|
Prime-Line N 6796 Closet Guide, Nylon/Steel, Floor Mounting
|
|
National Hardware N100-834 Door Bumper, Steel, Zinc
|
|
National Hardware N100-875 Stay Roller, 2.01 in Dia Roller, 1.126 in W Roller, Delrin/Steel
|
|
|
|
|
|
|
|
|
N 6796 is a bi-pass floor guide used primarily on Johnson Hardware closet doors. It has a stamped steel floor base with adjusting slots for the nylon guides to fit into. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors. If a shim is needed see N 6795 carpet riser to accommodate the height of the carpet.
|
Designed for use as a door stop on up to 2 in thick sliding doors. Embossed steel for added strength. Display packed.
|
Without screws. Each loose.
|
|
|
|
National Hardware N131-490 Stay Roller, Delrin/Galvanized Steel
|
|
National Hardware 322 Series N131-565 Door Guide, Steel, Zinc
|
|
BUMPER BARN DOOR ZINC PLATED - Case of 5
|
|
|
|
Suggested Retail: $149.99
|
|
|
|
|
|
|
Designed for use as a heavy-duty guide on large, sliding doors up to 3-3/4 in thick. Slots in frame provide adjustment for holding doors against wood walls or posts. Delrin wheel is reversible; it can be used either side of frame. Offers sturdy steel frame construction. Meets ANSI/BHMA A 156.14. Roller is adjustable. Includes nail and lag screw holes. Hardened steel bolt for greater strength. Display packed.
|
Designed for single sliding or bi-parting metal or wood doors. Intended to take abuse from trucks, tractors and farm machinery when used around factory and farm buildings. Smooth ramp on each side of the guide prevents cutting tractor or truck tires. Mounts on concrete floors with lag screws and shields or on a 6 in x 6 in post. 1/2 in rod or bolt inserted through hole in each side will serve as a center stop for bi-parting doors. Meets ANSI/BHMA, A 156.14. Manufactured from hot-rolled steel. Boxed.
|
Adjustable from 2-1/2 in to 3-1/8 in. Pack loose.
|
|
|
