WATERPROOFERS & SEALERS

Home > PAINT & SUNDRIES > PAINT & STAINS > WATERPROOFERS & SEALERS

Choose a sub category:

CONCRETE SEALERS	MULTI-SURFACE SEALERS
MASONRY WATERPROOFERS	FOUNDATION COATINGS

Sort By:

1 2 3

Thompson's WaterSeal TH.10100-18 Multi-Surface Waterproofing Spray, Clear, 12 oz Aerosol Can

Thompson's WaterSeal TH.024104-14 Multi-Surface Waterproofing Stain, Clear, 1 qt Can

Damtite 01071 Powder Waterproofer, White, Powder, 7 lb Pail

Suggested Retail: $8.99

Suggested Retail: $13.99

Suggested Retail: $39.99

Convenient waterproofing spray that provides proven waterproofing protection for wood, concrete and brick. Proven to waterproof wood, concrete and brick. Use as a wood sealer, brick sealer or for concrete waterproofing. A Portland cement-based, waterproofing coating for sealing, protecting & decorating wall sand surfaces constructed of poured concrete, concrete, cinder block, masonry, stone, brick or stucco. Safe coating for sealing the inside of drinking water concrete tanks and cisterns. Eliminates dampness, resists mold, mildew & flaking, chalking while beautifying and sealing all pores & voids. Unlike ready-mix paints which can only be applied to dry surfaces, this product is made for use on wet or dry surfaces. It also reduces Radon gas infiltration. Wear protective gloves and goggles.

Zinsser 369381 Waterproofing Paint, Flat, Liquid, White, 1 gal

Drylok 00542 Powder Waterproofer, White, Powder, 35 lb, Pail

Henry PR176074 Foundation Coating, 5 gal Pail

Suggested Retail: $47.99

Suggested Retail: $49.99

Suggested Retail: $54.99

Zinsser Waterproofing Paint, Net Content: 1 gal, Liquid, White, Sheen: Flat, Compositions: Hydrous Magnesium Silicate, Titanium Dioxide, Dipropylene Glycol n-Propyl Ether, 2,2-Ethylenedioxydiethyl bis(2-Ethylhexanoate), Quartz, 2,2,4-Trimethyl-1,3-Pentanediol Monoisobutyrate, Aqueous Ammonia, Specific Gravity: 1.397, Flash Point: 94 deg C, VOC Content: 97 g/L, Boiling Point: 100 to 537 deg C, Flammability Rating: 1 DRYLOK? powdered masonry waterproofer is formulated to fill and seal porous masonry walls against water, even under pressure, by becoming an actual part of the original surface. An aggregate type material, DRYLOK? powdered masonry waterproofer is ideal as a base coat, as well as a finish coat. Environmentally friendly. Asphalt Emulsion. For spray or brush application to existing or new, green or damp concrete and masonry surfaces. For below-greade applications to foundations, both poured concrete and CMU block. No odor, soap and water cleanup.

Zinsser 306607 Mildewcide Additive, Liquid, Clear, 1 gal

Damtite 06350 Shield Penetrating Water Repellent, Clear, 1 gal, Bottle

Damtite 03550 Latex Waterproofer, White, Liquid, 1 gal, Pail

Suggested Retail: $54.99

Suggested Retail: $57.99

Suggested Retail: $59.99

Watertite? clear mold and mildewproof waterproofing paint forms an impermeable, smooth, non-pigmented barrier to water on bare masonry wall and floor surfaces. Intended for use on interior or exterior, vertical or horizontal, concrete block and cast-in-place concrete. Backed by a five years waterproof guarantee and mold and mildew proof paint film guarantee, it can be used to stop moisture from entering or exiting a concrete surface. Safe, odorless, clear penetrating sealer. Protects against water, ice and salt damage. High-performance masonry waterproofers used for above or below-grade applications. Alkali-resistant coating provides excellent waterproofing protection with a decorative finish for all masonry, cinder and concrete block, poured concrete, brick, stucco, basement, retaining walls and foundations. Fast drying, low odor, tintable and easy to clean up. Reduces radon gas penetration through concrete block walls. Covers up to 125 sq-ft/gal.

