PERCUSSION BITS

Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > POWER DRILLING & ACCESSORIES > PERCUSSION BITS - LONG

Sort By:

1 2

Bosch Bulldog HC4C2001 Hammer Drill Bit, 5/32 in Dia, 6 in OAL, Standard Flute, 4-Flute, 13/32 in Dia Shank, SDS-Plus Shank

DEWALT DW5226 Hammer Drill Bit, 1/4 in Dia, 12 in OAL, Percussion, Spiral Flute, 4-Flute, 1/4 in Dia Shank, Flat Shank

DEWALT DW5229 Hammer Drill Bit, 5/16 in Dia, 12 in OAL, Percussion, 4-Flute, 5/16 in Dia Shank, Flat Shank

Suggested Retail: $6.49

Suggested Retail: $8.99

Suggested Retail: $10.99

Bosch Bulldog Hammer Drill Bit, 5/32 in Dia, Flute Type: Standard, Number of Flutes: 4, Flute Length: 4 in, Shank Type: SDS-Plus, Quick Change Shank: No, Shank Diameter: 13/32 in, Point Type: Centering, Cutting Edge Material: Carbide, Carbide, Bright, 6 in OAL, Applicable Materials: Concrete, Hard Stone, Lime and Sand Brick, Reinforced Concrete, Solid Brick, Suitable for: SDS-Plus Tough Rotary Hammers Power through masonry, concrete, rock and more with DeWALT? hammer drill bits. Featuring rock carbide tips that maximize surface contact for extended bit life and a 4-flute design that cleans debris while you work. Three flats on the shank eliminate bit slippage. Power through masonry, concrete, rock and more with DeWALT? hammer drill bits. Featuring rock carbide tips that maximize surface contact for extended bit life and a 4-flute design that cleans debris while you work. Three flats on the shank eliminate bit slippage.

DEWALT DW5231 Hammer Drill Bit, 3/8 in Dia, 12 in OAL, Percussion, Spiral Flute, 4-Flute, 3/8 in Dia Shank, Flat Shank

DEWALT DW5236 Hammer Drill Bit, 1/2 in Dia, 12 in OAL, Percussion, Spiral Flute, 4-Flute, 3/8 in Dia Shank, Flat Shank

Diablo SPEEDemon DMARG1090 Hammer Drill Bit, 1/4 in Dia, 12 in OAL, Percussion, 10 mm Dia Shank, SDS Shank

Suggested Retail: $11.99

Suggested Retail: $13.99

Suggested Retail: $14.99

Power through masonry, concrete, rock and more with DeWALT? hammer drill bits. Featuring rock carbide tips that maximize surface contact for extended bit life and a 4-flute design that cleans debris while you work. Three flats on the shank eliminate bit slippage. Power through masonry, concrete, rock and more with DeWALT? hammer drill bits. Featuring rock carbide tips that maximize surface contact for extended bit life and a 4-flute design that cleans debris while you work. Three flats on the shank eliminate bit slippage. Diablo's SPEEDemon ? Red Granite Carbide Tipped Hammer Drill Bit range provides one of the fastest and longest lasting drilling solutions on the market for concrete, masonry and stone. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill fast, accurate holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes. This range is Impact Strong? for increased shank stability and durability in cordless and corded impact and drill drivers. This range delivers extreme durability in cordless and corded impact and drill drivers.

Irwin 5026011 Rotary Hammer Drill Bit, 3/8 in Dia, 13 in OAL, Percussion, Spiral Flute, 1-Flute, 3/8 in Dia Shank

Bosch BlueGranite Turbo HCBG08T Hammer Drill Bit, 1/4 in Dia, 12 in OAL, Milled Flute, 2-Flute, 1/4 in Dia Shank

Milwaukee SHOCKWAVE Impact Duty 48-20-9012 Drill Bit, 1/4 in Dia, 12 in OAL, Wide Flute, 1/4 in Dia Shank, 3-Flat Shank

Suggested Retail: $15.99

Nickel-plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal, 7/16 in and larger drill bits have reduced shanks. Bosch BlueGranite Turbo? carbide hammer drill bits deliver 5X life and 2X speed over standard masonry bits, resulting in increased on-the-job productivity. Each bit delivers an aggressive hold in the hammer drill achieved with the power grip shank. The bit features an upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Our Shockwave? Impact-duty? carbide hammer drill bits are designed with sharpened carbide to deliver up to 9X longer life and 4X faster drilling into concrete. Engineered with a precision ground tip, these bits deliver faster starts and less walking in concrete, brick and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a 1/4 in hex shank, Milwaukee? Shockwave? Impact-duty? carbide hammer drill bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers.

