|
Bosch 85285 Router Bit, 1/4 in Dia Cutter, 1-1/2 in OAL, 1/4 in Dia Shank, 1-Cutter, Carbide
|
|
Freud 66-100 Series Router Bit, 3/16 in Dia, 1-1/2 in OAL, 1/4 in Dia Shank, Carbide
|
|
FLUSH TRIM ROUTER BIT
|
|
|
|
|
|
|
|
|
Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. Single flute trim bit allows for a faster feed rate. Solid carbide gives best rigidity and long life.
|
The 41 Series Bits provide a range of bevels from 8 to 45 deg and feature a ball bearing guide.
|
Self piloting feature eliminates the expense and upkeep of a ball bearing assembly. Cut all plastic laminates. Use on portable routers and laminate trimmers for trimming plastic laminate.
|
|
|
|
Freud 26-100 Router Bit, 1/4 in Dia Cutter, 2-1/4 in OAL, 1/4 in Dia Shank, 1-Cutter, Carbide
|
|
2FLUTE STRAIGHT ROUTER BIT
|
|
Freud 04-102 Router Bit, 3/16 in Dia Cutter, 2 in OAL, 1/4 in Dia Shank, 2-Cutter, Carbide
|
|
|
|
|
|
|
|
|
Drill through point allows self starting, while the pilot will act as a guide for template work. Cuts all composition materials, plywood, hardwood and softwood. Use on portable routers for template work.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
|
|
|
Freud 04-111 Router Bit, 7/32 in Dia Cutter, 2 in OAL, 1/4 in Dia Shank, 2-Cutter, Carbide
|
|
Freud 04-104 Router Bit, 1/4 in Dia Cutter, 2 in OAL, 1/4 in Dia Shank, 2-Cutter, Carbide
|
|
Freud 04-120 Double Flute Straight Bit, 3/8 in Dia Cutter, 7/8 in L Cutting, 1-7/8 in OAL, 1/4 in Dia Shank, 2-Cutter
|
|
|
|
|
|
|
|
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Freud's huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general-purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for use in CNC, hand held and table-mounted routers.
|
|
|
|
1/4 2FLUTE STRAIGHT ROUTER BIT
|
|
Freud 04-101 Double Flute Straight Bit, 5/32 in Dia Cutter, 5/8 in L Cutting, 1-1/2 in OAL, 1/4 in Dia Shank, 2-Cutter
|
|
Dremel MAX Series 9951 Power Carving Bit, 11/32 in Dia, 1.4 in L, 1/8 in Dia Shank, Stainless Steel
|
|
|
|
|
|
|
|
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Freud's huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general-purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for use in CNC, hand held and table-mounted routers.
|
Dremel MAX accessories are the highest performing and most innovative rotary accessories delivering proven performance to give DIYers longer lasting, stronger performing, versatile accessories. Dremel MAX's power carving bits carve out material 2X faster for maximum efficiency. The 9951's 11/32 in Dia ball shaped power carving bit is engineered to rapidly remove material 2X faster than the 114. The 9951 can both aggressively remove material and smooth the workpiece to a finish ready for final sanding. The 9951's design makes wood carving feel effortless and allows for easy cutting with the grain and across the grain. The power carving bit's hardened stainless steel teeth allow for aggressive carving and high-material removal rates in wood, plastic, foam and rubber while providing resistance to rust and corrosion.
|
|
|
|
Dremel MAX Series 9952 Power Carving Bit, 1/4 in Dia, 1.79 in L, 1/8 in Dia Shank, Stainless Steel
|
|
Dremel 9953 Power Carving Bit, 3/8 in Dia, 1.62 in L, 1/8 in Dia Shank, Stainless Steel
|
|
Dremel MAX Series 9954 Power Carving Bit, 5/16 in Dia, 1.58 in L, 1/8 in Dia Shank, Stainless Steel
|
|
|
|
|
|
|
|
|
Dremel MAX accessories are the highest performing and most innovative rotary accessories delivering proven performance to give DIYers longer lasting, stronger performing, versatile accessories. Dremel MAX's power carving bits carve out material 2X faster for maximum efficiency. The 9952's 1/4 in small taper shaped power carving bit is engineered to rapidly remove material 2X faster than the 9910. The 9952 can both aggressively remove material and smooth the workpiece to a finish ready for final sanding. The 9952's design makes wood carving feel effortless and allows for easy cutting with the grain and across the grain. The power carving bit's hardened stainless steel teeth allow for aggressive carving and high-material removal rates in wood, plastic, foam and rubber while providing resistance to rust and corrosion.
|
Dremel? Max accessories are the highest performing and most innovative rotary accessories delivering proven performance to give DIYers longer lasting, stronger performing, versatile accessories. Dremel? MAX's power carving bits carve out material 2X faster for maximum efficiency. The 9953's 3/8 in flame shaped power carving bit is engineered to rapidly remove material 2X faster than the 124. The 9953 can both aggressively remove material and smooth the work piece to a finish ready for final sanding. The 9953's design makes wood carving feel effortless and allows for easy cutting with the grain and across the grain. The power carving bit's hardened stainless steel teeth allow for aggressive carving and high material removal rates in wood, plastic, foam and rubber while providing resistance to rust and corrosion.
