Shank, 10 mm Shank Diameter, Carbide Cutting Edge, 3 in Overall Length, Applicable Materials: Brick/Block, Concrete, Masonry, Suitable for: Cordless and Corded Rotary Drills Avanti Pro Drill Bit, Percussion, 5/32 in Diameter, 2 Flutes, Straight Shank, 10 mm Shank Diameter, Carbide Cutting Edge, 3 in Overall Length, Applicable Materials: Brick/Block, Concrete, Masonry, Suitable for: Cordless and Corded Rotary Drills Positive tip geometry for best rotary drilling efficiency. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block.

Avanti Pro PMAPC1030 Drill Bit, 3/16 in Dia, 4 in OAL, Percussion, 2-Flute, 10 mm Dia Shank, Straight Shank

Vulcan 260931OR Drill Bit, 1/2 in Dia, 6 in OAL, Spiral Flute, Straight Shank

Avanti Pro PMAPC1040 Drill Bit, 1/4 in Dia, 6 in OAL, Percussion, 2-Flute, 10 mm Dia Shank, Straight Shank

Suggested Retail: $4.99

Suggested Retail: $5.99

Avanti Pro Drill Bit, Percussion, 3/16 in Diameter, 2 Flutes, Straight Shank, 10 mm Shank Diameter, Carbide Cutting Edge, 4 in Overall Length, Applicable Materials: Brick/Block, Concrete, Masonry, Suitable for: Cordless and Corded Rotary Drills Positive tip geometry for best rotary drilling efficiency. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. Avanti Pro Drill Bit, Percussion, 1/4 in Diameter, 2 Flutes, Straight Shank, 10 mm Shank Diameter, Carbide Cutting Edge, 6 in Overall Length, Applicable Materials: Brick/Block, Concrete, Masonry, Suitable for: Cordless and Corded Rotary Drills

Avanti Pro PMAPC1050 Drill Bit, 3/8 in Dia, 6 in OAL, Percussion, 2-Flute, 10 mm Dia Shank, Straight Shank

Skil MDB5103 Masonry Drill Bit, 1/4 in Dia, 5 in OAL, Dual Flute, 2-Flute, 1/4 in Dia Shank, Hex Shank

Avanti Pro PMAPC1060 Drill Bit, 1/2 in Dia, 6 in OAL, Percussion, 2-Flute, 10 mm Dia Shank, Straight Shank

Suggested Retail: $5.99

Suggested Retail: $6.49

Avanti Pro Drill Bit, Percussion, 3/8 in Diameter, 2 Flutes, Straight Shank, 10 mm Shank Diameter, Carbide Cutting Edge, 6 in Overall Length, Applicable Materials: Brick/Block, Concrete, Masonry, Suitable for: Cordless and Corded Rotary Drills Set anchors, drill pilot holes, and power through brick, cinder block, concrete, and other masonry with the Skil 1/4 in. Carbide-tipped masonry drill bit. This 1/4 in masonry drill bit features a dual-cutting carbide tip that optimizes drilling speed while retaining its edge. The bit features a split point tip optimized for speed and precision while dual flutes allow for fast debris removal without slowing or bogging down when cutting through brick and concrete. The masonry bit can be used in both hammer and rotary modes. Its 1/4 in hex shank provides superior grip with a three-jaw chuck or typical hammer drill while allowing compatibility with impact drivers. Heat-treated for extra strength, the shank and body allow the bit to withstand the abuse of drilling through masonry like block, concrete, and more when used in hammer mode. The bit is clearly labeled with bold print so it can be easily identified - no straining to read a tiny hairline imprint. Power through your next masonry project confidently with the Skil 1/4 in. Carbide-tipped masonry drill bit. Avanti Pro Drill Bit, Percussion, 1/2 in Diameter, 2 Flutes, Straight Shank, 10 mm Shank Diameter, Carbide Cutting Edge, 6 in Overall Length, Applicable Materials: Brick/Block, Concrete, Masonry, Suitable for: Cordless and Corded Rotary Drills

