|
Kreg DDS Driver Combo
|
|
Kreg SML-C2 - 50 Pocket-Hole Screw, #8 Thread, 2 in L, Coarse Thread, Square Drive, Carbon Steel, Zinc, 50/PK
|
|
General S838 Drill Stop Set, Steel, Black Oxide
|
|
|
|
|
|
|
|
|
All Kreg? drivers feature a solid one-piece construction, magnetic tip and Kreg? quick-change chuck compatibility for fast and easy bit changes. This combo includes one 3 in (76 mm) square driver and one 6 in (152 mm) square driver. The 6 in version offers the most flexibility and ease of use for your projects. The 3 in version is HANDy when you are working in tight spots where the 6 in driver can't reach.
|
Kreg? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote? and stainless screw varieties.
|
The #S838 drill stops, six assorted prevent excessive penetration of twist and brad point drill bits.
|
|
|
|
Kreg D6HD Drive Bit, #3 Drive, Square Drive, 1/4 in Shank, Hex Shank, 6 in L
|
|
Kreg SML-C250-50 Pocket-Hole Screw, #8 Thread, 2-1/2 in L, Coarse Thread, Square Drive, Carbon Steel, 50/PK
|
|
Kreg SPS-F1 100 Pocket-Hole Screw, #6 Thread, 1 in L, Fine Thread, Pan Head, Square Drive, Steel, Zinc-Plated, 100
|
|
|
|
|
|
|
|
|
6 in driver with deep #3 square drive. Optimized for use with Kreg Jig HD screws. All of our drivers feature a solid, one-piece construction, magnetic tip and Kreg quick-change chuck compatibility for fast and easy bit changes.
|
Kreg? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote? and stainless screw varieties.
|
Kreg? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote? and stainless screw varieties.
|
|
|
|
Kreg SML-C1 - 100 Screw, 1 in L, Coarse Thread, Maxi-Loc Head, Square Drive, Self-Drilling Point, Steel, Zinc, 100 PK
|
|
Kreg SML-F125 - 100 Pocket-Hole Screw, #7 Thread, 1-1/4 in L, Fine Thread, Maxi-Loc Head, Square Drive, Carbon Steel
|
|
Kreg SML-C125 - 100 Pocket-Hole Screw, #8 Thread, 1-1/4 in L, Square Drive, Carbon Steel, Coarse Thread, Maxi-Loc Head
|
|
|
|
|
|
|
|
|
Kreg zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
Kreg? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote? and stainless screw varieties.
|
Kreg? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote? and stainless screw varieties.
|
|
|
|
Kreg SML-C150 - 100 Pocket-Hole Screw, #8 Thread, 1-1/2 in L, Square Drive, Coarse Thread, Maxi-Loc Head, Carbon Steel
|
|
Kreg SPS-C1 - 100 Pocket-Hole Screw, #7 Thread, 1 in L, Coarse Thread, Pan Head, Square Drive, Steel, Zinc, 100 PK
|
|
Kreg SML-C2X250-30 Pocket-Hole Screw, #14 Thread, 2-1/2 in L, Coarse Thread, Washer Head, Square Drive, Steel, 30 PK
|
|
|
|
|
|
|
|
|
Kreg? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote? and stainless screw varieties.
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
For use with the Kreg Jig HD and 1-1/2 in and larger stock. Large 2-1/2 in long #14 hardened steel screws provide ideal shear resistance as well as a Protec-Kote finish with 3 anti-corrosion layers for long term moisture resistance.
|
|
|
|
Kreg Blue-Kote SML-C2B-50 Pocket-Hole Screw, #8 Thread, 2 in L, Coarse Thread, Maxi-Loc Head, Square Drive, 50/PK
|
|
Porter-Cable 5561 Joining Biscuit, #10, Beechwood, Brown
|
|
Porter-Cable 5562 Joining Biscuit, #20, Beechwood, Brown
|
|
|
|
|
|
|
|
|
Blue-Kote? screws feature three anti-corrosion layers, making them the ideal choice for a wide variety of indoor and outdoor projects. Blue-Kote? screws provide rust resistance up to 400% greater than zinc-plated screws and work with pressure-treated material.
|
Use for joints where strength is critical. Biscuits swell in joints for maximum strength.
|
Our No 20 plate joiner biscuits are made of the best wood laminate for stability, strength and fit. They are designed to fit slots cut by all standard plate jointers. Biscuits swell when used with water-based glues to lock and strengthen the joint.
|
|
|
|
Kreg Blue-Kote SML-C150B-100 Pocket-Hole Screw, #8 Thread, 1-1/2 in L, Coarse Thread, Maxi-Loc Head, Square Drive, Steel
|
|
Kreg SPS-F125-100 Pocket-Hole Screw, #6 Thread, 1-1/4 in L, Fine Thread, Pan Head, Square Drive, Steel, Zinc, 100 PK
|
|
Kreg KDG-6000 Drilling Guide, Steel
|
|
|
|
|
|
|
|
|
Blue-Kote??? screws feature three anti-corrosion layers, making them the ideal choice for a wide variety of indoor and outdoor projects. Blue-Kote??? screws provide rust resistance up to 400% greater than zinc-plated screws and work with pressure-treated material.