DEWALT DW5242 Hammer Drill Bit, 5/8 in Dia, 12 in OAL, Percussion, Spiral Flute, 4-Flute, 1/2 in Dia Shank, Flat Shank

Diablo SPEEDemon DMARG1130 Hammer Drill Bit, 3/8 in Dia, 12 in OAL, Percussion, 10 mm Dia Shank, SDS Shank

Irwin 326007 Rotary Hammer Drill Bit, 1/4 in Dia, 12 in OAL, Percussion, Twist Flute, 2-Flute, 1/4 in Dia Shank

Suggested Retail: $16.99

Suggested Retail: $17.99

Power through masonry, concrete, rock and more with DeWALT? hammer drill bits. Featuring rock carbide tips that maximize surface contact for extended bit life and a 4-flute design that cleans debris while you work. Three flats on the shank eliminate bit slippage. Diablo's SPEEDemon ? Red Granite Carbide Tipped Hammer Drill Bit range provides one of the fastest and longest lasting drilling solutions on the market for concrete, masonry and stone. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill fast, accurate holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes. This range is Impact Strong? for increased shank stability and durability in cordless and corded impact and drill drivers. This range delivers extreme durability in cordless and corded impact and drill drivers. Bit will fit all hammer drills with three-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat-resistance. All tips made to ANSI specifications.

Milwaukee SHOCKWAVE Impact Duty 48-20-9022 Drill Bit with Power Tip, 3/8 in Dia, 12 in OAL, Wide Flute, 3/8 in Dia Shank

DEWALT DW5245 Hammer Drill Bit, 3/4 in Dia, 12 in OAL, Percussion, Spiral Flute, 4-Flute, 1/2 in Dia Shank, Flat Shank

Diablo SPEEDemon DMARG1160 Hammer Drill Bit, 1/2 in Dia, 12 in OAL, Percussion, 10 mm Dia Shank, SDS Shank

Suggested Retail: $17.99

Suggested Retail: $19.99

Our Shockwave? Impact-duty? carbide hammer drill bits are designed with sharpened carbide to deliver up to 9X longer life and 4X faster drilling into concrete. The POWER TIP?, available in sizes 3/8 in and above, is designed with dynamic cutting edges and a chip breaker for increased productivity and easier drilling from start to finish. Engineered with precision ground carbide, these bits deliver faster starts and less walking in concrete, brick and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a 1/4 in hex shank, Milwaukee? Shockwave? Impact-duty? carbide hammer drill bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers. Power through masonry, concrete, rock and more with DeWALT? hammer drill bits. Featuring rock carbide tips that maximize surface contact for extended bit life and a 4-flute design that cleans debris while you work. Three flats on the shank eliminate bit slippage. Diablo's SPEEDemon ? Red Granite Carbide Tipped Hammer Drill Bit range provides one of the fastest and longest lasting drilling solutions on the market for concrete, masonry and stone. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill fast, accurate holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes. This range is Impact Strong? for increased shank stability and durability in cordless and corded impact and drill drivers. This range delivers extreme durability in cordless and corded impact and drill drivers.

Diablo SPEEDemon DMARG1180 Hammer Drill Bit, 5/8 in Dia, 12 in OAL, Percussion, 10 mm Dia Shank, SDS Shank

Milwaukee SHOCKWAVE Impact Duty 48-20-9031 Drill Bit with Power Tip, 1/2 in Dia, 12 in OAL, Wide Flute, 3/8 in Dia Shank

Bosch Turbo HCBG19T Hammer Drill Bit, 9/16 in Dia, 10 in OAL, Milled U Flute, 3-Flute, 5/16 in Dia Shank

Suggested Retail: $21.99

Suggested Retail: $22.99

Diablo's SPEEDemon ? Red Granite Carbide Tipped Hammer Drill Bit range provides one of the fastest and longest lasting drilling solutions on the market for concrete, masonry and stone. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill fast, accurate holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes. This range is Impact Strong? for increased shank stability and durability in cordless and corded impact and drill drivers. This range delivers extreme durability in cordless and corded impact and drill drivers. Our Shockwave? Impact-duty? carbide hammer drill bits are designed with sharpened carbide to deliver up to 9X longer life and 4X faster drilling into concrete. The POWER TIP?, available in sizes 3/8 in and above, is designed with dynamic cutting edges and a chip breaker for increased productivity and easier drilling from start to finish. Engineered with precision ground carbide, these bits deliver faster starts and less walking in concrete, brick and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a 1/4 in hex shank, Milwaukee? Shockwave? Impact-duty? carbide hammer drill bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers. Bosch BlueGranite Turbo? carbide hammer drill bits deliver 5X life and 2X speed over standard masonry bits, resulting in increased on the job productivity. Each bit delivers an aggressive hold in the hammer drill achieved with the power-grip shank. The bit features an upgraded four grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete.

Irwin 326012 Rotary Hammer Drill Bit, 3/8 in Dia, 12 in OAL, Percussion, Twist Flute, 2-Flute, 3/8 in Dia Shank

Bosch BlueGranite Turbo HCBG18T Hammer Drill Bit, 1/2 in Dia, 12 in OAL, Milled Flute, 2-Flute, 5/16 in Dia Shank

Bosch BlueGranite Turbo HCBG21T Hammer Drill Bit, 5/8 in Dia, 12 in OAL, Milled Flute, 2-Flute, 3/8 in Dia Shank

Suggested Retail: $22.99

Suggested Retail: $23.99

Suggested Retail: $24.99

Bit will fit all hammer drills with three-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat-resistance. All tips made to ANSI specifications. Bosch BlueGranite Turbo? carbide hammer drill bits deliver 5X life and 2X speed over standard masonry bits, resulting in increased on-the-job productivity. Each bit delivers an aggressive hold in the hammer drill achieved with the power grip shank. The bit features an upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Bosch BlueGranite Turbo? carbide hammer drill bits deliver 5X life and 2X speed over standard masonry bits, resulting in increased on-the-job productivity. Each bit delivers an aggressive hold in the hammer drill achieved with the power grip shank. The bit features an upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete.