Tapcon 11256 Drill Bit, 5/32 in Dia, 3-1/2 in OAL, 5/32 in Dia Shank, Straight Shank

Irwin 61124 Drill Bit, 3/8 in Dia, 4 in OAL, Spiral Flute, 1-Flute, 1/4 in Dia Shank, Straight Shank

Tapcon 11248 Drill Bit, 3/16 in Dia, 4-1/2 in OAL, 3/16 in Dia Shank, Straight Shank, Climaseal

Suggested Retail: $6.99

Suggested Retail: $7.59

Carbide tip used to drill pilot holes when installing anchors or 3/16 in tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion-resistance. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Carbide tip used to drill pilot holes when installing anchors or 3/16 in tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion-resistance.

Tapcon 11257 Drill Bit, 3/16 in Dia, 3-1/2 in OAL, 3/16 in Dia Shank, Straight Shank

Tapcon 11247 Drill Bit, 5/32 in Dia, 4-1/2 in OAL, 5/32 in Dia Shank, Straight Shank, Climaseal

Tapcon 11362 Drill Bit, 3/16 in Dia, 5-1/2 in OAL, 3/16 in Dia Shank, Straight Shank

Suggested Retail: $7.59

Suggested Retail: $7.99

Carbide tip used to drill pilot holes when installing anchors or 3/16 in Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Carbide tip used to drill pilot holes when installing anchors or 3/16 in tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion-resistance. Carbide tip used to drill pilot holes when installing anchors or 3/16 in tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion-resistance.

Simpson Strong-Tie Titen Turbo MDB15312C1 Drill Bit, 5/32 in Dia, 3-1/2 in OAL

Simpson Strong-Tie Titen Turbo MDB15412C1 Drill Bit, 5/32 in Dia, 4-1/2 in OAL

Simpson Strong-Tie Titen Turbo MDB15512C1 Drill Bit, 5/32 in Dia, 5-1/2 in OAL

Suggested Retail: $7.99

Titen Turbo? screw drill bits enable pre-drilling and installation of concrete and masonry screws. The bits work with the Titen installation tool and also with drills with a standard, three-jaw-style chuck. These 3/16 and 5/32 in Dia drill bits are available in 3-1/2, 4-1/2 and 5-1/2 in L. Titen Turbo? screw drill bits enable pre-drilling and installation of concrete and masonry screws. The bits work with the Titen installation tool and also with drills with a standard, three-jaw-style chuck. These 3/16 and 5/32 in Dia drill bits are available in 3-1/2, 4-1/2 and 5-1/2 in L. Titen Turbo? screw drill bits enable pre-drilling and installation of concrete and masonry screws. The bits work with the Titen installation tool and also with drills with a standard, three-jaw-style chuck. These 3/16 and 5/32 in Dia drill bits are available in 3-1/2, 4-1/2 and 5-1/2 in L.

Simpson Strong-Tie Titen Turbo MDB18312C1 Drill Bit, 3/16 in Dia, 3-1/2 in OAL

Simpson Strong-Tie Titen Turbo MDB18412C1 Drill Bit, 3/16 in Dia, 4-1/2 in OAL

Simpson Strong-Tie Titen Turbo MDB18512C1 Drill Bit, 3/16 in Dia, 5-1/2 in OAL

Suggested Retail: $7.99

Vulcan 261151OR Drill Bit, 5/8 in Dia, 6 in OAL, Spiral Flute, Straight Shank

Irwin 61132 Drill Bit, 1/2 in Dia, 4 in OAL, Spiral Flute, 1-Flute, 1/4 in Dia Shank, Straight Shank

Vulcan 261231OR Drill Bit, 3/4 in Dia, 6 in OAL, Spiral Flute, Straight Shank

Suggested Retail: $8.99

Suggested Retail: $9.99

Suggested Retail: $14.99

Positive tip geometry for best rotary drilling efficiency. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Positive tip geometry for best rotary drilling efficiency. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block.


	1 2