|
Metabo HPT N3804AB3 Stapler, 1/4 in W Crown, 1/2 to 1-1/2 in L Leg, Narrow Crown Staple, 125 Magazine, 70 cu-ft Air
|
|
Senco LS61H1P/SLS18MG Pneumatic Finish Stapler, 1/4 in W Crown, 110 Magazine, 2.4 scfm Air
|
|
Bostitch SX1838K Stapler Kit, 7/32 in W Crown, 1/2 to 1-1/2 in L Leg, Narrow Crown Staple, 100 Magazine, 160 in-lb Air
|
Suggested Retail: $139.99
|
|
|
Suggested Retail: $149.99
|
|
|
Suggested Retail: $179.99
|
|
|
|
|
|
|
New selective actuation switch lets the user easily select bump fire or sequential fire modes. Lightweight and compact with 360 deg adjustable exhaust and elastomer grip. Tool-less, easy-to-clear nose and depth of drive. Weighs 2.2 lb, dimension of 10-11/32 in L x 2-3/8 in W x 9-1/8 in H. Air pressure is 70 to 120 psi, steel magazine, top nail loading type, single-contact-selector firing mode. Comes with no-mar tip, depth adjustment, adjustable exhaust port, rubber grip and jam clearing. Does not free from oil. Fastener has nail range of 1/2 to 1-1/2 in, staple capacity is 125. Includes safety glasses, Case and no-mar tipx2.
|
The LS61H1P is an 18 ga finish stapler that drives 1/4 in crown staples from 3/8 to 1-1/2 in L. Convenience features like SENCO's oil-less design eliminates the need for routine lubrication. This stapler is ideal for woodworking, cabinetry and both internal and external trim applications.
|
This 18 ga finish stapler kit requires little maintenance. Choose between sequential and contact operation with selectable trigger system. Depend on this finish stapler kit for efficiency and convenience.
|
|
|
|
DEWALT DWFP1838 Stapler, 1/4 in W Crown, 1/2 to 1-1/2 in L Leg, 100 Magazine
|
|
Metabo HPT N3804A5 Narrow Crown PRO Finish Stapler, 1/4 in W Crown, A5 Crown Staple, 100 Staples Magazine
|
|
Senco 820103N Stapler, 1/4 in W Crown, 3/8 to 1-1/2 in L Leg, 168 Magazine, 1.92 cu-ft Air
|
Suggested Retail: $179.99
|
|
|
Suggested Retail: $199.99
|
|
|
Suggested Retail: $379.99
|
|
|
|
|
|
|
Long life maintenance-free motor helps to keep from staining the work surface. Selectable trigger sequential or contact actuation. Top load magazine. Rear exhaust to keep contaminates away from work. Tool-free depth-of-drive adjustment from proper setting of staples. Low staple lockout alerts when to reload. Pressure rating of 70 to 120 psi. Tool weighs only 3 lb.
|
The N3804A5 18 ga narrow crown PRO finish stapler has been designed with the professional carpenter and industrial plant applications in mind. It can drive 18 ga, 1/4 in crown staples ranging from 1/2 to 1-1/2 in length. The integrated air duster is easily operated allowing the user to quickly clear any dust or debris from the work surface. The high-grade steel magazine and all metal, key component constructions ensures this tool will stay operational and provide significantly less down-time. The left or right side -mountable belt hook helps keep the tool at your side at all times. The N3804A5 for when only the excellent will do.
|
Senco Stapler, 1/4 in Air Inlet, 1.92 cu-ft Air Consumption, 75 to 120 psi Air, 168 Magazine, Firing Mode: Contact Actuation, 1/4 in Crown Width, 3/8 to 1-1/2 in Leg Length, Aluminum Housing Material, Gray/Red, Dimensions: 12 in L x 2 in W x 9 in H, Includes: No-Mar Pad
|
|
|
