|
National Hardware N193-839 Round Rail End Cap, Steel, Galvanized
|
|
Prime-Line N 6796 Closet Guide, Nylon/Steel, Floor Mounting
|
|
National Hardware N235-309 Bar Holder, 6.31 in L x 1.5 in W x 0.29 in D Dimensions, Steel, Zinc
|
|
|
|
|
|
|
|
|
With bolt, nut and washer. Pack loose.
|
N 6796 is a bi-pass floor guide used primarily on Johnson Hardware closet doors. It has a stamped steel floor base with adjusting slots for the nylon guides to fit into. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors. If a shim is needed see N 6795 carpet riser to accommodate the height of the carpet.
|
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot-rolled steel.
|
|
|
|
National Hardware N235-291 Bar Holder, 6.38 in L x 1.5 in W x 1.6 in H Dimensions, Steel, Zinc
|
|
National Hardware N351-503 Bar Holder, 6.29 in L x 1.5 in W x 1.6 in D Dimensions, Steel
|
|
National Hardware N351-502 Bar Holder, 6.38 in L x 1.5 in W x 1.6 in H Dimensions, Steel
|
|
|
|
|
|
|
|
|
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot-rolled steel.
|
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot-rolled steel.
|
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot-rolled steel.
|
|
|
|
National Hardware N104-349 Box Rail Bracket, 2-1/4 in W x 2 in D x 4-19/32 in H Dimensions, Steel, Galvanized
|
|
National Hardware N100-834 Door Bumper, Steel, Zinc
|
|
National Hardware N104-612 Triangle Bracket, Steel, Galvanized
|
|
|
|
|
|
|
|
|
Designed as a support bracket for Stanley's 105270, 105676, 105213 and 105726 box rail at 24 in OC intervals. Includes lags. Display packed.
|
Designed for use as a door stop on up to 2 in thick sliding doors. Embossed steel for added strength. Display packed.
|
Designed to support double run of #5114 or #5116 box rail. Suitable for use on corrugated metal siding due to narrow surface. Does not come with rail bracket or fasteners. Can be used as double stop when used with #6008 door stop. 300 lb. Safe working load.
|
|
|
|
National Hardware N104-364 Box Rail Bracket, 2-1/4 in L x 2 in W x 4-5/8 in H Dimensions, 300 lb, Steel, Galvanized
|
|
National Hardware N100-007 Round Rail Splice Bracket, 2-13/16 in W x 2 in D x 4-5/16 in H Dimensions, Steel, Zinc
|
|
National Hardware N100-875 Stay Roller, 2.01 in Dia Roller, 1.126 in W Roller, Delrin/Steel
|
|
|
|
|
|
|
|
|
National Hardware Box Rail Bracket, Single, 300 lb Weight, Dimensions: 2-1/4 in L x 2 in W x 4-5/8 in H, Steel, Galvanized, Suitable for: #5114, #5116 Box Rail
|
Designed to be used with #5400 round rail to join and hold two lengths of rail together. Includes lag bolt and spice screws. Splice screws are inserted in holes at the end of round rail. Safe working load 300 lb.
|
Without screws. Each loose.
|
|
|
|
National Hardware N104-380 Box Rail Splice Bracket, 2-1/4 in W x 2 in D x 4-5/8 in H Dimensions, Steel, Galvanized
|
|
National Hardware N131-490 Stay Roller, Delrin/Galvanized Steel
|
|
National Hardware 1264 Series N161-760 Jamb Latch, Steel, Zinc
|
|
|
|
|
|
|
|
|
Designed to join two pieces of Stanley's 105270, 105676, 105213 and 105726 box rail. Meets ANSI/BHMA A 156.14. Includes lags.
|
Designed for use as a heavy-duty guide on large, sliding doors up to 3-3/4 in thick. Slots in frame provide adjustment for holding doors against wood walls or posts. Delrin wheel is reversible; it can be used either side of frame. Offers sturdy steel frame construction. Meets ANSI/BHMA A 156.14. Roller is adjustable. Includes nail and lag screw holes. Hardened steel bolt for greater strength. Display packed.
|
Designed to hold wood and metal doors firmly in place against the door jamb on farm and utility buildings. It also can be used for end gates on stake trucks. Offers 7 in hook. Designed for right- or left-hand applications. Pre-punched, reversible strike plate for use on 1-1/2 in or 3-1/2 in thick door frames. Boxed.
|
|
|
|
National Hardware 1265 Series N160-754 Jamb Latch, Steel, Zinc
|
|
National Hardware N196-360 Box Rail Truck, Steel, Zinc
|
|
BOX RAIL END CAP UNIVERSAL GLV - Case of 10
|
|
|
|
|
|
|
|
|
Boxed.