Dyco PAVER SEALER DYC7200/1 Waterproofing Sealer, Gloss, Liquid, Clear, 1 gal

SEALER MSNRY INT EXT NATL GAL - Case of 2

Henry RC065 Series RC065070 Foundation Coating, Black, Liquid, 4.75 gal Pail

Suggested Retail: $62.99

Suggested Retail: $64.99

Suggested Retail: $67.99

Dyco? Paver Sealer? is a solvent acrylic, "non-yellowing" water-proofing sealer designed to seal and protect bare/non-sealed cement pavers. Paver Sealer? gives a wet look appearance while enhancing the true colors of the paver. Paver Sealer? resists tire markings, cracking and peeling. Paver Sealer? is easy to apply and provides a mildew-resistant barrier. Dyco? 7200 cement Paver Sealer? is a solvent acrylic, non-yellowing clear sealer for sealing non-sealed or coated pavers. Paver Sealer? gives a wet look and enhances the true color of the paver. How to determine if your pavers have been sealed with a latex water base sealer: Test the surfaces by pouring a small amount of water on the surface. If it penetrates quickly, the surface is porous and ready for 7200 Paver Sealer?. If it does not and takes 2 to 20 min to penetrate, then do not apply 7200 Paver Sealer?. DRYLOK? natural look sealer is a non-yellowing protective coating that can be used as a sealer or concrete curing membrane. As a sealer, DRYLOK? natural look sealer penetrates deep to seal and protect masonry against acids, alkalis, road salts, de-icing compounds, household cleaners, gasoline, oil and weathering. Protects against dusting, staining and spalling. As a concrete hardener, When applied to freshly poured concrete, after the surface has set for 24 hrs and excess water has been removed, DRYLOK? natural look sealer will control water evaporation resulting in maximum concrete hardness. Cures to a tough, flexible, weather-resistant film. Because of its ability to retain its pliability, the coating resists damage which may result from expansion and contraction caused by weather and temperature variation. Use as an exterior underground foundation coating and dampproofer for brick, concrete, cement block and similar surfaces. May be used as an underground exterior foundation coating and dampproofer. Covers approximately 1 to 2 gal per 100 sq-ft.

Gardner 0125-GA Foundation and Roof Coating, Black, Liquid, 4.75 gal Pail

Damtite FiberWall 04852 Surface Bonding Cement, Gray, Powder, 50 lb Pail

Damtite Ultima 03560 Waterproofer, White, 1 gal

Suggested Retail: $72.99

A thin, liquid-applied coating designed to seal and penetrate exterior concrete and masonry surfaces while providing a moisture barrier. It can also be used as an anti-corrosive coating for below-grade steel or metal piping. Seals and protects wood footings from decay and termites. For exterior use only. FiberWall? is an alkali-resistant, fiberglass-reinforced, Portland cement-base surface bonding cement with sand, used for construction of concrete block walls by dry-stack (without mortar). It is also ideal to waterproof, strengthen, rehabilitate, reinforce, restore and beautify various existing deteriorating surfaces, including chimneys, retaining walls and other concrete, brick, stone, tile or stucco areas above and below grade, on the interior and exterior. Damtite Ultima is a low-odor, high-performance masonry waterproofer with a bright white finish. Ideal for interior and exterior, above and below grade applications. This durable, alkali-resistant coating provides excellent waterproofing protection with a slightly textured, decorative finish for all masonry, cinder and concrete block, poured concrete, brick, stone, stucco, basement, garage and retaining walls and foundations. No pre-mixing or pre-wetting is needed. Stops over 25 psi of hydrostatic water pressure. Fast drying with easy soap and water clean-up.

Damtite FiberWall 04851 Surface Bonding Cement, White, Powder, 50 lb Pail

Henry PR175070 Foundation Coating, Black, Liquid, 5 gal Pail

Damtite 01351 Powder Waterproofer, White, Powder, 35 lb Pail

Suggested Retail: $74.99

Suggested Retail: $77.99

Suggested Retail: $79.99

FiberWall? is an alkali-resistant, fiberglass-reinforced, Portland cement-base surface bonding cement with sand, used for construction of concrete block walls by dry-stack (without mortar). It is also ideal to waterproof, strengthen, rehabilitate, reinforce, restore and beautify various existing deteriorating surfaces, including chimneys, retaining walls and other concrete, brick, stone, tile or stucco areas above and below grade, on the interior and exterior. A cold applied liquid asphalt in a solvent system. Penetrating type coating formulated to provide a durable, weather-resistant film. For long wearing protection of foundation coating. Also use to dampproofing above and below-grade exterior concrete and masonry walls and foundations that are thoroughly dry. Covers 1.5 to 2 gal per 100 sq-ft. Depending upon the porosity and roughness of the surface. Heavy-duty, Portland cement-based waterproofing coating with dry polymer-modified additive for excellent adhesion. Eliminates need for liquid bonding additive to mix for non-porous, smooth surfaces. Ideal for sealing, protecting and decorating vertical walls and surfaces constructed of concrete, masonry, stone, brick or stucco. Eliminates dampness, resists mold/ mildew and flaking or chalking while beautifying and sealing all pores and voids. Formulated for application directly onto damp or wet surfaces.

Zinsser WATERTITE 05001 Block Filler Paint, Oil Base, White, 1 gal, Can, 75 to 100 sq-ft/gal Coverage Area

WATERPROOFER MSNRY INT EXT GAL - Case of 2

COATING FOUNDATION NONFBR .9G - Case of 4

Suggested Retail: $79.99

Suggested Retail: $82.99

WATERTITE? professional mold and Mildew-Proof? waterproofing paint has a unique oil-base formula that combines a state-of-the-art waterproofing resin with Portland cement to create a coating that stops up to 34 lb psi of water pressure. It also contains a mildewcide to prevent the growth of mold and mildew for a minimum of 10 years after application, making it great for basements and other masonry surfaces where mold and mildew can be problematic. latex base Drylok? Masonry waterproofer is the manageable way to solve water seepage problems. Reduces radon gas penetration by reducing vapor transfer. Premier 175 Foundation? coating non-fibered dries to a tough, flexible, weather-resistant film. Because of its ability to retain its flexibility, resists damage which may result from expansion and contraction caused by weather, temperature variation and normal building vibration.

