CONCRETE SEALERS

Home > PAINT & SUNDRIES > PAINT & STAINS > WATERPROOFERS & SEALERS > CONCRETE SEALERS

Sort By:

Damtite 06350 Shield Penetrating Water Repellent, Clear, 1 gal, Bottle

Dyco PAVER SEALER DYC7200/1 Waterproofing Sealer, Gloss, Liquid, Clear, 1 gal

SEALER MSNRY INT EXT NATL GAL - Case of 2

Suggested Retail: $57.99

Suggested Retail: $62.99

Suggested Retail: $64.99

Safe, odorless, clear penetrating sealer. Protects against water, ice and salt damage. Dyco? Paver Sealer? is a solvent acrylic, "non-yellowing" water-proofing sealer designed to seal and protect bare/non-sealed cement pavers. Paver Sealer? gives a wet look appearance while enhancing the true colors of the paver. Paver Sealer? resists tire markings, cracking and peeling. Paver Sealer? is easy to apply and provides a mildew-resistant barrier. Dyco? 7200 cement Paver Sealer? is a solvent acrylic, non-yellowing clear sealer for sealing non-sealed or coated pavers. Paver Sealer? gives a wet look and enhances the true color of the paver. How to determine if your pavers have been sealed with a latex water base sealer: Test the surfaces by pouring a small amount of water on the surface. If it penetrates quickly, the surface is porous and ready for 7200 Paver Sealer?. If it does not and takes 2 to 20 min to penetrate, then do not apply 7200 Paver Sealer?. DRYLOK? natural look sealer is a non-yellowing protective coating that can be used as a sealer or concrete curing membrane. As a sealer, DRYLOK? natural look sealer penetrates deep to seal and protect masonry against acids, alkalis, road salts, de-icing compounds, household cleaners, gasoline, oil and weathering. Protects against dusting, staining and spalling. As a concrete hardener, When applied to freshly poured concrete, after the surface has set for 24 hrs and excess water has been removed, DRYLOK? natural look sealer will control water evaporation resulting in maximum concrete hardness.

Damtite FiberWall 04852 Surface Bonding Cement, Gray, Powder, 50 lb Pail

Damtite FiberWall 04851 Surface Bonding Cement, White, Powder, 50 lb Pail

PROTECTOR CONCRETE CLEAR 1GAL - Case of 2

Suggested Retail: $72.99

Suggested Retail: $74.99

Suggested Retail: $84.99

FiberWall? is an alkali-resistant, fiberglass-reinforced, Portland cement-base surface bonding cement with sand, used for construction of concrete block walls by dry-stack (without mortar). It is also ideal to waterproof, strengthen, rehabilitate, reinforce, restore and beautify various existing deteriorating surfaces, including chimneys, retaining walls and other concrete, brick, stone, tile or stucco areas above and below grade, on the interior and exterior. FiberWall? is an alkali-resistant, fiberglass-reinforced, Portland cement-base surface bonding cement with sand, used for construction of concrete block walls by dry-stack (without mortar). It is also ideal to waterproof, strengthen, rehabilitate, reinforce, restore and beautify various existing deteriorating surfaces, including chimneys, retaining walls and other concrete, brick, stone, tile or stucco areas above and below grade, on the interior and exterior. Just like natural and man-made stone, concrete and masonry are porous materials. They will start to break down, dust, pit, crack and/or stain easily when subjected to weather, water, oil and UV rays. The only way to prevent damage and deterioration is to protect surfaces with a good quality sealer. Latex-base Drylok? Concrete Protector provides clear, weatherproof protection against deterioration caused by de-icing salts, household cleaners, acid, gasoline, oil and weathering. Formulated with our exclusive SALTLOK? Technology, it penetrates into the surface and provides great resistance to unsightly efflorescence stains (salt deposits) that are often visible on brick, block and poured concrete surfaces.

Henry 16376 Concrete Sealant, Liquid, Clear, 1 gal, Can

Henry 16377 Concrete Sealant, Liquid, Gray, 1 gal, Can

SEALER HI-GLOSS LATEX BASE - Case of 2

Suggested Retail: $92.99

Suggested Retail: $97.99

Henry? 635 is a high-performance, high-solids concrete sealer that is easy to apply, quick drying, nonflammable and UV stable. Applied at a minimum of two coats, Henry 635 is designed to protect all exterior absorbent concrete and masonry surfaces on residential and commercial applications, including driveways, sidewalks, patios, courtyards, walkways, pool decks and most vertical concrete surfaces. It is especially suited to seal Henry? toppings and the gray version can be used to create a uniform appearance over both a repaired area and the adjacent concrete or masonry surfaces. Henry 635 is durable and abrasion-resistant when applied properly. Henry? 635 is a high-performance, high-solids concrete sealer that is easy to apply, quick drying, nonflammable and UV stable. Applied at a minimum of two coats, Henry 635 is designed to protect all exterior absorbent concrete and masonry surfaces on residential and commercial applications, including driveways, sidewalks, patios, courtyards, walkways, pool decks and most vertical concrete surfaces. It is especially suited to seal Henry? toppings and the gray version can be used to create a uniform appearance over both a repaired area and the adjacent concrete or masonry surfaces. Henry 635 is durable and abrasion-resistant when applied properly. DRYLOK? WetLook high-gloss sealer Just like natural and man-made stone, concrete and masonry are porous materials that will start to break down, dust, pit, crack and/or stain when subjected to weather, water, oil and UV rays. The only way to prevent damage and deterioration is to protect your surfaces with a good quality sealer. DRYLOK? wet look high-gloss sealer is a clear, non-yellowing, water-base sealer formulated for use on horizontal and vertical masonry surfaces where a high-gloss, WetLook finish is desired.