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
The Kreg drilling guide makes it easy to create perfectly straight holes without using a drill press. You can get precisely positioned holes with just a hand drill. Featuring six hardened steel drill guides from 1/8 to 1/2 in that do the work of holding your drill in position for you. The Guide features an ergonomic design and Kreg GripMaxx? material that ensure it stays in place as you use it, so your drill bit won't wander off your mark as you start the hole. The drilling guide also automatically centers on the edge of 3/4 in wide and 1/2 in wide boards and plywood, so you can drill holes that are perpendicular to the edge and perfectly centered. Use the drill guide for all kinds of tasks whether you need a hole for driving a screw, mounting hardware, helping create a dowel joint and much more.
|
|
|
|
Kreg SML-F150-100 Pocket-Hole Screw, #7 Thread, 1-1/2 in L, Fine Thread, Maxi-Loc Head, Square Drive, Steel, Zinc
|
|
Kreg Blue-Kote SML-C250B-50 Pocket-Hole Screw, #8 Thread, Coarse Thread, Square Drive, Carbon Steel, 50/PK
|
|
Kreg Blue-Kote SML-C125B-100 Pocket-Hole Screw, #8 Thread, 1-1/4 in L, Coarse Thread, Maxi-Loc Head, Square Drive, Steel
|
|
|
|
|
|
|
|
|
Kreg?? zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote??? and stainless screw varieties.
|
Features 3 anti-corrosion layers, allowing them to be used for indoor and outdoor applications.
|
Blue-Kote??? screws feature three anti-corrosion layers, making them the ideal choice for a wide variety of indoor and outdoor projects. Blue-Kote??? screws provide rust resistance up to 400% greater than zinc-plated screws and work with pressure-treated material.
|
|
|
|
DEWALT DW6804 Plate Joining Biscuit, Beech Wood
|
|
DEWALT DW6825 Biscuit, #20, Beech Wood
|
|
DEWALT DW6815 Biscuit, #10, Beech Wood
|
|
|
|
|
|
|
|
|
The DW6804 tube of 150 #0 size biscuits are manufactured to the highest industry standards with 100% compressed beech to deliver great joint strength.
|
The DW6825 tube of 100 #20 size biscuits are manufactured to the highest industry standards with 100% compressed beech to deliver great joint strength.
|
The DW6815 tube of 125 #10 size biscuits are manufactured to the highest industry standards with 100% compressed beech to deliver great joint strength.
|
|
|
|
Irwin 43906 Plug Cutter, 3/8 in Dia Cutter, 1/4 in Dia Shank, Carbon Steel
|
|
Irwin 43904 Plug Cutter, 1/4 in Dia Cutter, 1/4 in Dia Shank, Carbon Steel
|
|
Irwin 43908 Plug Cutter, 1/2 in Dia Cutter, 1/4 in Dia Shank, Carbon Steel
|
|
|
|
|
|
|
|
|
Made of hardened, HCS for strength and durability when working in applications such as covering fastener holes in furniture, cabinetry, floors, decks or making dowels. Shank of size 1/4 in.
|
Made of hardened, HCS for strength and durability when working in applications such as covering fastener holes in furniture, cabinetry, floors, decks or making dowels. Shank of size 1/4 in.
|
Made of hardened, HCS for strength and durability when working in applications such as covering fastener holes in furniture, cabinetry, floors, decks or making dowels. Shank of size 1/4 in.
|
|
|
|
Irwin 43910 Plug Cutter, 5/8 in Dia Cutter, 1/4 in Dia Shank, Carbon Steel
|
|
Kreg P-OAK Pocket Hole Plug, 19/64 in Dia, Oak Wood
|
|
Kreg P-PNT Pocket Hole Plug, 19/64 in Dia, Solid Wood
|
|
|
|
|
|
|
|
|
Made of hardened, HCS for strength and durability when working in applications such as covering fastener holes in furniture, cabinetry, floors, decks or making dowels. Shank of size 1/4 in.
|
Use to hide or decoratively accent exposed pocket-holes. Works with materials from 1/2 to 1-1/2 in thick.
|
Use to hide or decoratively accent exposed pocket-holes. Works with materials from 1/2 to 1-1/2 in thick.
|
|
|
