|
Vulcan 227991OR Auger Drill Bit, 1/2 in Dia, Spiral Flute, 1-Flute, Hex Shank
|
|
Vulcan 227801OR Auger Drill Bit, 3/8 in Dia, Spiral Flute, 1-Flute, Hex Shank
|
|
Vulcan 228101OR Auger Drill Bit, 5/8 in Dia, Spiral Flute, 1-Flute, Hex Shank
|
|
|
|
|
|
|
|
|
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material.
|
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material.
|
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material.
|
|
|
|
Irwin Speedbor 3041015 Auger Boring Bit, 7/16 in Dia, 6 in OAL, Tapered Flute, 3-Flute, 1/4 in Dia Shank, Hex Shank
|
|
Vulcan 228291OR Auger Drill Bit, 3/4 in Dia, Spiral Flute, 1-Flute, Hex Shank
|
|
Irwin Speedbor 3041002 Auger Boring Bit, 5/8 in Dia, 6 in OAL, Tapered Flute, 3-Flute, 1/4 in Dia Shank, Hex Shank
|
|
|
|
|
|
|
|
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest Speedbor? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick change chucks, including impact drills.
|
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material.
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest Speedbor? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick change chucks, including impact drills.
|
|
|
|
Irwin Speedbor 3041001 Auger Boring Bit, 1/2 in Dia, 6 in OAL, Tapered Flute, 3-Flute, 1/4 in Dia Shank, Hex Shank
|
|
Irwin Speedbor 3041014 Auger Boring Bit, 9/16 in Dia, 6 in OAL, Tapered Flute, 3-Flute, 1/4 in Dia Shank, Hex Shank
|
|
Irwin Speedbor 3041016 Auger Boring Bit, 11/16 in Dia, 6 in OAL, Tapered Flute, 3-Flute, 1/4 in Dia Shank, Hex Shank
|
|
|
|
|
|
|
|
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest Speedbor? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick change chucks, including impact drills.
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest Speedbor? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick change chucks, including impact drills.
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest Speedbor? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick change chucks, including impact drills.
|
|
|
|
Milwaukee 48-13-0048 Auger Drill Bit, 1/2 in Dia, 6-1/2 in OAL, 1/4 in Dia Shank, Hex Shank
|
|
Irwin Speedbor 3041004 Auger Boring Bit, 3/4 in Dia, 6 in OAL, Tapered Flute, 3-Flute, 1/4 in Dia Shank, Hex Shank
|
|
Irwin Speedbor 3041017 Auger Boring Bit, 13/16 in Dia, 6 in OAL, Tapered Flute, 3-Flute, 1/4 in Dia Shank, Hex Shank
|
|
|
|
|
|
|
|
|
Milwaukee 1/2 x 6 in SPEED FEED? wood bits let you drill up to 10X faster than flat boring bits. These self-feeding wood bits feature double-wing spurs for drilling fast holes in clean wood. The feed screw and dual cutting edges permit fast cutting of clean holes that are ideal for feeding wire or bolts.
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest Speedbor? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick change chucks, including impact drills.
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest Speedbor? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick change chucks, including impact drills.
|
|
|
|
Irwin Speedbor 3041007 Auger Boring Bit, 1 in Dia, 6 in OAL, Tapered Flute, 3-Flute, 1/4 in Dia Shank, Hex Shank
|
|
Irwin Speedbor 3041005 Auger Boring Bit, 7/8 in Dia, 6 in OAL, Tapered Flute, 3-Flute, 1/4 in Dia Shank, Hex Shank
|
|
Vulcan 228531OR Auger Drill Bit, 1 in Dia, Spiral Flute, 1-Flute, Hex Shank
|
|
|
|
|
|
|
|
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest Speedbor? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick change chucks, including impact drills.