SEALER CONCRETE WET LOOK 1 GAL - Case of 2

SEALER CONCRETE NATRAL LOOK 1G - Case of 2

SEALER CNCRT WTRPRF NAT LK 1GA - Case of 4

Suggested Retail: $119.99

ROCKSOLID? wet look concrete sealer seals and protects concrete and masonry surfaces from the damaging effects of water, chemicals and UV light. The water-base, film-forming formula provides a protective barrier to keep water out, protect against stains and extend the life of your concrete while leaving a wet look, high-gloss finish. ROCKSOLID? natural look concrete sealer seals and protects concrete and masonry surfaces from the damaging effects of water, chemicals and UV light. The water-base, film-forming formula provides a protective barrier to keep water out, protect against stains and extend the life of your concrete while leaving a natural look, low-gloss finish. Quikrete? concrete and masonry waterproofing sealer is a water-based, highly water-resistant, silicone formulation designed to waterproof and seal without changing the surface appearance.

Drylok 22115 Natural Look Sealer, Clear, Liquid, 5 gal, Pail

MOISTURE STOP 1 GALLON - Case of 4

SEALER CNCRT EXT NTRL LOOK GAL - Case of 4

Suggested Retail: $139.99

Suggested Retail: $179.99

DRYLOK? natural look sealer is a non-yellowing protective coating that can be used as a sealer or concrete curing membrane. As a sealer, DRYLOK? natural look sealer penetrates deep to seal and protect masonry against acids, alkalis, road salts, de-icing compounds, household cleaners, gasoline, oil and weathering. Protects against dusting, staining and spalling. As a concrete hardener, When applied to freshly poured concrete, after the surface has set for 24 hrs and excess water has been removed, DRYLOK? natural look sealer will control water evaporation resulting in maximum concrete hardness. Rust-Oleum Moisture stop penetrates into concrete and reacts with the free calcium and water to form a gel in cracks, pores and capillaries to protect against the ingress of water and contaminants. This allows surfaces that were previously uncoatable, due to moisture, to be coated. Valspar? natural look protective sealer locks out weather and scuffs with a tough, penetrating layer of invisible protection.

SEALER CNCRT EXT WTR BS GLO GA - Case of 4

Drylok 29915 Concrete Protector, Satin, Liquid, 5 gal

Valspar 024.0082390.008 Sealer, Liquid, 5 gal Pail

Suggested Retail: $179.99

Suggested Retail: $199.99

Valspar? wet look high-gloss sealer waterproofs and enhances the color and design of aggregate, masonry, brick, slate and pavers with a glossy, wet-look sheen. As durable as it is beautiful, it protects against the sun's powerful rays, damaging weather, water, gasoline and de-icing salts. Just like natural and man-made stone, concrete and masonry are porous materials. They will start to break down, dust, pit, crack and/or stain easily when subjected to weather, water, oil and UV rays. The only way to prevent damage and deterioration is to protect surfaces with a good quality sealer. Latex-base Drylok? Concrete Protector provides clear, weatherproof protection against deterioration caused by de-icing salts, household cleaners, acid, gasoline, oil and weathering. Formulated with our exclusive SALTLOK? Technology, it penetrates into the surface and provides great resistance to unsightly efflorescence stains (salt deposits) that are often visible on brick, block and poured concrete surfaces. Valspar wet look high gloss sealer waterproofs and enhances the color and design of concrete, brick, masonry, slate and pavers with a glossy, wet-look sheen. This sealer is formulated to protect your exterior surfaces against the sun's UV rays and damaging weather. Resists gasoline, oil and de-icing salts.

Damtite ClearShield Series 06450 Sealer, Clear, Liquid, 5 gal, Pail

Dyco PAVER SEALER DYC7200/5 Waterproofing Sealer, Gloss, Liquid, Clear, 5 gal

Suggested Retail: $199.99

Suggested Retail: $269.99

ClearShield is an odorless water-based sealer formulated to penetrate the surface of concrete, brick, mortar, tile, stucco and other masonry surfaces. It forms a water repellent shield for long-lasting wear. It can be used on vertical and horizontal above-grade surfaces, interior and exterior. ClearShield protects concrete driveways and walks against adverse effects of deicing salts, water, ice and weathering damage. It will not discolor concrete. White in container but dries clear on surface. Dyco? Paver Sealer? is a solvent acrylic, "non-yellowing" water-proofing sealer designed to seal and protect bare/non-sealed cement pavers. Paver Sealer? gives a wet look appearance while enhancing the true colors of the paver. Paver Sealer? resists tire markings, cracking and peeling. Paver Sealer? is easy to apply and provides a mildew-resistant barrier. Dyco? 7200 cement Paver Sealer? is a solvent acrylic, non-yellowing clear sealer for sealing non-sealed or coated pavers. Paver Sealer? gives a wet look and enhances the true color of the paver. How to determine if your pavers have been sealed with a latex water base sealer: Test the surfaces by pouring a small amount of water on the surface. If it penetrates quickly, the surface is porous and ready for 7200 Paver Sealer?. If it does not and takes 2 to 20 min to penetrate, then do not apply 7200 Paver Sealer?.


	1