Damtite 02551 Foundation Coating, Gray, Powder, 50 lb Pail

WATERPROOFER MSNRY INT EXT GAL - Case of 2

PROTECTOR CONCRETE CLEAR 1GAL - Case of 2

Suggested Retail: $82.99

Suggested Retail: $84.99

A gray Portland cement-base, waterproofing coating for sealing, protecting and decorating walls and surfaces constructed of poured concrete, concrete/cinder block, masonry, stone, brick or stucco. Ideal as parge coat for exterior, below-grade applications instead of using regular cement which does not waterproof. Safe coating for sealing the inside of drinking water concrete tanks and cisterns. Latex Base DRYLOK? Masonry waterproofer is the manageable way to solve water seepage problems. Reduces radon gas penetration by reducing vapor transfer. Just like natural and man-made stone, concrete and masonry are porous materials. They will start to break down, dust, pit, crack and/or stain easily when subjected to weather, water, oil and UV rays. The only way to prevent damage and deterioration is to protect surfaces with a good quality sealer. Latex-base Drylok? Concrete Protector provides clear, weatherproof protection against deterioration caused by de-icing salts, household cleaners, acid, gasoline, oil and weathering. Formulated with our exclusive SALTLOK? Technology, it penetrates into the surface and provides great resistance to unsightly efflorescence stains (salt deposits) that are often visible on brick, block and poured concrete surfaces.

Damtite 01211 Powder Waterproofer, White, Powder, 21 lb Pail

SEALER WATERPROOFING MSURFC G - Case of 4

Damtite 01551 Foundation Coating, White, Powder, 50 lb Pail

Suggested Retail: $85.99

Suggested Retail: $87.99

Suggested Retail: $89.99

A Portland cement-based, waterproofing coating for sealing, protecting & decorating wall sand surfaces constructed of poured concrete, concrete, cinder block, masonry, stone, brick or stucco. Safe coating for sealing the inside of drinking water concrete tanks and cisterns. Eliminates dampness, resists mold, mildew & flaking, chalking while beautifying and sealing all pores & voids. Unlike ready-mix paints which can only be applied to dry surfaces, this product is made for use on wet or dry surfaces. It also reduces Radon gas infiltration. Wear protective gloves and goggles. Beads water to resist moisture damage. Dries to clear finish, soap and water clean-up. Use on wood, brick, concrete, masonry, stucco and porous surfaces. Heavy-duty, Portland cement-base, waterproofing coating for sealing, protecting & decorating walls and surfaces constructed of poured concrete, concrete/cinder block, masonry, stone, brick or stucco. Safe coating for sealing the inside of drinking water concrete tanks and cisterns.

Henry 16376 Concrete Sealant, Liquid, Clear, 1 gal, Can

Henry 16377 Concrete Sealant, Liquid, Gray, 1 gal, Can

SEALER HI-GLOSS LATEX BASE - Case of 2

Suggested Retail: $92.99

Suggested Retail: $97.99

Henry? 635 is a high-performance, high-solids concrete sealer that is easy to apply, quick drying, nonflammable and UV stable. Applied at a minimum of two coats, Henry 635 is designed to protect all exterior absorbent concrete and masonry surfaces on residential and commercial applications, including driveways, sidewalks, patios, courtyards, walkways, pool decks and most vertical concrete surfaces. It is especially suited to seal Henry? toppings and the gray version can be used to create a uniform appearance over both a repaired area and the adjacent concrete or masonry surfaces. Henry 635 is durable and abrasion-resistant when applied properly. Henry? 635 is a high-performance, high-solids concrete sealer that is easy to apply, quick drying, nonflammable and UV stable. Applied at a minimum of two coats, Henry 635 is designed to protect all exterior absorbent concrete and masonry surfaces on residential and commercial applications, including driveways, sidewalks, patios, courtyards, walkways, pool decks and most vertical concrete surfaces. It is especially suited to seal Henry? toppings and the gray version can be used to create a uniform appearance over both a repaired area and the adjacent concrete or masonry surfaces. Henry 635 is durable and abrasion-resistant when applied properly. DRYLOK? WetLook high-gloss sealer Just like natural and man-made stone, concrete and masonry are porous materials that will start to break down, dust, pit, crack and/or stain when subjected to weather, water, oil and UV rays. The only way to prevent damage and deterioration is to protect your surfaces with a good quality sealer. DRYLOK? wet look high-gloss sealer is a clear, non-yellowing, water-base sealer formulated for use on horizontal and vertical masonry surfaces where a high-gloss, WetLook finish is desired.


	1 2 3