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest Speedbor? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick change chucks, including impact drills.
|
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material.
|
|
|
|
Irwin Speedbor 3041009 Auger Boring Bit, 1-1/4 in Dia, 6 in OAL, Tapered Flute, 3-Flute, 1/4 in Dia Shank, Hex Shank
|
|
Irwin I-100 Series 49904 Power Drill Auger Bit, 1/4 in Dia, 7-1/2 in OAL, Solid Center Flute, 1-Flute, Hex Shank
|
|
Irwin I-100 Series 49905 Power Drill Auger Bit, 5/16 in Dia, 7-1/2 in OAL, Solid Center Flute, 1-Flute, Hex Shank
|
|
|
|
|
|
|
|
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
|
|
|
Irwin I-100 Series 49906 Power Drill Auger Bit, 3/8 in Dia, 7-1/2 in OAL, Solid Center Flute, 1-Flute, Hex Shank
|
|
Irwin I-100 Series 49907 Power Drill Auger Bit, 7/16 in Dia, 7-1/2 in OAL, Solid Center Flute, 1-Flute, Hex Shank
|
|
Irwin I-100 Series 49908 Power Drill Auger Bit, 1/2 in Dia, 7-1/2 in OAL, Solid Center Flute, 1-Flute, Hex Shank
|
|
|
|
|
|
|
|
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
|
|
|
Irwin I-100 Series 49909 Power Drill Auger Bit, 9/16 in Dia, 7-1/2 in OAL, Solid Center Flute, 1-Flute, Hex Shank
|
|
Irwin I-100 Series 49910 Power Drill Auger Bit, 5/8 in Dia, 7-1/2 in OAL, Solid Center Flute, 1-Flute, Hex Shank
|
|
Milwaukee 48-13-0058 Auger Drill Bit, 5/8 in Dia, 6-1/2 in OAL, 1/4 in Dia Shank, Hex Shank
|
|
|
|
|
|
|
|
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Milwaukee 5/8 x 6 in SPEED FEED? wood bits let you drill up to 10X faster than flat boring bits. These self-feeding wood bits feature double-wing spurs for drilling fast holes in clean wood. The feed screw and dual cutting edges permit fast cutting of clean holes that are ideal for feeding wire or bolts.
|
|
|
|
Diablo DAG1010 2-Step Auger Drill Bit, 1/4 in Dia, 7-1/2 in OAL, Deep Flute
|
|
Irwin 49911 Power Drill Auger Bit, 11/16 in Dia, 7-1/2 in OAL, Solid Center Flute, 1-Flute, 5/16 in Dia Shank
|
|
Irwin I-100 Series 49912 Power Drill Auger Bit, 3/4 in Dia, 7-1/2 in OAL, Solid Center Flute, 1-Flute, Hex Shank
|
|
|
|
|
|
|
|
|
Diablo 2-Step Auger Drill Bit, 1/4 in Diameter, Deep Flute, Self-Feed Point, 7-1/2 in Overall Length, Applicable Materials: Wood, Suitable for: Cordless and Corded Impact and Drill Drivers
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
|
|
|
Irwin Speedbor 3041018 Auger Boring Bit, 15/16 in Dia, 6 in OAL, Tapered Flute, 3-Flute, 1/4 in Dia Shank, Hex Shank
|
|
Milwaukee 48-13-0068 Auger Drill Bit, 3/4 in Dia, 6-1/2 in OAL, 1/4 in Dia Shank, Hex Shank
|
|
Milwaukee 48-13-0078 Auger Drill Bit, 7/8 in Dia, 6-1/2 in OAL, 1/4 in Dia Shank, Hex Shank
|
|
|
|
|
|
|
|
|
The Irwin Speedbor? MAX SPEED? wood drilling bit is the fastest Speedbor? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick hange chucks, including impact drills.
|
Milwaukee 3/4 x 6 in SPEED FEED? wood bits let you drill up to 10X faster than flat boring bits. These self-feeding wood bits feature double-wing spurs for drilling fast holes in clean wood. The feed screw and dual cutting edges permit fast cutting of clean holes that are ideal for feeding wire or bolts.
|
Milwaukee 7/8 x 6 in SPEED FEED? wood bits let you drill up to 10X faster than flat boring bits. These self-feeding wood bits feature double-wing spurs for drilling fast holes in clean wood. The feed screw and dual cutting edges permit fast cutting of clean holes that are ideal for feeding wire or bolts.
|
|
|