Milwaukee 48-20-9041 Drill Bit with Power Tip, 5/8 in Dia, 12 in OAL, Wide Flute, 3/8 in Dia Shank, 3-Flat Shank

Irwin 326016 Rotary Hammer Drill Bit, 1/2 in Dia, 12 in OAL, Percussion, Twist Flute, 2-Flute, 1/2 in Dia Shank

Irwin 326020 Rotary Hammer Drill Bit, 5/8 in Dia, 12 in OAL, Percussion, Twist Flute, 2-Flute, 5/8 in Dia Shank

Suggested Retail: $24.99

Suggested Retail: $26.99

Our carbide hammer drill bits are designed with sharpened carbide to deliver up to 9X longer life and 4X faster drilling into concrete. The POWER TIP?, available in sizes 3/8 in and above, is designed with dynamic cutting edges and a chip breaker for increased productivity and easier drilling from start to finish. Engineered with precision ground carbide, these bits deliver faster starts and less walking in concrete, brick and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a three-flat Secure Grip? shank, Milwaukee? carbide hammer drill bits are the ideal solution for drilling in masonry materials with hammer drills/drivers. Bit will fit all hammer drills with three-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat-resistance. All tips made to ANSI specifications. Bit will fit all hammer drills with three-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat-resistance. All tips made to ANSI specifications.

Diablo SPEEDemon DMARG1200 Hammer Drill Bit, 3/4 in Dia, 12 in OAL, Percussion, 10 mm Dia Shank, SDS Shank

DEWALT DW5219 Drill Bit, 7/8 in Dia, 12 in OAL, Percussion, Premium, 4-Flute, 1/2 in Dia Shank, Round Shank

Milwaukee 48-20-9046 Drill Bit with Power Tip, 3/4 in Dia, 12 in OAL, Wide Flute, 3/8 in Dia Shank, 3-Flat Shank

Suggested Retail: $27.99

Suggested Retail: $29.99

Diablo's SPEEDemon ? Red Granite Carbide Tipped Hammer Drill Bit range provides one of the fastest and longest lasting drilling solutions on the market for concrete, masonry and stone. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill fast, accurate holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes. This range is Impact Strong? for increased shank stability and durability in cordless and corded impact and drill drivers. This range delivers extreme durability in cordless and corded impact and drill drivers. The percussion bits line features brazed carbide tips that help drill through soft, porous concrete easily while the round shank provides a secure grip in common hammer drills. Our carbide hammer drill bits are designed with sharpened carbide to deliver up to 9X longer life and 4X faster drilling into concrete. The POWER TIP?, available in sizes 3/8 in and above, is designed with dynamic cutting edges and a chip breaker for increased productivity and easier drilling from start to finish. Engineered with precision ground carbide, these bits deliver faster starts and less walking in concrete, brick and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a three-flat Secure Grip? shank, Milwaukee? carbide hammer drill bits are the ideal solution for drilling in masonry materials with hammer drills/drivers.

Diablo SPEEDemon DMARG1210 Hammer Drill Bit, 1 in Dia, 12 in OAL, Percussion, 10 mm Dia Shank, SDS Shank

Bosch BlueGranite Turbo HCBG23T Hammer Drill Bit, 3/4 in Dia, 12 in OAL, Milled Flute, 2-Flute, 3/8 in Dia Shank

Bosch BlueGranite Turbo HCBG25T Hammer Drill Bit, 7/8 in Dia, 12 in OAL, Milled Flute, 2-Flute, 3/8 in Dia Shank

Suggested Retail: $31.99

Suggested Retail: $33.99

Suggested Retail: $34.99

Diablo's SPEEDemon ? Red Granite Carbide Tipped Hammer Drill Bit range provides one of the fastest and longest lasting drilling solutions on the market for concrete, masonry and stone. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill fast, accurate holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes. This range is Impact Strong? for increased shank stability and durability in cordless and corded impact and drill drivers. This range delivers extreme durability in cordless and corded impact and drill drivers. Bosch BlueGranite Turbo? carbide hammer drill bits deliver 5X life and 2X speed over standard masonry bits, resulting in increased on-the-job productivity. Each bit delivers an aggressive hold in the hammer drill achieved with the power grip shank. The bit features an upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Bosch BlueGranite Turbo? carbide hammer drill bits deliver 5X life and 2X speed over standard masonry bits, resulting in increased on-the-job productivity. Each bit delivers an aggressive hold in the hammer drill achieved with the power grip shank. The bit features an upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete.


	1 2