|
Packed with wheel trucks only. Durable one piece, precision formed steel. Comes with self-lubricating Delrin bearings. Suitable for use with No 59, 5100, 5103, 5104, 5105, 5110, 5114 or 5116 box rail. 225 lb/hanger safe working load, 2.14 in diameter. 4.15 in L x 3 in W x 1.61 in D. Standards: BHMA A138.18 specified.
|
Designed to press into rail to keep rail free of foreign materials from birds or weather. Can be used as center stop using 3/8 x 2 in carriage bolts (not furnished). Often packed with box hangers.
|
|
|
|
National Hardware COLORmaxx Series N104-059 Single Axle Box Rail Hanger, Steel, Zinc
|
|
National Hardware 1254 Series N185-447 Barn Door Latch, Steel, Zinc
|
|
BRACKET CEILING GALVANIZED - Case of 2
|
|
|
|
|
|
|
|
|
National Hardware COLORmaxx Single Axle Box Rail Hanger, Specifications: 150 Safe Working Load, Steel, Zinc, Dimensions: 3.12 in L x 2.149 in W x 1.5 in H
|
Designed for bi-parting wood sliding doors at least 1-1/2 in THK. Cam action and adjustable hook holds doors tightly together. Pre-punched, reversible strike plate for use on 1-1/2 in or 3-1/2 in THK door frames. 15 in L hook. Boxed.
|
National Hardware Box Rail Bracket, Galvanized Steel, Dimensions: 4-7/8 in L x 1-1/2 in W x 3-15/32 in H, Suitable for: #5114 or #5116 Box Rail, Includes: (2) Lag Bolts
|
|
|
|
Stanley Hardware N112-144 Box Rail Truck, 225 lb, Steel, Zinc
|
|
National Hardware N105-676 Box Rail, Steel, Galvanized, 1-57/64 in W, 2-13/32 in H, 6 ft L
|
|
National Hardware N112-227 Box Rail Hanger, Steel, Zinc
|
|
|
|
|
|
|
|
|
Stanley Hardware Box Rail Truck, 225 lb Weight, Steel, Zinc, Suitable for: #5100, #5103, #5104, #5105, #5110, #5114, #5116 Box Rails
|
Designed for use on doors weighing up to 450 lb. Rail drilled 24 in OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels.
|
National Hardware Box Rail Hanger, Steel, Zinc, Suitable for: #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 Box Rail, Includes: Connecting Bolt and Nuts, Truck
|
|
|
|
National Hardware N112-250 Rail Hanger, 6 in, 225 lb, Steel, Zinc
|
|
National Hardware N112-185 Box Rail Hanger, 4.49 in L x 1.61 in D x 4.72 in H Dimensions, Delrin/Steel, Zinc
|
|
National Hardware N181-461 Rail Hanger, 2.14 in Dia Roller, 1.61 in W Roller, Steel, 300 lb
|
|
|
|
|
|
|
|
|
National Hardware Rail Hanger, 6 in, 225 lb Weight, Dimensions: 2 in L x 3 in W x 2 in H, Steel, Zinc, Suitable for: Model #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 Box Rail, Includes: Truck, Connecting Bolt, Nuts
|
Designed for use with box rail. For use with #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 box rail. Includes truck, connecting bolt and nuts. Packed without end caps. Made of durable one-piece, precision-formed steel. Comes with self-lubricating Delrin bearings. Safe working load - 225 lb per hanger. 2.14 in roller diameter. 4-1/2 in bolt length, 4.49 in overall length, 1.61 in overall height. BHMA A138.18.
|
National Hardware Rail Hanger, 300 lb Weight, Bearing Type: Roller, Roller Width: 1.61 in, Roller Diameter: 2.14 in, Shaft Diameter: 0.42 in, Steel, Zinc, Dimensions: 5.38 in L x 4.51 in W x 1.61 in H, Suitable for: #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 Box Rails
|
|
|
|
National Hardware N174-268 Box Rail Hanger, 1.61 in D x 11.14 in H Dimensions, Steel
|
|
National Hardware N112-102 Box Rail Hanger, Single, Steel, Zinc
|
|
BRACKET BARN DOOR TRACK GALV - Case of 10
|
|
|
|
|
|
|
|
|
Designed for use on wood-frame, metal-clad doors using a 2 x 4 in or 2 x 6 in frame with Stanley's 105270, 105676, 105213 and 105726 box rail. Includes two washers, 4 hex nuts and two end caps per pair. Made of durable one-piece, precision-formed steel. Offers self-lubricating Delrin bearings. The 1/2 in offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 7 in adjusted laterally 1 in by turning offset bolt for desired clearance. Can hold 450 lb per pair. 9 in bolt. Boxed.
|
Rigid with single door strap. Designed for use on wood-frame sliding doors from 1-1/2 in to 2 in thick. Slot in top of door strap allows lateral and vertical adjustment. 450 pound capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings. Boxed.
|
With slots for 5120 flashings. Boxed loose.
|
|
|