|
Dremel MAX accessories are the highest performing and most innovative rotary accessories delivering proven performance to give DIYers longer lasting, stronger performing, versatile accessories. Dremel MAX's power carving bits carve out material 2X faster for maximum efficiency. The 9954's 5/16 in ball nose shaped power carving bit is engineered to rapidly remove material 2X faster than the 117. The 9954 can both aggressively remove material and smooth the workpiece to a finish ready for final sanding. The 9954's design makes wood carving feel effortless and allows for easy cutting with the grain and across the grain. The power carving bit's hardened stainless steel teeth allow for aggressive carving and high-material removal rates in wood, plastic, foam and rubber while providing resistance to rust and corrosion.
|
|
|
|
2FLUTE STRAIGHT ROUTER BIT
|
|
2FLUTE STRAIGHT ROUTER BIT
|
|
Bosch 85225MC Router Bit, 3/8 in Dia Cutter, 2-1/4 in OAL, 1/4 in Dia Shank, 2-Cutter, Steel
|
|
|
|
|
|
|
|
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Double flute allows for a better finish in harder materials, while carbide tip incorporates the wear resistance of carbide and the toughness of a steel body. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
Bosch 85269MC Router Bit, 3/8 in Dia Cutter, 2-1/8 in OAL, 1/4 in Dia Shank, 2-Cutter, Steel
|
|
Bosch 85268MC Router Bit, 3/8 in Dia Cutter, 2-5/8 in OAL, 1/4 in Dia Shank, 2-Cutter, Steel
|
|
Freud 04-110 Router Bit, 1/4 in Dia Cutter, 2-7/8 in OAL, 1/4 in Dia Shank, 2-Cutter, Carbide
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. Double flute trim bit allows for a smoother finish. The fully-hardened and tempered steel shank provides ultimate durability.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. Double flute trim bit allows for a smoother finish. The fully-hardened and tempered steel shank provides ultimate durability.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
|
|
|
Bosch 85227MC Router Bit, 1/2 in Dia Cutter, 2-1/4 in OAL, 1/4 in Dia Shank, 2-Cutter, Carbide
|
|
Bosch 84300MC Router Bit, 3/8 in Dia Cutter, 7/16 in L Cutting, 1-5/8 in OAL, 1/4 in Dia Shank, 2-Cutter, Steel
|
|
Freud 42-100 Bearing Flush Trim Bit, 3/8 in Dia Cutter, 2-13/16 in OAL, 1/4 in Dia Shank, 2-Cutter, Carbide
|
|
|
|
|
|
|
|
|
Micrograin bits designed to give excellent smoothness of cut and balanced cutting with minimal vibration. Positive hook angles cut efficiently while specially designed tips provide fast plunge cutting. Strong webbing and heavy cutter backing extend bit life.
|
Bosch carbide-tipped router bits deliver precision and durability. They feature premium-quality micro grain carbide tips that are engineered with a special heat treating process for an extra-fine finish. The tips provide maximum sharpness and edge retention. The fully hardened and tempered steel shanks provide ultimate durability. These bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a excellent finish.
|
|
|
|
Freud 42-106 Flush Trim Bit, 1/2 in Dia Cutter, 2-1/8 in OAL, 1/4 in Dia Shank, 2-Cutter, Carbide
|
|
Bosch 85230MC Router Bit, 5/8 in Dia Cutter, 2 in OAL, 1/4 in Dia Shank, 2-Cutter, Steel
|
|
Freud 18-104 Router Bit, 1/4 in Dia Cutter, 2 in OAL, 1/4 in Dia Shank, Carbide
|
|
|
|
|
|
|
|
|
Freud's flush trim bit range includes bits for any trimming application. Use these bits for precise trim work on laminate counter tops, to follow patterns to create or duplicate intricate shapes or for any task requiring a clean cut-off along a flush edge with a smooth, burn-free cut. Use on hardwood, softwood, plywood, composites and laminates on hand held or table mounted routers. Two flute bits provide faster cutting and three flutes yield a superior finish.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Double flute allows for a better finish in harder materials, while carbide tip incorporates the wear resistance of carbide and the toughness of a steel body. The fully-hardened and tempered steel shank provides ultimate durability.
|
Produces many different styles of fluted millwork or use to cut decorative designs in cabinet door. Ideal bit for making signs. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. No 18-106, 3/16 in large radius. No 18-108, 1/4 in large radius.
|
|
|
|
Freud 04-108 Router Bit, 1/4 in Dia Cutter, 2-1/2 in OAL, 1/4 in Dia Shank, 2-Cutter, Carbide
|
|
Freud 04-132 Router Bit, 1/2 in Dia Cutter, 2-1/8 in OAL, 1/4 in Dia Shank, 2-Cutter, Carbide
|
|
RH DOVETAIL ROUTER BIT
|
|
|
|
|
|
|
|
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Bits will work with many popular dovetailing jigs. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers. 14 degree angle.
|
|
|
